Wisconsin CDL DMV Endorsement Hazmat 1

Shippers must place diamond-shaped hazard warning labels on most packages of hazardous materials. If the label won't fit on the package, it can be placed on a tag that is securely attached to the package.

If transporting any amount of chlorine, a driver must always stop at a railroad crossing 15 to 50 feet from the nearest track.

In the event of a leak in a cargo of hazardous materials, do not continue to drive any longer than is necessary for safety. Continuing to drive would result in a larger area becoming contaminated. Instead, park the vehicle, secure the area, stay with the vehicle, and send someone to get help.

In general, a shipper is required to list an emergency response telephone number on hazardous materials' shipping papers. There are some exceptions to this rule.

Fighting a hazardous materials fire requires specialized training and equipment. Unless you possess these yourself, it is best to let emergency personnel deal with the fire.

A vehicle with tanks that are used to transport hazardous materials must always be stopped before being driven over railroad tracks, even if the tanks are empty.

Except when parking briefly to perform necessary functions for vehicle operation (such as refueling), never park a vehicle carrying Division 1.1, 1.2, or 1.3 explosives within 300 feet of a bridge, tunnel, or building. Never park such a vehicle within five feet of the traveled portion of a road. Such vehicles should be parked only briefly.

The person in charge of loading or unloading a hazardous materials cargo tank must ensure that a qualified person is always supervising the process. The supervisor must be alert; have a clear view of the tank; be within 25 feet of the tank; know the hazards of the involved materials; know the procedures to follow in the case of an emergency; and be authorized to and capable of moving the tank.

Packages that contain liquid containers must have orientation markers. Arrows displayed on the box should be pointing in the correct upright direction.

If you discover a leak in a cargo of hazardous materials, identify the materials in question by using the shipping papers, labels, or package location. Do not touch the leaking material.

The National Response Center must be notified of any incident that results in death; hospitalization; $50,000 or more in estimated property damage; an evacuation of the general public or closure of a major transportation route/facility for more then one hour; fire, breakage, spillage, or suspected contamination involving radiation, bacteria, or toxins. Additionally, if the carrier judges the situation to be so serious that it should be reported, it should be reported.

When marking hazardous materials in an "HM" column on a shipping paper, the letters "RQ" may be used instead of an "X" if a reportable quantity of the material must be identified.

If the words "Inhalation Hazard" appear on the shipping paper or package, you must display the "Poison Inhalation Hazard" or "Poison Gas" placards, as appropriate.

When carrying Division 1.1, 1.2, or 1.3 explosives, you should not park within 300 feet of a bridge, tunnel, or building, unless you are parking for a short period of time while performing an operational necessity, like refueling.

If a driver stops and exits their vehicle, the hazardous materials shipping papers must be left on the driver's seat.

Column 2 of the Hazardous Materials Table lists the proper shipping names and descriptions of regulated materials.

The power unit of a placarded vehicle must be equipped with a fire extinguisher with an Underwriters Laboratories (UL) rating of 10 B:C or more.

Before loading or unloading a tank with flammable liquids, you should turn off the engine, unless running the engine is necessary to operate a pump. Ground the tank before opening the filling hole and maintain the ground until after closing the filling hole.

Flammable gases are assigned to hazardous materials Class 2.

If the letter “G,” for "Generic," is written in Column 1 of a shipping paper, the technical name of the associated hazardous material must also be listed.

Shippers of certain kinds of hazardous materials are required to display diamond-shaped warning signs, known as placards, on any transporting vehicles. Shippers are required to provide applicable placards, labels, shipping papers, and emergency response information.

When loading hazardous materials, do not use hooks or tools that could damage containers or other packaging.

Hazardous materials warning placards are usually diamond-shaped.

While the manual includes all of the information required to pass the hazardous materials knowledge test, you should consider reading the manual as only the first step to learning about the topic. You can learn more by reading and understanding the federal and state rules about the transportation of hazardous materials, as well as by attending hazardous materials training courses.

One clue that a shipment may contain hazardous materials is that the shipper is in a line of business that involves such materials. Examples include paint dealers; chemical suppliers; scientific supply houses; pest control businesses; agricultural supply firms; and dealers in explosives, munitions, or fireworks.

To determine which placards need to be used, you must know the hazard class of the materials being shipped, the amount of hazardous materials being shipped, and the total weight of all hazardous materials in your vehicle.

When carrying Division 1.1, 1.2, or 1.3 explosives, do not park within 300 feet of a bridge, tunnel, or building; a place where people gather; or an open fire.

The use of cargo heaters is not always permitted. When transporting materials that are categorized as Class 1 (Explosives), Class 2.1 (Flammable Gases), or Class 3 (Flammable Liquids), the use of heaters in the same space is generally prohibited.

Cylinders and drums are often used to contain hazardous materials. Be sure to take the proper precautions if transporting a cargo of hazardous materials.

The loading and unloading of a tank must be watched by a qualified person. They must be alert; have a clear view of the tank; stay within 25 feet of the tank; know the hazards of the materials involved; know the procedures to follow in an emergency; and be authorized and able to move the tank if necessary.