Over 95% pass rate when practice at DMV Practice Test

Wisconsin CDL DMV Endorsement Bus 1

Take 10 practice tests for CDL is the best way to prepare for your Wisconsin DMV exam is by taking our free practice tests. The following question are from real Wisconsin DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
Number of Question
Passing score
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. If your vehicle's ABS is malfunctioning:
You will not have any working brakes.
You will still have brakes.
You should only use the parking brake.

Anti-lock brakes are meant to keep a vehicle's wheels from locking up during hard applications. If your vehicle's Anti-Lock Braking System (ABS) malfunctions, its standard braking functions should still be in place. You should continue to drive and brake in a normal manner.

2. Properly adjusted outside convex mirrors should allow the driver to see:
Where the front of each rear tire touches the ground.
Where the front of each front tire touches the ground.
The top of the bus.
The muffler.

On a school bus, outside convex mirrors should be adjusted to allow the driver to see at least one traffic lane on either side of the bus; the entire side of the bus up to the mirror mounts; and where the front of each rear tire touches the ground.

3. As students exit a school bus, the driver should watch to ensure that they:
Are leaving in pairs.
Do not get caught on the handrail or door.
Do not talk while exiting.

It is possible for students to be injured, or even killed, as a result of their clothing, accessories, or bodies getting caught on a handrail or door while exiting a school bus. The driver should closely watch students as they exit to ensure that they have all unloaded the bus successfully and have reached a safe location.

4. The overhead rearview mirror is located:
On the right side of a bus.
On the steering wheel of a bus.
Above the windshield inside a bus.

On a school bus, the overhead inside rearview mirror is mounted directly above the windshield on the driver’s side of the bus. This mirror should be used to monitor students inside the bus.

5. As a general rule, student safety is best maintained by:
Keeping students on the bus.
Letting some students evacuate the bus.
Letting students evacuate the bus and scatter.

In most emergency or crisis situations, students will be safest and easiest to keep under control if they remain on the school bus. Generally, students should be kept on the bus as long as it does not expose them to unnecessary risks or injury.

6. When stopping to pick up students, be sure to park at least 10 feet away from the students because:
You will have a good view of their movements.
It will be difficult to get any closer to the students.
Students should walk for exercise.

When picking up passengers, a school bus driver should park with the vehicle's front bumper at least 10 feet away from the students. This is the safest parking option because it forces the students to walk to the bus, making it possible for the driver to watch their movements.

7. If a school bus stalls on a railroad track:
Students should remain on the bus.
Students should be evacuated to a location near the bus.
Students should be evacuated and moved away from the bus.

If a school bus becomes stalled or trapped on railroad tracks, the driver should immediately evacuate everyone from the bus. If the bus is struck by a train, to avoid any flying debris, the students should be led far away from the bus at an angle that is in the direction of any oncoming train.

8. Before evacuating a bus in response to a hazard, a driver should:
Ask the students if they want to leave.
Explain the situation to the dispatcher.
Take their time deciding if an evacuation is necessary.

If time permits, before deciding to evacuate a school bus, the driver should contact their dispatcher to explain the situation. The decision to evacuate must be a timely one.

9. After students unload at a school, the driver:
May assume students have taken all of their belongings with them.
Should assume the students have immediately cleared the doorway.
Should walk through the bus and check for any sleeping or hiding students.
May turn off the dispatch radio.

After students have exited a bus at a school, the driver should walk through the bus to check for any remaining students who are hiding or sleeping. Drivers should also look out for items that students may have left behind.

10. ABS allows you to:
Drive faster.
Drive less carefully.
Maintain control under slippery conditions.

Anti-Lock Braking Systems (ABS) help prevent brake lockup when driving on slippery surfaces. If a driver brakes too hard on a slippery surface, ABS makes it easier for the driver to maintain control of their vehicle. A vehicle equipped with ABS should be driven and braked in the same way as a vehicle without ABS.

11. Before leaving a bus stop, a driver should:
Make sure no students are running to catch the bus.
Make sure students have placed their backpacks in the aisle.
Make sure students have opened the emergency vent.
Make sure students are facing the rear of the bus.

Before pulling away from a bus stop, a driver should make sure that there are no students running to catch the bus.

12. School buses:
Are never equipped with ABS.
Are only equipped with ABS if students who are younger than 10 years of age will be on the bus.
May be equipped with ABS.

In general, school buses manufactured after 1998 or 1999 must be equipped with an Anti-Lock Braking System (ABS). Many older buses are equipped with ABS as well.

13. The overhead inside rearview mirror should be positioned to show:
The rear tires.
All of the students on the bus.
The floor of the bus.

The top portion of the overhead inside rearview mirror should be positioned to display the top of the bus's rear window. This mirror positioning should allow the driver to see all of the students on the bus, including the heads of the students sitting immediately behind the driver.

14. When dropping off students at a school, a driver should:
Secure the bus by turning off the engine.
Leave the key in the ignition, if leaving the driver’s compartment.
Read a book while students unload.

When unloading students at a school, a bus driver must secure the bus by turning off the engine. If they must leave the driver's compartment, they should remove the key from the ignition. The driver must supervise the unloading process.

15. Bus stops may be changed by:
The driver.
The school district.

Official school bus routes and stops are established by the local school district. Drivers should never change a stop location without the written approval of an appropriate district official.

16. If a student drops an item near a stopped bus, they should:
Hurry and pick up the item.
Leave the item behind.
Ask the driver to pick up the object.
Have another student pick it up.

It is dangerous for students to retrieve dropped items because doing so could cause them to disappear from the driver's view at a crucial moment. If an item is dropped, the student should get out of the bus's danger zones, get the attention of the driver, and ask the driver to retrieve the item.

17. If a tornado is approaching and there is no nearby shelter, where should students go?
To a nearby ditch
To the closest tree
Near a river

If students are evacuated due to a school bus being in the direct path of a sighted tornado, the driver should lead them to shelter in a nearby building. If no such shelter is available, the driver should escort them to a nearby ditch or culvert. They should avoid areas that may be subject to flash flooding and should be far enough away from the bus that it would not fall on them if it tipped over.

18. If there is a fire on a school bus, the students:
Must be evacuated.
Should stay on the bus but be moved to a part of the bus unaffected by the fire.
Should stay in their seats.

If a school bus is on fire, or if there is a threat of fire, it is mandatory for a bus driver to evacuate the students from the bus.

19. When making a stop to pick up students, a driver should ensure all surrounding traffic has stopped before:
Opening the door and signaling for the students to approach.
Turning on the alternating red lights.
Pulling over to the side of the road.

When stopping to pick up students, a school bus driver should ensure that all surrounding traffic has stopped before opening the door and signaling for the students to approach the bus.

20. When approaching a school bus stop, the driver should:
Honk the horn.
Drive slowly.
Talk to students on the bus.

A school bus driver should always approach bus stops slowly and cautiously.

Your Progress
  • 0Incorrect (4 allowed to pass)
  • 0Correct