Illinois CAR DMV Practice Test 1
Take 16 practice tests for CAR is the best way to prepare for your Illinois DMV exam is by taking our free practice tests. The following question are from real Illinois DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
Drivers must respect and cooperate with all other road users and conform to specific rules in order to maintain order and to avoid crashes. When encountering an aggressive driver, it is safest to just get out of their way. Always avoid competing with other drivers.

Warning signs are usually yellow with black markings. This sign warns that the divided highway ends ahead. Prepare to change lanes or shift lane position.

Warning signs are usually yellow with black markings. This sign warns drivers that the upcoming road will curve right, followed by a curve to the left. Drivers should adjust their speed to safely continue on the road.
When turning left at an intersection, yield the right-of-way to oncoming traffic and pedestrians. Once the intersection is clear and applicable signals allow, you may complete the turn.
A "Merging lanes" sign indicates that two lanes of traffic going the same direction will soon merge into one lane. Drivers should be ready to either change lanes or allow other traffic to merge into their lane.

When approaching this sign, you must yield the right-of-way. Slow down and let vehicles and pedestrians crossing your path pass before you proceed. If necessary, stop before going ahead.
Before changing lanes, it is very important to check behind you. You should look over your shoulder to ensure that you are not getting in the way of vehicles in the lane you want to enter. Before changing lanes, you should also ensure that no drivers are attempting to drive into the same spot from a different lane.

A five-sided yellow or yellow-green sign alerts drivers to either a school zone or school crossing.

This sign is displayed on slow-moving vehicles.
When entering and driving through a work zone, slow down and be prepared to stop. Obey posted speed limits and be alert to conditions around you. Workers could be present.

Warning signs are usually yellow with black markings. These signs alert drivers to areas where bicycles may be crossing.
On the freeway, be ready for changes in traffic conditions. Watch for signals from other drivers. Expect merging vehicles at on-ramps and interchanges and be prepared for rapid changes in road conditions and traffic flow.
When a vehicle makes a turn, the rear wheels follow a shorter path than the front wheels. The longer the vehicle, the bigger the difference between the paths of the front and rear wheels. Therefore, long trucks often have to swing wide to complete a right turn.
At a stop sign, you must come to a complete stop at the stop line, if there is one. If there is no stop line, you must make a complete stop before entering the crosswalk. If there is no crosswalk, you must stop before entering the intersection.

A downward-facing triangular sign is always a yield sign. Drivers must be prepared to slow down or stop when approaching a yield sign.
When merging onto a freeway, you should enter at or near the speed of traffic.
If driver making a left turn enters an intersection while the light is green, they may finish the turn even after the light turns red.

The stop sign is the only eight-sided sign you will see on any roadway. When you encounter a stop sign, you must come to a complete stop. You may not proceed until the way is clear for you to completely and safely pass through the intersection.
When traffic control signals are not working, a driver must always treat the intersection as an all-way stop and come to a complete stop, unless otherwise directed by law enforcement. The driver must then look and yield the right-of-way before entering the intersection.
Using a phone while driving is a distraction that increases your risk of being involved in a crash.
A driver must yield to a pedestrian when a pedestrian is in an unmarked crosswalk on the driver’s side of the roadway and there are no traffic control signals.
Before merging into interstate traffic, you should identify a gap, accelerate to the speed of traffic, and signal. Merge into the gap when it is safe to do so. Be alert to other traffic and do not expect other drivers to clear the lane.

Warning signs are usually yellow with black markings. This sign indicates that there is a steep hill ahead. Slow down and be ready to shift to a lower gear to control your speed and protect your brakes from damage.

Orange-colored signs indicate construction areas. Proceed with caution.

A round yellow sign indicates that there is a railroad crossing ahead.
Blind or partially blind pedestrians may carry a white cane or use the assistance of a guide dog. You must always yield the right-of-way to a pedestrian who is using a guide dog or carrying a white cane.
It is illegal for anyone to operate a motor vehicle on Illinois highways with any trace of a controlled drug, substance, or intoxicating compound in the blood. Drivers under age 21 will have their driving privileges suspended for three months if they are found to have had any trace of alcohol in their system after being stopped and issued a citation for a traffic violation.
Large trucks take longer to stop than other vehicles traveling at the same speed. The average passenger vehicle traveling at 55 mph can stop within 400 feet. However, a large truck traveling at the same speed can take almost 800 feet to stop.
When driving too quickly in wet conditions, your tires may lose all contact with the road surface. Loss of traction will cause the vehicle to ride on top of the water, which is called "hydroplaning." The best way to prevent this from happening is to drive more slowly in rainy or wet conditions than you would when driving during ideal weather conditions.

This sign informs drivers that they are leaving a divided roadway and approaching a two-way highway.

An octagonal sign always means stop. When approaching a stop sign, you must come to a complete stop at the marked stop line and proceed only when it is safe to do so. If there is no stop line, stop before the crosswalk. If there is no crosswalk, stop before the intersection at a point from which you can see any oncoming traffic.

This sign indicates that there is a pedestrian crosswalk.
Both hands should be placed on opposite sides of the steering wheel. This position is comfortable and promotes safe turning on high-speed roadways.

This sign marks a one-way road, entrance, or exit. If you are facing this sign, traffic is coming toward you. Turn around if you are driving toward this sign.
When it is difficult to see due to darkness or poor weather, increase your following distance. This will give you more time to react to hazards that you may not see in advance.
- 0Incorrect (7 allowed to pass)
- 0Correct