Washington MOTORCYCLE DMV Practice Test 14

Because you need adequate traction to swerve safely, you should not brake and swerve at the same time. Instead, if you approach a hazard that requires you to brake and swerve, you should perform one action and then the other.

Most motorcycle crashes happen on short trips that are less than five miles long at speeds slower than 30 miles per hour.

Successful motorcyclists know that they are safest when they are clearly seen by other road users. Use your headlight, brake light, signals, and lane position to maximize your visibility.

It is a good idea to sound your horn before riding past a vehicle or pedestrian that may move into your lane. If you see a driver in an adjacent lane driving too closely to the vehicle ahead of them, you may assume that they want to pass and may cut in front of you to do so. If you see a person in the driver's seat of a parked car, or if you see a pedestrian or bicyclist in the street, it is a good idea to sound your horn as you pass.

You should use your low beam headlight when riding in foggy conditions. Do not use your high beams when riding near other vehicles.

There is no lane position that is always best and no lane position that should always be avoided. Select a lane position that is appropriate for riding conditions.

When being passed, you should not ride on the side of your lane that is farthest from the passing vehicle. Doing so may tempt the driver to return to your lane before there is actually room for them to do so safely.

A flat front tire is especially dangerous because it affects your ability to steer. If your front tire goes flat while you are riding, safely exit the road as quickly as possible.

Before setting off on any ride, you should do a thorough check of your motorcycle. Inspect the tires, oil and fluid levels, headlight, tail light, turn signals, brake light, clutch and throttle, mirrors, brakes, and horn.

Maintaining an adequate following distance ensures that you will have enough space to stop or swerve out of the way if the vehicle ahead of you stops suddenly. A space cushion also provides you with a better view of any hazards on the road surface, such as potholes.

Brightly-colored and/or reflective clothing will increase your chances of being seen under any conditions. Remember that most motorcycle crashes happen in broad daylight so it is still best to wear bright clothing during the day.

If you must stop quickly while in a curve, you should first straighten and square the handlebars, then stop. If straightening your motorcycle is not possible, you should apply the brakes smoothly and gradually, reduce your lean angle, then increase the brake pressure as you slow down.

Your motorcycle will sit lower than normal under the additional weight of a passenger. To accommodate, you should ride a bit more slowly than usual, particularly when riding through curves, through corners, or over bumps. The extra weight also means that your motorcycle will take longer than usual to speed up, slow down, or stop, so you should maintain a larger space cushion when carrying a passenger.

Motorcycles have blind spots, just like any other vehicle. Always turn your head to check your blind spot before changing lanes. Head checks should be a regular part of your scanning routine.

To help reduce your reaction time, you should cover the clutch and brakes. This is especially helpful when riding through areas where potential hazards are likely.

A plastic, shatter-resistant face shield can help protect your whole face if you are involved in a crash. Goggles protect your eyes, but not the rest of your face. A windshield is not an adequate substitute for googles or a face shield.

Perform an inspection of your motorcycle before every ride. This takes only a few minutes and helps prevent dangerous situations before entering traffic.

While some people believe that a helmet will limit their vision, this is not the case. Any U.S. Department of Transportation-approved helmet will allow the wearer to see as far as is needed for safe riding.

To help keep the operator focused on riding, passengers should avoid unnecessary conversation or movement. Passengers should get on a motorcycle only after the engine has been started. They should sit as far forward as they can without crowding the operator and hold firmly onto the operator's waist, hips, or belt.

When riding, wear boots or shoes that are high and sturdy enough to cover and support your ankles. Heels should be short so they don't catch on rough surfaces. Laces should be tucked in so they can't catch onto the moving parts of the motorcycle.

A plastic, shatter-resistant face shield provides protection for the wearer's entire face in the event of a crash. Goggles may protect someone's eyes, but not the rest of their face. A windshield is not an adequate substitute for either.

Placing a load too high on a motorcycle will raise the motorcycle's center of gravity and risk upsetting its balance.

If you over-apply your brakes, you may lose traction on one or both wheels and crash.

Motorcycle headlights are generally smaller and less powerful than those of cars.

A number of surfaces can provide poor traction for tires. Wet pavement; roads covered in loose gravel or sand; muddy, snowy, or icy areas; painted lane markings; and metal covers and plates in the road can be more hazardous for a motorcyclist than dry pavement.