Connecticut CAR DMV Practice Test 2
Take 24 practice tests for CAR is the best way to prepare for your Connecticut DMV exam is by taking our free practice tests. The following question are from real Connecticut DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
You may not know what is on the other side of a hill or just around a curve, even if you have driven the road many times. If a vehicle is stalled just out of sight on the roadway, you must be able to stop. Whenever you come to a hill or curve, adjust your speed so you can stop if necessary.
If your vehicle begins to skid, release the accelerator or brake pedal to regain vehicle balance. Steer in the direction of the skid to regain control of the vehicle.
Excessive vehicle speed can have disastrous effects. As a vehicle's speed increases, the potential impact of a collision also increases, elevating the possibility of serious injury and death. Increase your following distance as your speed increases to ensure that you will be able to stop safely if needed.
When facing a green light, you must yield to pedestrians and vehicles already in the intersection. Drivers must yield to pedestrians when turning on a steady green signal.
When making a left turn, you must yield to pedestrians, bicyclists, or other vehicles moving on their green light.
If you experience a sudden tire blowout, do not panic. Grasp the steering wheel firmly and take your foot off the accelerator to allow the vehicle to roll to a stop. Lightly apply the breaks when it is safe to do so. Do not move to the shoulder of the road until the car has slowed considerably.
Do not go around or under any lowered gate at a railroad crossing. Once the gate is raised, do not proceed across the tracks until you can see clearly in both directions and are sure there are no trains coming.
A flashing yellow traffic light means drivers must slow down, be more aware, and proceed with caution. Be alert to crossing traffic and pedestrians.
If you approach a stopped school bus that has its lights flashing and arm extended, you must come to a full stop and remain stopped until the signal arm is pulled back and the bus resumes motion. This law applies whether you are traveling in the same direction as the bus or if you are approaching from the opposite side of the street.
Both hands should be placed on opposite sides of the steering wheel. This position is comfortable and promotes safe turning on high-speed roadways.
A warning sign is usually yellow with black markings. This sign warns that the number of lanes ahead is reduced and that traffic will need to merge to the left.
It can be hard to judge the speed of oncoming vehicles. They do not always seem to be coming as fast as they really are. Always be sure you can safely change lanes when passing on a two-lane street. If you are not sure of an oncoming vehicle's speed, wait to pass until the oncoming vehicle has passed and you are sure there is enough space for you to change lanes safely.
Warning signs are usually yellow with black markings. This sign warns that your current road ends at an intersection straight ahead. Slow down and prepare to yield or stop before turning right or left.
When changing lanes, you must be sure that there are no vehicles in the space you want to enter. Check for other vehicles behind and to the side of your vehicle by checking your mirrors and blind spots. Always use the proper turn signal before changing lanes to allow surrounding vehicles time to react to your movements.
When a vehicle makes a turn, the rear wheels follow a shorter path than the front wheels. The longer the vehicle, the bigger the difference between the paths of the front and rear wheels. Therefore, long trucks often have to swing wide to complete a right turn.
It is not always easy to maintain a safe distance behind your vehicle. However, you can help keep the driver behind you a safe distance away from your vehicle by maintaining a steady speed and signaling turns, lane changes, and deceleration in advance.
Use low beam headlights when driving in fog, rain, or snow. High beams may reflect off of the weather and make visibility even poorer.
To prevent skidding on slippery surfaces, you should shift to a low gear before going down a steep hill. You should also follow farther behind the vehicle in front of you than you normally would. Quick stops should be avoided. Unless you have antilock brakes, pump the brakes to slow or stop.
You must not pass a vehicle that is stopped at a crosswalk. There may be pedestrians crossing the street that you cannot see. Instead, stop, proceeding only after all pedestrians have crossed.
A wet, slippery road does not allow your tires the traction they need, so it is necessary to drive more slowly on a wet road than you would on a dry road. To reduce the risk of skidding, you should avoid fast turns or stops.
Make room for vehicles that are entering a freeway. If possible, merge into the next lane to create a gap for the incoming vehicles. If you cannot merge, adjust your speed to allow for the vehicles to enter traffic as smoothly and safely as possible.
A driver should watch beside, ahead, and to the rear of their car. To be a good driver, you must know what is happening all around your vehicle.
There are many areas where you cannot park. Do not park within 25 feet of a stop sign at any time.
If your vehicle is hit from the rear while you are in forward motion, your body will be thrown backward. Press yourself against the back of your seat and put your head against the head restraint to prevent whiplash. Maintain a firm grip on the steering wheel and be ready to apply your brakes to avoid being pushed into another vehicle.
Blind or partially blind pedestrians may carry a white cane or use the assistance of a guide dog. You must always yield the right-of-way to a pedestrian who is using a guide dog or carrying a white cane.
Try more CAR Connecticut Practice Test
- Practice test 1
- Practice test 2
- Practice test 3
- Practice test 4
- Practice test 5
- Practice test 6
- Practice test 7
- Practice test 8
- Practice test 9
- Practice test 10
- Practice test 11
- Practice test 12
- Practice test 13
- Practice test 14
- Practice test 15
- Practice test 16
- Practice test 17
- Practice test 18
- Practice test 19
- Practice test 20
- Practice test 21
- Practice test 22
- Practice test 23
- Practice test 24
- 0Incorrect (5 allowed to pass)
- 0Correct