Over 95% pass rate when practice at DMV Practice Test

Wyoming CAR DMV Practice Test 2

Take 20 practice tests for CAR is the best way to prepare for your Wyoming DMV exam is by taking our free practice tests. The following question are from real Wyoming DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
20
Number of Question
35
Passing score
28
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. To improve visibility lowered by rain or fog, drivers should use their:
Low beam headlights.
High beam headlights.
Parking lights.

Use low beam headlights when driving in rain, snow, sleet, or fog. High beam headlights in adverse weather conditions lower visibility by reflecting off the precipitation and back into the driver's eyes.

2. This sign shows one type of:
/data/image/dmv_image/car/georgia-t_intersection(2).png
Right turn.
Intersection.
Lane change.

Warning signs are usually yellow with black markings. This sign warns that your current road ends at an intersection straight ahead. Slow down and prepare to yield or stop before turning right or left.

3. When changing lanes, you should never:
Cross the centerline in an intersection.
Check your blind spots by looking over your left or right shoulder.
Check for other drivers moving into the same lane.

Before changing lanes, check for drivers trying to pass you who may be trying to enter the same lane as you. Look over your shoulder to check your blind spot. You should never attempt to pass or otherwise change lanes in an intersection.

4. Always stop before crossing railroad tracks when:
There isn't room on the other side for you to completely cross the tracks.
The railroad crossing is located in a city or town that has frequent train traffic.
You are transporting two or more young children in a passenger vehicle.

Expect a train on any track, at any time, traveling in either direction. If you need to stop after crossing the tracks, wait until you can completely cross the tracks before proceeding. Make sure your vehicle clears the tracks before you stop.

5. This sign means:
/data/image/dmv_image/car/illinois-school_2.png
School zone or crossing.
Pedestrian crossing.
Railroad ahead.

A five-sided yellow or yellow-green sign alerts drivers to either a school zone or school crossing.

6. A driver should:
Stare directly in front of their car.
Only focus on the middle of the road.
Watch beside, ahead, and to the rear of their car.

A driver should watch beside, ahead, and to the rear of their car. To be a good driver, you must know what is happening all around your vehicle.

7. Excessive speed:
Does not increase the chance of a crash.
Increases your ability to react to a hazard.
Often leads to high-risk decision-making.

Excessive speed is one of the most common contributing factors to vehicle crashes. Excessive speed does not save time and often leads to high-risk decision-making.

8. To help avoid skidding on slippery surfaces, you should:
Shift to a lower gear after starting down a steep hill.
Speed up to enter curves and slow down to exit them.
Slow down before entering curves and intersections.

Slow down before you enter a curve because you do not know what may be ahead. Braking on a curve may cause you to skid.

9. When entering the interstate, check for a gap in traffic in the nearest lane, adjust your speed to match traffic, signal, and:
Expect traffic to allow you to proceed into the lane, since you have the right-of-way.
Merge carefully into the gap.
Wait for the lane to clear before merging.

Before merging into interstate traffic, you should identify a gap, accelerate to the speed of traffic, and signal. Merge into the gap when it is safe to do so. Be alert to other traffic and do not expect other drivers to clear the lane.

10. A U-turn is not permitted:
In a parking lot.
On or near any curve or hill.
On a straight roadway with a clear view for 500 feet in both directions.

You must never turn around while on or near any curve or hill. You may not be able to see oncoming traffic or pedestrians and may cause a collision.

11. This road sign means:
/data/image/dmv_image/car/georgia-do_not_enter.png
You are about to enter a one-way street from the wrong direction.
U-turns are prohibited.
You may proceed if the way is clear.

This sign marks a one-way road, entrance, or exit. If you are facing this sign, traffic is coming toward you. Turn around if you are driving toward this sign.

12. When driving in work zones, you should:
Increase your speed to get through the zone as quickly as possible.
Reduce your speed and be prepared to stop suddenly.
Maintain your normal speed the whole way through the zone.

When entering and driving through a work zone, slow down and be prepared to stop. Obey posted speed limits and be alert to conditions around you. Workers could be present.

13. This sign means:
/data/image/dmv_image/car/tennessee-slippery_when_wet.png
Slow down; curving road ahead.
Slow down and do not use your brakes.
Slow down; slippery when wet.

This sign warns that the road ahead becomes slippery when wet.

14. You are involved in a minor collision at an intersection. There are no injuries and there is very little vehicle damage. You should:
Leave your vehicle in the traffic lane until law enforcement arrives.
Move your vehicle out of the traffic lane, if possible.
Not move your vehicle for any reason.

After a collision, if no one has been injured or killed and you can safely do so, you should move your vehicle out of the traffic lane.

15. This sign means:
/data/image/dmv_image/car/georgia-divided_highway_ends_2.png
Curves ahead.
Divided highway starts.
Divided highway ends.

Warning signs are usually yellow with black markings. This sign warns that the divided highway ends ahead. Prepare to change lanes or shift lane position.

16. This sign means:
/data/image/dmv_image/car/tennessee-railroad_crossing.png
Stop sign ahead.
Railroad crossing ahead.
Construction ahead.

A round sign always indicates that you are approaching a railroad crossing.

17. The proper way to make a right turn is to:
Signal, slow down, and get into the lane closest to the centerline before turning.
Signal, slow down, and get into the lane closest to the right curb before turning.
Approach the corner in the lane nearest the right curb, but move over toward the middle of the street before turning.

Before beginning a right turn, use the appropriate signal to give surrounding drivers adequate notice of your intentions. Slow down and approach the intersection from the right lane, staying as close as is practical to the right curb or edge of the roadway.

18. There are oncoming vehicles to your left and a row of parked vehicles to your right. You should steer:
Closer to the oncoming vehicles than the parked vehicles.
Closer to the parked vehicles than the oncoming vehicles.
A middle course between the oncoming and parked vehicles.

If there are oncoming vehicles to your left and a row of parked vehicles to your right, the best thing to do is to split the difference. Steer a middle course between the oncoming cars and the parked cars.

19. This sign is used to warn drivers that:
/data/image/dmv_image/car/georgia-reduction_of_lanes.png
The right lane is ending and traffic should merge left.
The road curves ahead.
There are upcoming intersections.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign warns drivers that the number of lanes is reduced ahead and that traffic should merge left.

20. A driver entering interstate traffic from an entrance or acceleration ramp:
Has the right-of-way.
Should yield to drivers already on the interstate.
May force their way into traffic.

If you are entering interstate traffic from an entrance or acceleration ramp, yield to drivers already on the interstate. Merge safely into traffic when you are able to do so.

21. When stopping on snow or ice, drivers who are operating vehicles equipped with an Anti-Lock Braking System (ABS) should:
Pump the brakes.
Press and hold the brake pedal firmly.
Stay off the brakes and wait for the car to drift to a stop.

When driving a vehicle equipped with an Anti-Lock Braking System (ABS), a driver should press the brake pedal firmly when stopping on a snowy or icy surface. The ABS will pump the brakes more rapidly than a driver would be able to.

22. When approaching a person who is crossing the street while using a white cane or guide dog, you should:
Stop until the person is well away from your path of travel.
Honk your horn as you proceed past them.
Carefully drive around them.

When approaching a pedestrian who is using a white cane or guide dog while crossing the street, you must stop until the person is well away from your path of travel. Always yield the right-of-way to blind pedestrians.

23. Only ____ can reduce blood alcohol content (BAC) and alcohol's effects on the body.
Drinking caffeine
Eating foods high in fat
Time

Only the passage of time can remove alcohol and its impairing effects from the body.

24. When passing on the left of a vehicle, it is safe to move back into the right lane:
After about three seconds.
When you can no longer see the vehicle over your right shoulder.
When you can see the front of the vehicle in your rearview mirror.

When passing another vehicle on its left, you may move back into the right lane when the headlights of the passed vehicle can be seen in your rearview mirror. Always signal before changing lanes.

25. Backing your vehicle is:
Always dangerous.
Dangerous if you have a helper.
Only dangerous in large vehicles.

Backing up is always dangerous because it is hard to see behind your vehicle. Use extra caution when backing up.

26. When you are behind a motorcycle, you should:
Be ready to use your horn.
Drive more slowly.
Allow a larger following distance.

When following a motorcyclist, allow for at least a three- to four-second following distance. Motorcycles can stop quickly and following them too closely endangers your life and that of the motorcyclist. If the motorcyclist should fall, you need extra distance to avoid the rider. The chances of a fall are greatest on wet and icy roads, gravel roads, and metal surfaces such as bridges, gratings, and streetcar or railroad tracks.

27. Night driving presents unique problems because:
The speed limit is increased at night.
There are fewer cars on the roads at night.
Distance and vehicle speed are difficult to judge in the dark.

Night driving creates a unique set of problems for drivers. Due to the reduced visibility, it can be difficult to judge distance and the traveling speeds of other vehicles when driving at night. Drivers can see only as far as their headlights allow.

28. Excessive speed:
Saves time so you can get to your destination more quickly.
Helps you maneuver around obstacles.
Increases the likelihood of serious bodily injury and death.

Excessive speed is one of the most common contributing factors to vehicle crashes. Excessive speed does not save time and often leads to high-risk decision-making.

29. Water on the road can cause a vehicle to hydroplane. Your car may hydroplane at speeds as low as:
45 miles per hour.
35 miles per hour.
40 miles per hour.

Hydroplaning occurs when there is standing water on a roadway. At speeds up to 35 mph, most tires will channel water away from the tire. As your speed increases past 35 mph, tires cannot channel the water as well and your tires may start to lose contact with the road and ride over the water like a set of water skis.

30. This sign means:
/data/image/dmv_image/car/nebraska-hill.png
Trucks entering.
Truck exit only.
Steep downgrade ahead.

This sign warns that a steep downgrade is ahead on the road. Drivers should check their brakes.

31. You exit the freeway on a ramp that curves downhill. You should:
Slow to a safe speed before the curve.
Slow to the posted speed limit for the freeway.
Wait until you have entered the curve to begin braking.

You should always slow down before entering a curve. You may not be able to see hazards ahead and braking in a curve may cause your vehicle to skid.

32. This sign means:
/data/image/dmv_image/car/illinois-two_way_roadway.png
Two-way traffic.
Change in direction ahead.
School zone and crossing.

This sign informs drivers that they are leaving a divided roadway and approaching a two-way highway.

33. When you see this sign, you should stop and:
/data/image/dmv_image/car/california-stop.png
Check for vehicles only in the direction that you plan on going, then proceed.
Let all vehicles that arrive before or after you go first.
Check for traffic in all directions before proceeding.

At a stop sign, you must come to a full stop and check for traffic in all directions before proceeding.

34. Where is it safe to pass another vehicle?
Within an intersection where there are no oncoming vehicles
Wherever signs and/or pavement markings permit passing
Within a curve where there are no oncoming vehicles

Never pass within intersections or at other intersecting points, such as parking lot entrances and alleyways. Any time your view is blocked by a curve or a hill, you should stay in your lane and assume that there is an oncoming vehicle just out of sight. Wherever signs and/or pavement markings permit passing other vehicles, you will have to determine whether or not you have enough space to pass in a safe manner.

35. If your vehicle begins to skid, you should:
Ease up on the gas pedal.
Brake as hard as possible.
Turn off the ignition.

If your vehicle begins to skid, release the accelerator or brake pedal to regain vehicle balance. Steer in the direction of the skid to regain control of the vehicle.

Your Progress
  • 0Incorrect (7 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35