Washington CAR DMV Practice Test 6
Take 24 practice tests for CAR is the best way to prepare for your Washington DMV exam is by taking our free practice tests. The following question are from real Washington DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
Flashing red lights are used at dangerous intersections. Treat them like stop signs.
If your brakes stop working, pump the brake pedal several times. This will often build up enough brake pressure to allow you to stop.
This sign indicates that a T intersection is ahead.
This sign provides advance warning that bicycles may be present.
By law, your vehicle’s headlights must be turned on from a half hour after sunset until a half hour before sunrise.
Using a cell phone (including a hands-free phone) or any kind of audio device (including a radio or CD player) can be a dangerous distraction and contributes to the risk of a crash.
A speed limit is the maximum or minimum legal speed you can travel on a road under ideal conditions. You may drive more slowly than the posted speed, but it is illegal to drive any faster. You must drive more slowly where signs or signs indicate a school zone or work zone speed limit. If conditions such as road construction or bad weather make the posted speed unsafe, drive under the speed limit.
Safety belts can double your chance of surviving a crash and more than double your chance of avoiding serious injury. Airbags, when used properly with safety belts, provide additional protection in a front-end crash. You should wear both shoulder and lap belts.
As an increasing number of drivers populate the roadways, road rage becomes more prevalent. To help prevent road rage, a driver should use proper turn signals, obey posted speed limits, and allow plenty of travel time.
It is prohibited to park on the shoulder of a freeway, except in an emergency.
This one-way sign indicates that traffic flows only in the direction of the arrow.
If the weather changes suddenly, you will need to adjust your driving to adapt. Always slow down when driving in rainy or foggy conditions. Be especially aware of vehicles behind you that may be going too fast for conditions.
When approaching a stopped school bus that is using its stop signal, a driver is required to come to a complete stop. They should not proceed until the stop arm is withdrawn.
A solid yellow line next to your lane means that passing is not permitted from your direction.
Reducing your speed should be your first response to decreased visibility and dangerous road conditions.
A sign with a red circle and slash over a symbol indicates that the action represented by the symbol (in this example, a right turn) is not allowed.
If you experience a tire blowout, take your foot off the gas pedal and do not immediately apply the brakes. Gradually slow down before gently applying the brakes and pulling off the side of the road.
Before backing up, you should turn to look directly through the rear window to check for hazards. Do not rely only on your mirrors. You should look left and right and yield to any vehicles, bicyclists, or pedestrians.
Construction and maintenance signs are orange-colored and are used to notify drivers of unusual or potentially dangerous conditions in or near work areas. This sign warns drivers that they are approaching a construction zone and that they should prepare to lower their speed and drive with extraordinary caution.
When approaching an unmarked railroad crossing, slow down and be prepared to stop. Before you cross, be sure that no trains are approaching from either direction on any track. If you see or hear a train coming, stop at a safe distance from the nearest track and wait to proceed until after the train passes.
Highway work zones are established according to the type of work underway along the roadway. Signs in work areas are typically diamond-shaped, orange, have black letters or symbols, and serve as a warning that people are working on or near the highway.
Work area signs are generally orange with black lettering or symbols. Detour signs provide drivers with an alternate route to avoid a roadway that is entirely blocked by construction.
When approaching an intersection with a solid yellow traffic light, slow to a stop before entering the intersection, if it is safe to do so. If you can't stop safely, drive carefully through the intersection.
Being fatigued while driving is similar in danger to driving under the influence of alcohol. If you begin to feel tired while driving, the best thing to do is to stop driving.
Some regulatory signs prohibit certain actions. These signs are rectangular and white with red and black markings. A red circle and slash on top of a black symbol indicates that the specified action is forbidden.
Try more CAR Washington Practice Test
- Practice test 1
- Practice test 2
- Practice test 3
- Practice test 4
- Practice test 5
- Practice test 6
- Practice test 7
- Practice test 8
- Practice test 9
- Practice test 10
- Practice test 11
- Practice test 12
- Practice test 13
- Practice test 14
- Practice test 15
- Practice test 16
- Practice test 17
- Practice test 18
- Practice test 19
- Practice test 20
- Practice test 21
- Practice test 22
- Practice test 23
- Practice test 24
- 0Incorrect (5 allowed to pass)
- 0Correct