Over 95% pass rate when practice at DMV Practice Test

North Carolina CAR DMV Practice Test 3

Take 22 practice tests for CAR is the best way to prepare for your North Carolina DMV exam is by taking our free practice tests. The following question are from real North Carolina DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
22
Number of Question
37
Passing score
29.6
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. A speed limit is:
The maximum or minimum legal speed you can travel on a road under dangerous conditions.
The maximum or minimum legal speed you can travel on a road under ideal conditions.
The suggested speed to travel on a road under ideal conditions.
None of the above.

A speed limit is the maximum or minimum legal speed you can travel on a road under ideal conditions. You may drive more slowly than the posted speed, but it is illegal to drive any faster. You must drive more slowly where signs or signs indicate a school zone or work zone speed limit. If conditions such as road construction or bad weather make the posted speed unsafe, drive under the speed limit.

2. A stop sign is shaped like a(n):
Rectangle.
Square.
Circle.
Octagon.

An octagonal shape is used only for stop signs. All eight-sided signs tell drivers to come to a complete stop before proceeding.

3. This sign means:
/data/image/dmv_image/car/hawaii-no_righit_turn.png
No right turns.
Right turns are permitted.
Stop before turning right.
Sharp curve ahead.

A regulatory sign displaying a red circle with a red slash through the middle indicates that a specific action is prohibited. Right turns are not permitted where this sign is posted.

4. Always signal when:
Changing lanes.
Pulling into or out of a parking space.
Pulling into traffic from an alley or parking area.
All of the above.

Always use the proper turn signal when changing lanes, pulling into or out of a parking space, or pulling into traffic from an alley or parking area. Communicate with other drivers on the road to help prevent accidents.

5. A driver license is required for which of the following?
    I. Sitting in the driver's seat of a car while the engine is running.
    II Steering a car while it is being pushed or towed by another vehicle.
I only
II only
Both I & II
Neither I nor II

If you do not have a valid driver license, it is illegal to sit in the driver's seat of a motor vehicle while the engine is running or to steer a motor vehicle while it is being pushed or towed by another vehicle.

6. Before turning, you should:
Use your signal.
Turn the wheel.
Increase your speed.
Change lanes.

To complete a turn safely, you should activate your turn signal three to four seconds before your turn.

7. When driving at speeds of 45 mph or faster, you should signal to turn ____ before beginning the turn.
20 feet
50 feet
100 feet
200 feet

When you wish to change lanes or make a turn, signal to inform other motorists of your intentions. Signals should be activated at least 200 feet before you make the turn when you are driving at speeds faster than 45 mph. Continue signaling until you have completed the turn or lane change.

8. When passing an emergency vehicle stopped on the side of the road, drivers should:
Increase their speed.
Vacate the lane closest to the emergency vehicle or slow down.
Ask the emergency worker if they need help.
Move to the lane closest to the stationary vehicle.

If you are driving past an emergency vehicle parked on the side of the road, you must vacate the lane closest to the stationary emergency vehicle. If you cannot move over safely, you must slow down.

9. You experience an incident at work that has left you feeling angry. When you get to your car, you should:
Play the radio loudly so you won’t think about it.
Drive fast on the interstate to let off steam.
Take a few minutes to cool off before you begin your drive home.
Stop at your favorite bar and have a few drinks before driving home.

Persons who are upset, angry, or otherwise distracted by their emotions should take time to cool off before driving a car. Taking out frustrations or anger while driving is exercising very poor judgment and is very dangerous to both the driver and others on the road.

10. When driving under icy or snowy conditions, which driving technique will help drivers avoid crashes?
Add extra weight to their vehicles to improve traction.
Get off the highways as quickly as possible.
Engage the four-wheel drive on their vehicles.
Reduce their speed and increase their following distance.

Reduce your speed when roads are snow-covered or icy. Doing this and increasing your following distance are the most important techniques for avoiding crashes under snowy or icy conditions.

11. This road sign means:
/data/image/dmv_image/car/arizona-shap_turn_right.png
The road ahead turns sharply right, then left.
The road ahead turns sharply left, then right.
The road ahead curves to the left.
Construction ahead.

This sign indicates that the road ahead will turn sharply to the right and then to the left.

12. This sign means:
/data/image/dmv_image/car/indiana-merging_traffic.png
Merging traffic.
Multiple turns.
Lane shifting.
Do not block intersection.

Warning signs prepare drivers for upcoming road conditions and hazards and are usually yellow with black markings. This sign alerts drivers to potential traffic merging from the right. Drivers should prepare to allow the traffic to merge safely.

13. This sign means:
/data/image/dmv_image/car/hawaii-slippery_when_wet.png
Slippery when wet.
Watch for drunk drivers.
Dangerous curve ahead.
Bump in the road ahead.

Warning signs are usually diamond-shaped with black markings on a yellow background. They alert drivers to upcoming hazards. This sign warns drivers to be extra careful when the pavement is wet because the road may become slippery, making vehicles more difficult to control.

14. A yellow and black diamond-shaped sign:
/data/image/dmv_image/car/washington-warning.png
Warns you about conditions on or near the road.
Helps direct you to cities and towns ahead.
Tells you about traffic laws and regulations.
Tells you about road construction ahead.

Warning signs, which tell you about conditions on or near the road ahead, are usually diamond-shaped with black symbols or words on a yellow background.

15. When backing up, you should:
Rely only on your mirrors.
Look over your shoulder to the rear window.
Rely only on a backup camera.
Put your head out of the window on the driver's side.

When you back up, turn your head and look back. Don’t rely on the rearview mirror.

16. If your turn signals fail, you should use ____ to indicate that you are turning.
Your horn
Your headlights
Hand signals
Your emergency flashers

If your vehicle's turn signals do not work, you should use hand signals to indicate when you intend to change direction.

17. What can you do to avoid the need to make emergency stops while driving in traffic?
Honk your horn to make others aware of your presence.
Look ahead and maintain a safe following distance.
Drive in the right lane only.
Drive more slowly than the flow of traffic.

Keeping a safe following distance will enable you to react to an upcoming problem without the need for a emergency stop, which could cause a driver behind you to crash into the back of your vehicle.

18. At a four-way stop:
The driver to arrive first has the right-of-way.
The driver to arrive last has the right-of-way.
One driver should continue driving without stopping.
One driver should wave the other drivers ahead.

At four-way stops, traffic from all four directions must stop. The first vehicle to reach the intersection should move forward first. If two vehicles reach the intersection at the same time, the driver on the left yields to the driver on the right.

19. What is the appropriate action to take when approaching a railroad crossing that does not have signals to direct traffic?
Always bring the car to a complete stop.
Slow down and be prepared to stop.
All railroad crossings have signals so you will never encounter this situation.
Increase your speed to get across the tracks quickly.

When approaching an unmarked railroad crossing, slow down and be prepared to stop. Before you cross, be sure that no trains are approaching from either direction on any track. If you see or hear a train coming, stop at a safe distance from the nearest track and wait to proceed until after the train passes.

20. This sign means:
/data/image/dmv_image/car/pennsylvania-divided_highway.png
You must turn left or right.
You are approaching a T intersection.
The road that you are on intersects with a divided highway.
You are on an overpass above a divided highway.

This sign indicates that the road that you are on intersects with a divided highway. A divided highway is two one-way roadways separated by a median or guide rail.

21. This road sign means:
/data/image/dmv_image/car/virginia-no_right_turn.png
No left turn.
No U-turns.
No exit.
No right turn.

This sign indicates that right turns are prohibited.

22. Before changing lanes on a multilane highway, you should:
Sound your horn.
Turn on your headlights.
Reduce your speed.
Check your mirrors and blind spots.

Before changing lanes, you should look in your rearview and side mirrors to make sure no one is trying to pass you. You should also look over your shoulder to make sure that no one is in your blind spot.

23. This sign means:
/data/image/dmv_image/car/washington-slippery_when_wet.png
Watch for drunk drivers.
Curves ahead.
Slippery when wet.
Apply your brakes quickly.

This sign warns that the road is slippery when wet.

24. Roads freeze quickly when they are:
Flat.
Curvy.
In the sun.
Shaded.

In cold or wet weather, you should take special care on sections of road that are shaded by trees or buildings. These areas freeze more quickly than the rest of the road and are the last parts of the road to dry.

25. A vehicle must pass a safety inspection:
Twice a year.
Once a year.
Every six months.
Every six weeks.

Before you can renew your vehicle's registration, it must pass an annual safety inspection. This inspection must occur within 90 days of when you are renewing the vehicle. In several North Carolina counties, an emission inspection is also required.

26. What does a flashing yellow traffic light mean?
Merging traffic
Proceed with caution.
Pedestrian crossing
Come to a full stop.

A flashing yellow traffic light indicates that you should drive with caution.

27. When you hear a fire engine siren behind you, you must:
Slow down until it passes you.
Drive with your flashers on.
Pull over to the side of the road and stop.
Speed up and take the nearest exit.

When you hear the siren of an emergency vehicle, you must pull over to the curb or side of the road and stop.

28. This sign means:
/data/image/dmv_image/car/new-york-yield.png
Slow down if an emergency vehicle is approaching.
Look both ways as you cross the intersection.
Always come to a full stop at the intersection.
Slow down and be prepared to stop if necessary.

Decrease your speed as you approach an intersection with a yield sign. Prepare to stop and yield the right-of-way to vehicles and pedestrians in the intersection or crossroad. You must come to a full stop at a yield sign if traffic conditions require it.

29. A driver entering interstate traffic from an entrance or acceleration ramp:
Should yield to drivers already on the interstate.
Has the right-of-way.
May force their way into traffic.
Can assume that other drivers will change lanes to make room.

If you are on an entrance or acceleration ramp and are entering interstate traffic, you should yield to drivers already on the interstate highway. Merge safely into traffic when you are able to do so.

30. This sign means:
/data/image/dmv_image/car/indiana-lane_ends.png
Lane ends.
No right turn.
Slippery when wet.
Two-way traffic.

Warning signs prepare drivers for upcoming road conditions and hazards and are usually yellow and black. This sign tells drivers that a lane is ending and that they should prepare to allow traffic to merge safely.

31. You are driving in the right lane of a multilane highway and want to move into the left lane. You should:
Look in your rearview mirror for traffic behind you before changing lanes.
Look over your left shoulder for traffic in your blind spot before changing lanes.
Look in your side mirror for traffic and turn on your directional signal.
All of the above.

Before changing lanes, you should always verify that there are no other vehicles in the lane you want to enter by checking your mirrors and looking over your shoulder in the direction you plan to move. You should signal every time you change lanes.

32. This sign means:
/data/image/dmv_image/car/washington-divided_highway_road_ends.png
Curves ahead.
Divided highway starts.
Divided highway ends.
Bumps in the road.

This sign warns drivers that the divided highway ends ahead.

33. When approaching an accident scene, you should:
Keep your attention on your driving.
Keep moving.
Stop if you are involved or if emergency help has not yet arrived.
All of the above.

Do not stop at an accident scene unless you are involved or emergency help has not yet arrived. Keep your attention on your driving and keep moving, watching for people who might be on or near the road. Never drive to the scene of an accident, fire, or other disaster just to look.

34. The driver's left arm and hand are extended upward. This hand signal means that the driver plans to:
/data/image/dmv_image/car/new-york-hand_signal_up.png
Turn left.
Turn right.
Come to a stop.
Go straight ahead.

If a driver's left arm and hand are extended upward, they are indicating that they intend to turn right. Adjust your driving accordingly if following a driver who is using this hand signal.

35. Smoking and preparing to smoke while driving:
Do not affect driving abilities.
Help maintain driver alertness.
Are distracting activities.
Are not distracting activities.

Smoking while driving can create dangerous distractions by causing you to take your hands off the wheel and/or your eyes off the road.

36. The most important thing to remember about speed management and curves is that you must:
Drive at the posted speed limit as you enter the curve, then slow down at the sharpest part of the curve.
Slow down before you enter the curve.
Accelerate gently before you enter the curve.
Drive at the posted speed limit before, throughout, and after the curve.

The most important thing to remember about driving in curves is that your vehicle’s inertia may make it difficult to turn. To maintain control, it is essential that you slow down before entering the curve.

37. A red and white triangular sign at an intersection means:
Slow down if an emergency vehicle is approaching.
Look both ways as you cross the intersection.
Always come to a full stop at the intersection.
Slow down and be prepared to stop if necessary.

A triangular red and white yield sign means that you must decrease speed as you approach an intersection and yield the right-of-way to any vehicles or pedestrians in the intersection. You must be prepared to stop if conditions require it.

Your Progress
  • 0Incorrect (7.4 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37