Tennessee MOTORCYCLE DMV Practice Test 1
Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Tennessee DMV exam is by taking our free practice tests. The following question are from real Tennessee DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
Exposure to engine and wind noise can damage your hearing, even if you are wearing a helmet. Wearing hearing protection while riding is always a good idea.
Motorcycles have blind spots, just like cars. You should always turn your head to check your blind spot before changing lanes.
Use hand signals when bright sunlight makes your mechanical signals difficult for other drivers to see. It is extremely important to clearly communicate with other road users.
Following too closely, or "tailgating," can be a major factor in collisions caused by motorcycles. When riding behind another vehicle, maintain a safe following distance.
A person with a blood alcohol content (BAC) of 0.08 percent or higher is considered legally intoxicated. It is both illegal and dangerous to operate a motor vehicle while under the influence of alcohol.
Maintaining an adequate space cushion ensures that you will have time to respond if another driver makes a mistake. A cushion of space also allows you the space you need to safely maneuver your motorcycle.
Wearing brightly-colored or reflective clothing can increase your chances of being seen by other road users.
A motorcycle is defined by law as any two- or three-wheeled vehicle with an engine displacement of no more than 125 cubic centimeters. An operator must hold a motorcycle license to operate a motorcycle.
Loads should be kept over, or in front of, the rear axle. Only experienced riders should carry loads on their motorcycle.
When riding in a group, it is generally best to travel in a staggered formation. This formation allows riders to remain in close ranks while still maintaining safe following distances.
To swerve away from a hazard, apply a small amount of pressure to the handgrip located on the side of your intended escape.
The skills a person needs to ride safely decrease as the amount of alcohol consumed increases. If you have consumed alcohol in any amount, it is safest not to ride your motorcycle.
Reduce your speed before entering a turn. If you take a turn too fast, you may end up veering out of your lane or even off the road.
Maintaining a cushion of space around your motorcycle at all times helps ensure that you will have time to react and space to maneuver if someone else on the road makes a mistake.
Anticipate potential problems that can be created by factors on the roadway. Make a plan to reduce their risks.
Georgia law requires a rider to wear eye protection when on a moving motorcycle. A full face shield provides a rider with the best possible protection.
Riding with your headlight activated is the best way to help other road users see your motorcycle. Always be sure your headlight works before starting your trip.
Motorcycle riders should use their brake lights to communicate with other road users. It is particularly important for a motorcyclist to flash their brake light before slowing down to make a tight, fast turn off of a high-speed roadway. Motorcyclists should flash their brake lights when slowing in any location where other drivers may not expect them to slow down.
Many drugs, including prescription and over-the-counter medications, can impair your ability to ride safely. Some medications become even more dangerous when combined with alcohol.
In California, it is illegal for a person age 21 or older to operate a motorcycle with a blood alcohol content (BAC) of 0.08 percent or higher. For a person under the age of 21, it is illegal to operate a motorcycle with a BAC of 0.01 percent or higher. It may be unsafe to operate a motorcycle even if you are under the legal limit.
A head or neck injury is always a risk when riding a motorcycle, regardless of your speed of travel. With few exceptions, the risk of head and neck injuries is greatly reduced by properly wearing a quality helmet.
While some people believe that a helmet will limit their vision, this is not the case. Any U.S. Department of Transportation-approved helmet will allow the wearer to see as far as is needed for safe riding.
If steering suddenly feels heavy, it is possible that your front tire has gone flat. Stop riding and check your tires as soon as possible.
To get the best possible protection, choose a helmet that meets U.S. Department of Transportation (DOT) and state standards. It should fit snugly all the way around and be free of obvious defects, like cracks, loose padding, and frayed straps.
Long-term exposure to engine and wind noise while riding can lead to hearing damage, even if you wear a full-face helmet. Using hearing protection is advised to prevent damage.
The greatest potential for conflict between you and other traffic exists at intersections.
Any time a motorcycle is leaning, such as in a turn or curve, there is less traction available for braking. Both brakes may still be used while a motorcycle is turning, but it must be done with great care.
To have proper riding posture, position yourself so that you are using your arms to steer rather than to hold yourself up. Sit so that your elbows are slightly bent when you hold the handgrips.
All curves are different. When taking a curve, choose a lane position that is appropriate for conditions and adjust as needed.
Motorcyclists should maintain a minimum two-second following distance under normal conditions. Any time conditions are less than perfect, a larger following distance is recommended.
- 0Incorrect (6 allowed to pass)
- 0Correct