Utah MOTORCYCLE DMV Practice Test 8
Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Utah DMV exam is by taking our free practice tests. The following question are from real Utah DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
You should not rely on eye contact to guarantee that a driver will yield to you. It is not uncommon for a driver to look directly at a motorcyclist and still fail to actually notice them.
To reduce the risk of being involved in a crash, ensure that you are visible to others on the road. Communicate your intentions through your turn signals, brake light, and lane position. Maintain an adequate space cushion, scan your path of travel 12 seconds ahead of your vehicle, and be prepared to act if any hazards arise.
When being passed, it is generally a good idea to ride in the center portion of your lane. Being on the side nearest the passing vehicle increases your risk of a collision. Being on the side farthest from the passing vehicle may prompt the other driver to merge back into your lane before it is safe.
Hand signals are an important part of communication when riding in groups. This hand signal means "follow me."
When being passed, you should not ride on the side of your lane that is farthest from the passing vehicle. Doing so may tempt the driver to return to your lane before there is actually room for them to do so safely.
Motorcycle brake lights are more difficult to see than the brake lights of larger vehicles, so flashing your brake light may help other drivers to notice it. You should flash you brake light before slowing down where other drivers may not expect you to slow down, such as in the middle of a block or when approaching an alley.
The cornering characteristics of a three-wheeled motorcycle or a motorcycle with a sidecar differ from those of a two-wheeled motorcycle.
Conduct a thorough pre-ride inspection before every ride. It should usually take only a few minutes.
Wearing a helmet is the single most effective thing you can do to reduce the risk of head or neck injuries in the event of a crash.
If your motorcycle fits you properly, your feet should be able to reach the ground while you are seated. When riding your motorcycle, keep your feet firmly on the footrests.
Like any other vehicle, a motorcycle has blind spots that cannot be seen by a rider using their mirrors. A motorcyclist should always turn their head to check for vehicles or other hazards in their blind spot before changing lanes.
The center of a lane can be especially hazardous when wet. When it begins to rain, avoid the center of the road by riding in the tire tracks left by cars. The left tire track is often the best option.
Engine braking by smoothly downshifting can be a useful option for motorcyclists. If you choose to engine brake, apply your brake lights separately to let other drivers know that you are slowing down.
Give plenty of room to vehicles merging onto a highway from an entrance ramp. Merge into a lane farther away from the entrance ramp, if necessary. If it is not possible to change lanes, adjust your speed to allow room for the vehicle to safely enter the highway.
An effective face shield should be free of scratches, be resistant to penetration, allow clear views to both sides, fasten securely, permit air to pass through, and provide enough space for eyeglasses or sunglasses to be worn underneath. It is important for a face shield to permit the passage of air because an airtight face shield can create fogging and make it difficult for a rider to see.
You should wear reflective materials when riding at night to make yourself more visible to other road users.
To help reduce your reaction time, you should cover the clutch and brakes. This is especially helpful when riding through areas where potential hazards are likely.
It is important to do a thorough inspection of your motorcycle before every ride. This will usually take you only a few minutes.
Open up your following distance if your motorcycle will require a longer distance than normal to stop. Additionally, if you are riding in heavy traffic or if you cannot see through the vehicle in front of you, you should also increase your following distance.
Never assume that other drivers see you, even if they make eye contact with you. It is not uncommon for drivers to look directly at a motorcyclist and still fail to notice them. Always reduce your speed when approaching an intersection.
Motorcycle headlights are generally smaller and less powerful than those of cars.
A plastic, impact-resistant face shield provides the greatest degree of protection for a wearer's eyes and face. Eyeglasses or sunglasses are not an adequate substitute. In Vermont, you are not legally required to wear eye or face protection if your motorcycle has a windshield, though it is recommended.
Before transporting a passenger or heavy load in traffic for the first time, practice riding on a quiet road to get used to how your motorcycle handles differently with the additional weight.
Oily drippings from cars and trucks collect in a strip in the center portion of a lane. This strip usually still provides enough traction for motorcyclists to operate safely, except when the road is wet. The strip is usually narrow enough that you can ride to its side and still be in the center portion of the lane.
Like alcohol, many other drugs (including prescription medications, over-the-counter medications, and illegal drugs) have side effects that may impair your ability to ride safely.
- 0Incorrect (5 allowed to pass)
- 0Correct