Washington MOTORCYCLE DMV Practice Test 6

A properly chosen lane position should provide a number of benefits, including an increased ability to see others and to be seen. It should help you avoid wind blasts, other drivers' blind spots, and surface hazards. Your lane position should discourage other drivers from trying to share your lane and provide you with an escape route, should a hazard arise. Choose a lane position that maximizes your space cushion.

It is dangerous to ride directly alongside a vehicle in another lane because you may be in the vehicle's blind spot and the driver will have no way of knowing you are there. It can also be dangerous because the vehicle may block your path of escape if another hazard arises.

When riding, it is safest for a motorcyclist to wear a helmet, eye protection, a jacket, long pants, sturdy boots, and gloves.

A motorcycle has blind spots just like any other vehicle. A rider must always turn their head to check for traffic before changing lanes.

A flat front tire is especially dangerous because it affects your ability to steer. If your front tire goes flat while you are riding, safely exit the road as quickly as possible.

The three major factors that impact a person's blood alcohol content are the amount of alcohol they have consumed, how quickly they have consumed it, and their body weight. The person's sex, physical condition, and food intake may also have some effect.

A person who is age 21 or older with a blood alcohol concentration (BAC) of 0.08 percent or higher is considered legally intoxicated. It is illegal and dangerous to operate any motor vehicle while intoxicated.

A number of surfaces can provide poor traction for tires. Wet pavement; roads covered in loose gravel or sand; muddy, snowy, or icy areas; and painted lane markings can be more hazardous for a motorcyclist than dry pavement.

Oily drippings from cars collect in a strip in the center of a traffic lane. Unless the road is wet, this area will generally still provide enough traction for motorcyclists to ride safely. Because the strip is usually no more than two feet wide, it is often possible to ride to one side of the strip and still be in the center portion of the lane.

The added weight of a passenger in a sidecar will affect the handling of your motorcycle. Expect your motorcycle to require extra space to come to a complete stop.

Make sure that you are aware of the locations of all your motorcycle's controls before beginning to ride. The horn button on a motorcycle is usually located next to the left handgrip.

When riding, keep your knees against the gas tank to help maintain your balance in turns. Sit so that you can use your arms to steer rather than to prop yourself up. Sit far enough forward that your arms are slightly bent when you hold the handgrips, and keep your feet firmly on the footrests.

Riding next to parked cars presents a number of potential dangers. A driver might pull out of parking space and into your path without looking. Car doors may be opened into your lane and pedestrians may step out from between cars.

In potential high-risk areas, such as near intersections, shopping areas, school zones, and construction zones, cover the clutch and both brakes to reduce the time you will need to react to potential hazards.

Most motorcycle crashes occur in broad daylight. Increasing your visibility by wearing bright colors and reflective materials is a good idea at all times.

Before riding, you should check the pressure and condition of your tires; check the oil and fluid levels; and make sure that the low beam headlight, high beam headlight, taillight, signal lights, and brake light all work properly.

When approaching a blind intersection, move into the part of the lane that will bring you into an oncoming driver's field of vision at the earliest possible moment. For example, when approaching a blind corner to your right, you may be seen sooner if you are in the left portion of your lane and not in the center portion.

The single most effective action you can take to improve your chances of surviving a crash is to wear a high-quality helmet that is securely fastened.

When doing a pre-ride inspection of your motorcycle, you should check the air pressure, general wear, and tread of your tires.

On average, a person's body can eliminate the alcohol content of about one drink per hour. The amount of time required to lower a person's blood alcohol content (BAC) can vary, so it is safest not to operate a motor vehicle after consuming any amount of alcohol.

The center of a lane can be especially hazardous when wet. When it begins to rain, avoid the center of the road by riding in the tire tracks left by cars. The left tire track is often the best option.

You should avoid riding if you are tired. When making a long trip, take rest breaks at least every two hours to reduce the risk of becoming fatigued.

To prevent any dangerous situations caused by technical issues, you should perform a thorough inspection of your motorcycle before every ride. Compared to a car, small technical problems can have more serious consequences on a motorcycle.

When being passed, the center portion of the lane is generally the safest lane position for a motorcyclist. Riding on the side nearest the passing vehicle increases the risk of colliding with it. Riding on the side farthest from the passing vehicle can also be dangerous because it may prompt the driver to return to your lane before it is safe to do so.

There are several strategies you can use to prevent someone from driving while under the influence of alcohol. You can arrange another way for them to get home, involve them in other activities to slow their pace of drinking, use any available excuse to stop them from leaving before they are sober, and get other friends involved to intervene as a group.