Utah MOTORCYCLE DMV Practice Test 3
Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Utah DMV exam is by taking our free practice tests. The following question are from real Utah DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
The two main types of helmets are three-quarter and full-face. Wearers can get the maximum protection from a full-face helmet.
Adjust your mirrors so you can see the lane behind you and as much as possible of the lane next to you. When properly adjusted, a mirror may show the edge of your arm or shoulder, but it’s the road behind you and to the side of you that is most important.
Pre-ride motorcycle inspections are an important part of ensuring safe riding. Hydraulic fluids and coolants should be checked at least once a week.
Riding in cold weather for long periods of time can cause severe chill, fatigue, and even hypothermia. Be sure to wear proper clothing to protect you from the elements.
Because road and traffic conditions are always changing, the safest lane position is also always changing. Choose the position that will maximize your space cushion and allow other drivers to see you most easily.
A small mechanical fault can have more serious consequences on a motorcycle than on a car. Conduct a thorough pre-ride inspection of your motorcycle before every ride.
Under normal conditions, you should maintain a following distance of at least two seconds. Increase your following distance any time conditions are less than perfect.
To increase your chances of being seen at an intersection, leave your headlight turned on and ride in a lane position that most easily allows oncoming traffic to see you. Maintain a space cushion that allows you to take evasive action if necessary. Never assume that another driver sees you, even if you make eye contact with the driver.
By riding in the center portion of your lane, you will ensure that there is not a large space on either side of your motorcycle. Minimizing those spaces can help deter drivers from trying to share the lane with you.
Before setting out on a ride, you should make sure that your motorcycle's fuel supply valve is open. If the fuel valve is closed, the engine may still start with the fuel that is remaining in the lines from a previous ride, but it will stall once the lines are empty.
For your protection, you should always wear a long-sleeved jacket made of appropriate material when riding. This is true even in warm weather because wearing a jacket is important to help prevent dehydration. You should also always wear long pants, and tuck in the laces of your footwear to prevent them from catching on the motorcycle.
A person who is age 21 or older with a blood alcohol concentration (BAC) of 0.08 percent or higher is considered legally intoxicated. It is illegal and dangerous to operate any motor vehicle while intoxicated.
If you over-apply your brakes, you may lose traction on one or both wheels and crash.
Wearing goggles provides protection for your eyes, but not for the rest of your face. A face shield provides protection for your whole face and is recommended above goggles. A windshield is not an adequate substitute for a face shield or goggles.
Swerving is a quick maneuver that requires a lot of traction in order to be safely executed. Making sudden moves, such as swerving, on slippery surfaces should be avoided.
Maintaining a cushion of space on all sides of your motorcycle helps to ensure that you have time and space to react if another road user makes a mistake.
If you cannot avoid hitting an obstacle in the roadway, you should try to hit it at as close to a 90-degree angle as possible. Slow down as much as you can before contact, keep your motorcycle upright, rise slightly off of your seat, and roll the throttle slightly to lighten the front end just before impact.
You should use a tire gauge to check the tire pressure before every ride. An under-inflated tire may still look okay, so a visual check is not enough.
When riding on slippery surfaces, you should use both brakes to slow down. Squeeze the brake lever gradually to avoid locking the front wheel and use gentle pressure on the rear brake.
Passes must be completed within posted speed limits. Only pass where it is safe and legal to do so.
To reduce the risk of a crash, you should always ensure that you are visible to others. Communicate your intentions through proper use of your signals, brake light, and lane position. Maintain a space cushion around your motorcycle and consistently scan the road ahead of, behind, and next to your vehicle. Always be ready to avoid an unexpected hazard.
If either of your tires go flat while you are riding, hold the handgrips firmly, ease off the throttle, and maintain a straight course. If you need to brake, gradually apply the brake to the tire that is not flat. As you slow down, edge to the side of the road, squeeze the clutch, and stop.
When you are being passed from behind or by an oncoming vehicle, stay in the center portion of your lane. Riding any closer to the passing vehicle can put you in danger.
When approaching a blind intersection that is controlled by a stop line or stop sign, you must first stop where indicated. You may then edge forward and stop again just short of where the cross traffic lane meets your lane. From that position, lean your body forward and look around buildings, parked cars, or bushes to see if anything is approaching. Make sure your front wheel stays out of the crossroad while you are looking.
Passing must be completed within the posted speed limits, and only in areas where passing is safe and legal.
- 0Incorrect (5 allowed to pass)
- 0Correct