Over 95% pass rate when practice at DMV Practice Test

Wyoming CAR DMV Practice Test 15

Take 20 practice tests for CAR is the best way to prepare for your Wyoming DMV exam is by taking our free practice tests. The following question are from real Wyoming DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
20
Number of Question
35
Passing score
28
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. This road sign means:
/data/image/dmv_image/car/maryland-no_right_turn.png
No right turn.
No U-turns.
No left turn.

Regulatory signs provide notice to road users of traffic laws and must be obeyed. Where this sign is posted, making a right turn is prohibited.

2. Backing your vehicle is:
Always dangerous.
Dangerous if you have a helper.
Only dangerous in large vehicles.

Backing up is always dangerous because it is hard to see behind your vehicle. Use extra caution when backing up.

3. Before switching on the ignition, you should:
Buckle your safety belt.
Be sure all passengers have buckled their safety belts.
Both of the above.

Develop a routine for entering and leaving your car. Before switching on the ignition, buckle your safety belt and see that all passengers do likewise.

4. This road sign means:
/data/image/dmv_image/car/arkansas-speed_limit_55.png
You must travel through the intersection at the posted speed limit.
The maximum speed limit under ideal conditions is 55 mph.
You must not travel below the speed indicated.

Regulatory signs provide notice to road users of traffic laws that must be obeyed. This particular sign tells you the maximum speed limit for the stretch of highway where it is posted. You may drive more slowly than the posted speed limit, based on road conditions, but it is illegal to drive any faster than the posted speed limit.

5. Which of the following is a dangerous habit when driving in work zones?
Tailgating another vehicle
Failing to carefully watch for workers and moving equipment
Both of the above

When driving in a work zone, adjust your speed for the traffic conditions and don't follow other vehicles too closely. Be attentive to workers and machines in the work zone.

6. This sign is a:
/data/image/dmv_image/car/washington-warning.png
Service sign.
Regulatory sign.
Warning sign.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. There may be an upcoming change in traffic direction, a steep downgrade, or another potentially hazardous situation that requires action on the part of the driver.

7. When driving in a construction zone:
Slightly increase your speed.
Expect the unexpected.
Expect construction workers to yield to motorists.

You may encounter unexpected conditions in a construction zone. For the safety of yourself, other drivers, and construction workers, drive with extraordinary caution.

8. You are approaching a green traffic light and traffic is blocking the intersection. What is the best thing to do?
Partially enter the intersection to establish your right-of-way.
Don't enter the intersection until you can get completely across.
Continue into the intersection and wait for traffic to clear.

Even if your light is green, you must not enter an intersection unless you can get completely through the intersection before the light turns red. If you block the intersection, you can be cited.

9. What is the only effective way to remove alcohol from the body?
Drink strong coffee.
Wait.
Take a cold shower.

The only way to remove the effects of alcohol from the body is to let time pass. Eating, drinking coffee, or taking a shower will not speed up this process.

10. This sign means:
/data/image/dmv_image/car/illinois-slippery_pavement.png
Slippery when wet.
Stop sign ahead.
No U-turn.

All roads are slippery and dangerous when wet. This sign warns of conditions that can cause a driver to lose control of a car. A driver should slow down when coming upon wet pavement because it takes longer to stop.

11. A broken yellow line beside a solid yellow line indicates that:
Passing is permitted from the lane next to the solid yellow line.
Passing is not permitted from either direction.
Passing is permitted from the lane next to the broken yellow line.

A broken yellow line alongside a solid yellow line means that traffic in the lane next to the broken line may cross the line to pass, while traffic in the lane next to the solid line may not.

12. The speed limit in school zones is:
20 mph.
30 mph.
45 mph.

Unless otherwise posted, drivers in school zones may not drive faster than 20 mph. Always use caution when driving near children.

13. If you approach a flashing red traffic light, you:
/data/image/dmv_image/car/maryland-flashing_red_light.png
Are traveling in the wrong direction.
Must treat the intersection as if it is controlled by a stop sign.
May not proceed until it changes to green.

Treat a flashing red light the same as a stop sign. Come to a complete stop at the stop line or, if there is no stop line, prior to the crosswalk and before entering the intersection. Yield to all other traffic and pedestrians.

14. A steady yellow traffic signal light is a warning that the light is about to change to red. If you are already within the intersection when a green light changes to yellow, you should:
Stop.
Continue moving and clear the intersection safely.
Increase your speed so as not to cause an accident.

If you are already within an intersection when the traffic light turns yellow, you should clear the intersection as quickly as possible.

15. You are preparing to exit the interstate. When should you start reducing your speed?
About halfway through the deceleration lane.
As you approach the deceleration lane.
Immediately upon entering the deceleration lane.

When leaving an interstate, you should maintain your speed until you enter the deceleration lane, at which point you should reduce your speed to the exit ramp's posted advisory speed.

16. If a tire suddenly blows out while you are driving, you should:
Grip the steering wheel firmly, slow down, and exit the traffic lane.
Pump the brakes rapidly.
Brake hard and steer toward the right edge of the roadway.

If you experience a sudden tire blowout, do not panic. Grasp the steering wheel firmly and take your foot off the accelerator to allow the vehicle to roll to a stop. Lightly apply the breaks when it is safe to do so. Do not move to the shoulder of the road until the car has slowed considerably.

17. What does this road sign mean?
/data/image/dmv_image/car/georgia-hill.png
Falling rocks
Trucks use second gear
Steep hill

Warning signs are usually yellow with black markings. This sign indicates that you are approaching a steep hill. Slow down and be ready to shift to a lower gear to control your speed and protect your brakes from damage.

18. At intersections with a "Yield" sign, you must:
Yield the right-of-way to cross traffic that is near enough to cause conflict.
Yield the right-of-way only to vehicles on your right.
Always slow down and proceed without stopping.

At a yield sign, you must slow down or stop, if necessary, and give the right-of-way to crossing or merging vehicles. Yield the right-of-way to any cross traffic that is close enough to cause conflict.

19. Before stopping your vehicle at a traffic signal or sign, you should:
Press down hard on the accelerator.
Check your mirrors for surrounding traffic.
Set the parking brake.

When stopping your vehicle on the roadway, first check your mirrors for traffic. Be aware of surrounding drivers as you release the accelerator and allow your vehicle to slow. Move your foot to the brake pedal and press with steady pressure for a smooth stop.

20. When parking your vehicle on any hill:
One of your rear wheels should touch the curb.
Use your parking brake and leave the vehicle in "park."
Your front wheels should be parallel to the road, if there is no curb.

When parking on a hill, you should always leave your vehicle in gear or in the "park" position. If there is no curb, you should turn your front wheels so that the vehicle will roll away from the center of the road if the brakes fail. If there is a curb, the front wheels should be turned toward it (if headed downhill) or away from and gently touching it (if headed uphill).

21. Which lane must you be in before making a left turn from a one-way street?
The lane nearest the left curb.
The lane nearest the center of the street.
The lane nearest the right curb.

When making any turn, turn from the lane closest to the direction you wish to travel into the first available legal lane. If you are making a left turn from a one-way street, this means that you would make the turn from the lane nearest to the left curb.

22. When you drive through a construction zone, you should:
Stop to watch the workers.
Decrease your following distance.
Pass the construction zone carefully and not “rubberneck."

To avoid contributing to chronic traffic congestion, you should not "rubberneck." That is, you should not slow down to look at out-of-the-ordinary things.

23. At a red traffic light with a green arrow, you may proceed in the direction of the arrow if:
You first come to a complete stop.
You wait until the light changes.
You are in the proper lane and the roadway is clear.

If you are in a lane corresponding to a signal displaying a green arrow, you may proceed in the direction of the arrow when the way is clear. This is true whether the arrow is displayed alone or together with another signal.

24. What should a driver do when approaching a traffic control signal that is not in operation?
Come to a full stop and yield the right-of-way before entering the intersection.
If the intersection is clear, the driver does not need to stop.
Drive quickly through the intersection to get out of the way of other vehicles.

When traffic control signals are not working, a driver must always treat the intersection as an all-way stop and come to a complete stop, unless otherwise directed by law enforcement. The driver must then look and yield the right-of-way before entering the intersection.

25. Which statement is true?
You should put on your cruise control near a railroad crossing to maintain a constant speed.
You must stop at a railroad crossing when directed to do so by a flagger or stop sign.
You have the right-of-way at a railroad crossing and do not need to stop.

You must stop at a railroad crossing when directed to do so by a flagger, stop sign, or warning signal. Use caution when driving near railroad tracks.

26. While driving on a roadway with a single broken white centerline:
You must stay within your lane.
You may cross the centerline to change lanes.
You may change lanes only from the left lane.

White lines between lanes indicate that the lanes are traveling in the same direction. Broken white line markings indicate that it is legal to pass another vehicle when safe.

27. When you see this sign, you:
/data/image/dmv_image/car/california-railroad_crossing.png
Are approaching a railroad crossing and should prepare to stop.
Will always stop at the upcoming railroad crossing.
Should stop and wait for a signal before crossing the railroad tracks.

This sign indicates that you are approaching a railroad crossing. You must look, listen, slow down, and prepare to stop. Wait for any trains to pass before you proceed.

28. You see pedestrians near the road. You should:
Sound your horn and maintain your speed.
Speed up to clear the area quickly.
Slow down and pass with caution.

Watch for any pedestrian who may cross your path. If you see pedestrians near the road where you are driving, slow down and be prepared to stop, if necessary.

29. If there is no crosswalk and you see a pedestrian crossing your lane, you should:
Make sure the pedestrian can see you before proceeding.
Cautiously drive around the pedestrian.
Stop and let the pedestrian finish crossing.

Drivers must always yield the right-of-way to pedestrians in the roadway, even if there is not a marked crosswalk.

30. This sign means:
/data/image/dmv_image/car/georgia-no_right_turn.png
No U-turn.
No left turn.
No right turn.

Where this sign is posted, it is prohibited to make a right turn. It would be unsafe and unlawful to make a right turn at an intersection with this sign.

31. This sign is used to warn drivers about:
/data/image/dmv_image/car/georgia-curve_right.png
Upcoming intersections.
Road construction.
Road curves ahead.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign is used to warn drivers about an upcoming curve to the right.

32. What does this road sign mean?
/data/image/dmv_image/car/georgia-stop.png
Slow down and prepare to stop if cars are approaching you.
Come to a full stop then proceed when it is safe to do so.
Proceed carefully through the intersection, not always stopping.

An octagonal sign always means stop. When approaching a stop sign, you must come to a complete stop at the marked stop line and proceed only when it is safe to do so. If there is no stop line, stop before the crosswalk. If there is no crosswalk, stop before the intersection at a point from which you can see any oncoming traffic.

33. This sign means:
/data/image/dmv_image/car/tennessee-yield_ahead.png
Yield sign ahead.
Side road entering from left.
Stop sign ahead.

This sign indicates that there is a yield sign ahead. You should begin to slow down when you see this warning sign.

34. Give the right-of-way to any pedestrian who is:
In a marked crosswalk.
In any crosswalk or intersection.
Crossing any street.

Drivers must yield the right-of-way to pedestrians who are crossing the street in any marked or unmarked crosswalk. In the interest of safety, drivers should yield the right-of-way to people crossing any street.

35. If you are driving near a large commercial vehicle, you should:
Follow the large vehicle closely to reduce wind drag on your vehicle.
Avoid driving beside it for long stretches of time.
Drive on its right side when on curves and hills.

Because large commercial vehicles have large blind spots on each side, you should avoid driving beside them for long periods of time.

Your Progress
  • 0Incorrect (7 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35