Kentucky MOTORCYCLE DMV Practice Test 1

To reduce the risk of being involved in a crash, you should always ensure that you are visible to others. Communicate your intentions through proper use of your signals, brake light, and lane position. Maintain a space cushion around your motorcycle and consistently scan the road ahead of, behind, and next to your vehicle.

While a staggered formation is usually best for group riding, a group should switch into a single-file formation when taking curves, turning, or entering or exiting a highway.

To protect yourself against injury, you should wear a DOT-compliant helmet; face or eye protection; a jacket and long pants made of sturdy material; boots or shoes that are high and sturdy enough to cover and support your ankles; and gloves made of durable material.

Before riding while carrying a passenger, you should instruct your passenger to lean with you through turns and curves. They should hold onto your waist, hips, or belt.

Trying to enter a curve or turn at a speed that is too fast for conditions may cause you to cross into another lane of traffic or leave the road entirely.

A properly chosen lane position should provide a number of benefits, including an increased ability to see others and to be seen. It should help you avoid wind blasts, other drivers' blind spots, and surface hazards. Your lane position should discourage other drivers from trying to share your lane and provide you with an escape route, should a hazard arise.

When being passed, motorcyclists should be careful not to be hit by any part of the passing vehicle, including its mirrors. In addition to the vehicle itself, motorcyclists should be aware of wind gusts coming from the passing vehicle and potential objects being thrown by a passenger in the vehicle who may not be paying attention to the road.

Give plenty of room to vehicles merging onto a highway from an entrance ramp. Merge into a lane farther away from the entrance ramp, if necessary. If it is not possible to change lanes, adjust your speed to allow room for the vehicle to safely enter the highway.

While some people worry that wearing a helmet may dangerously limit their field of vision, this is not the case. Any approved helmet will let the operator see as far to the sides as is needed for safe riding.

A properly chosen lane position should provide a number of benefits, including an increased ability to see others and to be seen. It should help you avoid wind blasts, other drivers' blind spots, and surface hazards. Your lane position should discourage other drivers from trying to share your lane and provide you with an escape route, should a hazard arise. Choose a lane position that maximizes your space cushion.

A number of surfaces can provide poor traction for tires. Wet pavement; roads covered in loose gravel or sand; muddy, snowy, or icy areas; painted lane markings; and metal covers and plates in the road can be more hazardous for a motorcyclist than dry pavement.

Most motorcycle crashes occur in broad daylight. Increasing your visibility by wearing bright colors and reflective materials is a good idea at all times.

A motorcycle requires more frequent attention than a car. Make a complete check of your motorcycle before every ride.

Riding next to parked cars presents a number of potential dangers. A driver might pull out of parking space and into your path without looking. Car doors may be opened into your lane and pedestrians may step out from between cars.

To reduce the risk of a collision when riding at night, be sure to reduce your speed and increase your following distance. Use the headlights of vehicles ahead of you to see farther down the road. You should always be flexible about your lane position, especially when riding at night.

When preparing to pass on the left, you should ride in the left portion of your lane. This lane position will increase your line of sight and make your more visible to oncoming traffic.

When approaching a blind intersection that is controlled by a stop line or stop sign, you must first stop where indicated. You may then edge forward and stop again just short of where the cross traffic lane meets your lane. From that position, lean your body forward and look around buildings, parked cars, or bushes to see if anything is approaching. Make sure your front wheel stays out of the crossroad while you are looking.

To increase your chances of being seen, wear brightly-colored clothing, use your headlight at all times, and use your turn signals.

To regain control of a locked rear wheel, the brake must be released. However, if you accidentally lock the rear brake on a good traction surface, you can keep it locked until you have completely stopped.

While a staggered formation is usually best under normal riding conditions, a group of riders should switch to a single-file formation when taking curves, turning, or entering or exiting a highway.

To protect yourself against injury, you should wear a DOT-compliant helmet; face or eye protection; a jacket and long pants made of sturdy material; boots or shoes that are high and sturdy enough to cover and support your ankles; and gloves made of durable material.

When approaching a blind intersection, move into the part of the lane that will bring you into an oncoming driver's field of vision at the earliest possible moment. For example, when approaching a blind corner to your right, you may be seen sooner if you are in the left portion of your lane and not in the center portion.

To reduce your risk of being involved in a crash, you must ensure that you are visible to others on the road and that other drivers understand what you're planning to do. Clearly communicate your intentions through proper signaling and lane positioning. Maintain an adequate space cushion and scan your path of travel, identifying upcoming hazards and being prepared to react.

A motorcycle passenger needs to understand how to ensure a safe ride ride for both themselves and the operator. An operator should never assume the passenger already knows what to do. Give a passenger complete instructions before every ride.

Any time a driver may be tempted to try to squeeze into your lane next to you, ride in the center portion of the lane to discourage them from doing so.

Develop the habit of using both brakes every time you slow or stop. If you need to stop quickly, it is best to apply both brakes. It will be easier to apply both brakes in a quick stop if you have already developed this habit.

When riding, sit so that you can use your arms to control the motorcycle rather than to hold yourself up. Your arms should be slightly bent when you hold the handgrips. To help maintain your balance, keep your knees against the gas tank and your feet firmly on the footrests.

To stop quickly, apply both brakes at the same time. Apply the brakes firmly and do not panic if the brakes lock.

To increase your chances of being seen at an intersection, leave your headlight turned on and ride in a lane position that most easily allows oncoming traffic to see you. Maintain a space cushion that allows you to take evasive action if necessary. Never assume that another driver sees you, even if you make eye contact with the driver.

Avoid riding directly alongside another vehicle, since this may place you in the vehicle's blind spot. If the driver can't see you, they may enter your lane without warning. Riding alongside a vehicle is also dangerous because the vehicle will block your route of escape if a hazard arises.