North Carolina MOTORCYCLE DMV Practice Test 7

It is recommended that you thoroughly check your motorcycle before every ride. Doing this can help you identify mechanical defects or equipment failures that could endanger you.

When riding behind a car, you should position yourself so you can be seen in the other driver's rearview mirror. Riding in the center portion of the lane will generally ensure that you will appear in the middle of their rearview mirror, where the driver is most likely to notice you.

Instead of mechanical turn signals, operators may use hand signals to indicate turns or stops. If an operator's left arm is bent at the elbow and pointing upward, it means the operator plans to turn right or change lanes to the right.

For your protection, you should always wear a long-sleeved jacket made of appropriate material when riding. This is true even in warm weather because wearing a jacket is important to help prevent dehydration. You should also always wear long pants, and tuck in the laces of your footwear to prevent them from catching on the motorcycle.

If your motorcycle fits you properly, your feet should be able to reach the ground while you are seated. When riding your motorcycle, keep your feet firmly on the footrests.

Intersections can be dangerous because they present the greatest degree of potential conflict between motorcyclists and other drivers.

When being passed, it is generally safest to ride in the center portion of your lane. Riding on the side nearest the passing vehicle increases the risk of colliding with them. Riding on the side farthest from the passing vehicle is also dangerous, as it could tempt the driver to re-enter your lane before it is safe to do so.

To be adequately protected while riding, you should wear a jacket and pants that completely cover your arms and legs.

To get maximum protection, use a motorcycle helmet that meets U.S. Department of Transportation (DOT) standards.

In South Carolina, passengers under the age of 21 must wear a helmet and eye protection, though it is recommended that all motorcycle riders wear helmets and eye protection. Passengers should avoid wearing loose clothing that might catch on the motorcycle and should always lean with the operator when turning. Passengers should never be allowed to ride sidesaddle.

Motorcyclists will seldom hear their tire go flat. Tire failure is more commonly indicated by a sudden change in handling.

Develop the habit of using both brakes every time you slow or stop. If you need to stop quickly, it is best to apply both brakes. It will be easier to apply both brakes in a quick stop if you have already developed this habit.

A two-second following distance is generally appropriate. Allow a larger cushion of space when riding under conditions that will increase your stopping distance, such as when the road surface is icy or wet.

To reduce the risk of being involved in a crash, you should always ensure that you are visible to others. Communicate your intentions through proper use of your signals, brake light, and lane position. Maintain a space cushion around your motorcycle and consistently scan the road ahead of, behind, and next to your vehicle.

Gloves designed for motorcycle riding are usually made of leather. In addition to improving your grip, gloves provide protection for a rider's hands and fingers.

No single lane position is always best and no single lane position should always be avoided. Adjust your lane position as road and traffic conditions change, choosing a position that will maximize your space cushion and allow other drivers to see you more easily.

There is no lane position that is always best and no lane position that should always be avoided. Select a lane position that is appropriate for riding conditions.

Signals are an important part of communication when riding in groups. When the lead rider's right leg is extended, it means there is a hazard in the roadway on their right side.

Because tires have less traction when a motorcycle is leaning than when it is upright, always try to position your motorcycle in an upright position before braking. If you must brake while in a curve, apply the brakes more smoothly and gradually than if your motorcycle was traveling on a straightaway.

Oily drippings from cars and trucks build up in the center of each lane. Unless the road is wet, this strip usually still provides enough traction more a motorcycle to operate safely. The strip is generally narrow enough that you can ride to either side of it and still be in the center portion of the lane.

Long-term exposure to wind noise while riding can cause hearing damage, even if you wear a helmet. Use of proper hearing protection is recommended to prevent damage.

If your drive chain or belt fails, you will experience an immediate loss of power to the rear wheel.

When riding at night, use your high beam (unless you are following or meeting another car), take advantage of the headlights of other vehicles, and wear reflective materials to increase your visibility. You should always be flexible about your lane position, selecting whichever position will help you to see, be seen, and have an adequate space cushion.

The weaving motion that occurs when a motorcycle rides over rain grooves or bridge gratings is generally not dangerous. If you experience weaving when riding over one of these surfaces, simply relax and proceed straight across the grooves or gratings at a steady speed. Trying to compensate for the weaving motion by zigzagging is more dangerous than riding straight.

In a group, less experienced riders should ride toward the front, just behind the leader, so more experienced riders can easily watch them.