Idaho MOTORCYCLE DMV Practice Test 1

When preparing to pass a vehicle on the left, you should ride in the left portion of your lane. Doing this will increase your line of vision and help drivers in the next lane anticipate your move.

Long-term exposure to wind noise can permanently damage your hearing. Using proper ear plugs or other hearing protection when riding is recommended.

Leather boots provide the best degree of protection when riding. They should be high and sturdy enough to cover and support your ankles.

Googles will protect your eyes from the wind, but most windshields will not. A windshield is not an adequate substitute for goggles or a face shield.

Motorcycles often seem to attract dogs. If you are being chased by a dog, downshift and approach it slowly. Then, as you approach the dog, accelerate and leave it behind.

Warning signs are yellow with black lettering or symbols and provide important information to motorists about upcoming road conditions. This sign warns that the roadway ahead is likely to be slippery when wet.

In comparison to flat mirrors, convex mirrors provide a wider view of the road behind you. They also make objects seem farther away than they actually are. Take the time to get used to your mirrors if your motorcycle is equipped with convex mirrors.

A plastic, shatter-resistant face shield provides protection for your entire face. A windshield is not an adequate substitute for a good face shield.

If you are passing a row of parked vehicles to your right and there is no oncoming traffic to your left, you should ride in the left portion of your lane. This will help you avoid hazards, such as car doors that are opening and pedestrians who are stepping out from between vehicles. If there is oncoming traffic, it is best to remain in the center portion of your lane to maximize the amount of space around you.

Look through every turn by turning just your head, not your shoulders, and keeping your eyes level with the horizon.

Engines seize when they are low on oil. Without oil, the engine’s moving parts cannot move smoothly against each other and the engine overheats.

If the throttle becomes stuck and you are unable to free it, immediately operate the engine cut-off switch and pull in the clutch at the same time. This will remove power from the rear wheel until you are able to safely leave the road and stop.

If you are being passed either from behind or by an oncoming vehicle, stay in the center portion of your lane. Riding any closer to the passing driver could place you both in a hazardous situation.

To ensure control when making a turn, you should reduce your speed before entering the turn. Look through the turn in the direction you want to move, press on the handle grip to lean in the appropriate direction, and roll on the throttle through the turn to stabilize suspension.

Check your clutch and throttle before riding your motorcycle. The throttle should snap back when you let go and the clutch should feel tight and smooth.

Perform safety checks before every motorcycle ride. Test your brake controls individually to make sure each one activates the brake lights.

Warning signs are yellow with black lettering or symbols and provide important information to motorists about upcoming road conditions. This sign warns that a stop sign is ahead.

Before changing lanes, make sure no other drivers are going to be in your path. Do this by checking your mirrors and looking over your shoulder in the direction you want to move.

Impairment of your ability to ride safely begins with the first drink you take. You can be convicted of riding impaired even if you are below the legal blood alcohol limit.

When approaching a blind intersection, move into the portion of the lane that will bring you into any other driver's field of vision at the earliest possible moment.

It is best to change gears before starting a turn. However, if you must shift while turning, shift smoothly. A sudden change in power to the rear wheel can cause a skid.

If you lock the front wheel while braking, release the brake and immediately re-apply it.

If your motorcycle begins to weave while you are traveling over bridge gratings, you should simply maintain a steady speed and proceed straight across the surface. Trying to stay in your lane while riding in a zigzagging motion is dangerous.

Riding with your headlight activated is the best way to help other road users see your motorcycle. Always be sure your headlight works before starting your trip.

SIPDE is a five-step process that experienced riders use to make judgements and take action while traveling. The letters in SIPDE stand for Scan, Identify, Predict, Decide, and Execute.