Utah MOTORCYCLE DMV Practice Test 7
Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Utah DMV exam is by taking our free practice tests. The following question are from real Utah DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
To discourage automobile drivers from trying to share your lane, ride in the center portion of the lane.
Because of their size, motorcycles may seem to be traveling faster than they actually are.
In Utah, all motorcycles must have one headlamp; one taillamp; either a taillamp or separate lamp to illuminate the rear license plate with a white light; one red reflector on the rear; one stop lamp; a braking system; a horn or other warning device; a muffler and emission system; a mirror; tires with tread depths of at least 2/32 of an inch; footrests (if the motorcycle is meant to carry passengers); handlebars; and turn signals (if manufactured after 1973).
The front brake of a motorcycle is more powerful than the rear brake. It can provide at least three-quarters of the motorcycle's total stopping power.
Instead of or in addition to mechanical turn signals, operators may use hand signals to indicate turns or stops. If an operator's left arm is bent at the elbow and pointing upward, it means the operator plans to turn right or change lanes to the right.
In Utah, the law requires operators to signal their intentions at least two seconds before beginning a turn or lane change.
The brake light of a motorcycle is usually not as noticeable as the brake lights of a car. Flashing your brake light before slowing or stopping can help other drivers notice that you are about to brake.
When a group of motorcyclists is passing another vehicle on a two-lane road, the riders should pass the vehicle one at a time. Each motorcyclist should complete their pass before the next rider's pass begins.
Choose a helmet that meets U.S. Department of Transportation (DOT) and state standards. It should fit you snugly all the way around and be free of obvious defects.
The front brake of a motorcycle is more powerful than the rear brake. The front brake supplies at least 70 percent of a motorcycle's total stopping power.
You should wear appropriate protective clothing when riding. Protective garments include sturdy pants and jackets that entirely cover your arms and legs, boots or heavy shoes that cover and support your ankles, and sturdy gloves.
If one of your tires fails, hold the handgrips firmly and begin to slow down by easing off the throttle while maintaining a straight course. If you must brake, gradually apply the brake of the tire that is still good, if you are sure of which tire that is. Edge toward the side of the road as you slow down, squeeze the clutch, and stop.
Because of a passenger's additional weight, a motorcycle will respond more slowly with a passenger on board than with just one occupant. With a passenger, you should travel a bit more slowly than you normally would, start slowing sooner than you normally would, and increase your following distance. Always warn your passenger of any special conditions ahead.
To be effective, eye protection and face shields must be free of scratches; be resistant to penetration; give a clear view to either side; fasten securely; permit air to pass through; and permit enough room for eyeglasses or sunglasses to be worn underneath.
Choose riding boots or shoes that are high and sturdy enough to cover and support your ankles. Choose footwear with soles made of hard, durable, slip-resistant material.
The clutch lever of a motorcycle is generally located on the left handgrip. Be familiar with the locations of all controls before beginning to ride a motorcycle.
The risk of head and neck injuries is greatly reduced by wearing a high-quality helmet. A helmet is a rider's best defense against injury in the case of an accident.
When passing a row of parked cars, it is often safest to ride in the left portion of your lane. Riding in the left portion will keep you farthest from any opening car doors, people stepping out from between cars, and cars pulling out of parking spaces.
On average, a person's body can eliminate the alcohol content of about one drink per hour. However, it is still possible for alcohol to accumulate in a person's system even if they consume only one drink per hour. This accumulation can still affect their ability to ride safely.
In general, there is no single best lane position. No portion of the lane need be avoided at all times. Position yourself in the portion of the lane where you are most likely to be seen and you can maintain a cushion of space around you.
The clothes you wear when riding a motorcycle should protect you from sunburn, windburn, rain, dehydration, cold, and parts of the motorcycle. Your clothing should provide you with additional protection in the case of a crash.
If a hazard requires you to brake and swerve to avoid a collision, you should take the actions separately. Do not brake while swerving because doing so may cause your motorcycle to fall over.
Most drivers do not look at their side mirrors as often as they look at their rearview mirror. Therefore, when following a car, it is generally best to ride in the center portion of the lane where you are most likely to be visible in the driver's rearview mirror.
To reduce the danger of fatigue when riding, dress to protect yourself against tiring weather conditions, such as wind and rain. Limit yourself to no more than about six hours of riding per day and stop for a break at least once every two hours. Avoid taking artificial stimulants since you may experience extreme fatigue when they start to wear off.
A windshield is not an adequate substitute for the protection offered by goggles or a face shield. Most windshields will not protect your eyes from the wind.
- 0Incorrect (5 allowed to pass)
- 0Correct