Wisconsin MOTORCYCLE DMV Practice Test 13

When passing parked vehicles, use caution. You may encounter vehicles pulling away from the curb or leaving parking spaces.

If a yellow panel with the message "Exit only" is on a highway sign, the lane below the sign will not continue through the interchange. Instead, the lane will go off of the roadway to form a ramp. If you are in a lane directly under an "Exit only" sign, you may change lanes to move through the interchange or you must exit the highway.

This sign indicates that workers may be on or very close to the roadway ahead, so you should take special care when traveling through the area.

This sign warns that deer cross the roadway in the area. You should slow down, be alert, and be ready to stop.

Regulation signs regulate traffic speed and movement, displaying rules which drivers must obey. This regulation sign indicates that parking is not permitted.

Signs providing information about destinations are green with white letters or symbols.

This sign marks parking spaces that are reserved for people with disabled parking permits.

No matter the speed, riders who are not wearing helmets are three times more likely to die from head injuries than riders who are wearing helmets at the time of a crash.

This sign indicates that the road ahead winds with a series of turns or curves.

It is possible to use both brakes while turning, but it must be done with great care. Some of the usual traction is being used to make the turn while the motorcycle is leaning, so less traction is available for stopping.

When being passed, motorcyclists should be careful not to be hit by any part of the passing vehicle, including its mirrors. In addition to the vehicle itself, motorcyclists should also be aware of wind gusts coming from the passing vehicle and potential objects being thrown by a passenger in the vehicle who may not be paying attention to the road.

An octagonal (eight-sided) sign always means "Stop." Come to a complete stop, yield to traffic and pedestrians that have the right-of-way, and proceed when the way is clear.

A solid white line on the side of the road is used to indicate the right edge of a traffic lane.

This sign means that you are approaching an upcoming intersection. Watch carefully for cross traffic.

Warning signs are normally diamond-shaped and yellow, although orange warning signs are used in work areas. Such signs warn that you are approaching a hazardous location or an area where special rules apply.

Unlike drivers of larger vehicles, a motorcyclist has three lane position options in their travel lane. The rider should select whichever position is safest based on road and traffic conditions.

If you accidentally lock the rear brake on a good traction surface, you can keep it locked until you have completely stopped. You should still be able to steer your motorcycle with a locked rear wheel.

The surest way to avoid the risks of riding under the influence of alcohol is to not ride after you have been drinking. Any amount of alcohol can impair your abilities.

Maintaining an adequate space cushion ensures that you will have time to respond if another driver makes a mistake. A cushion of space also allows you the space you need to safely maneuver your motorcycle.

To ride safely at night, you should reduce your speed, use your high beam headlight when you are not riding near other vehicles, and increase your following distance. Take advantage of vehicles ahead of you to provide clues about the upcoming road. Their headlights may help to illuminate the road ahead and their taillights will bounce up and down if the vehicle is being driven over bumps on the road.

A skidding rear tire is a dangerous condition that can result in a violent crash and serious injury or death. Too much rear brake pressure can cause the rear wheel to lock. As soon as the rear wheel locks, your ability to change direction is lost. To regain control, the brake must be released.

You should wear appropriate protective clothing when riding. Protective garments include sturdy pants and jackets that entirely cover your arms and legs, boots or heavy shoes that cover and support your ankles, and sturdy gloves.

You should use your low beam headlight when riding in snowy, rainy, or foggy weather. A high beam headlight can reflect off of these conditions and make it more difficult for a rider to see.

Both brakes should be used at the same time whenever you slow or stop.

To reduce the risk of a crash, you should always ensure that you are visible to others. Communicate your intentions through proper use of your signals, brake light, and lane position. Maintain a space cushion around your motorcycle and consistently scan the road ahead of, behind, and next to your vehicle.

A motorcycle must lean to make a turn. To make it lean in the appropriate direction, press the handgrip in the direction you want to turn.

Under wet conditions, it is recommended that you avoid the oily center strip of the lane and ride in the wheel tracks left by vehicles ahead.

To ensure that you are getting as much protection as possible, choose a helmet that meets U.S. Department of Transportation (DOT) and state standards. Helmets should fit snugly all the way around.

The best way to deal with a tailgater is to allow them to pass you. Speeding up may only result in them continuing to tailgate you at the higher speed, which is even more dangerous.

If you over-apply your brakes, you may lose traction on one or both wheels and crash.

In Wisconsin, helmets are required to be worn by any operator under the age of 18 and any operator who holds a motorcycle instruction permit. However, it is strongly recommended that all operators and passengers wear helmets when riding.

When following a car, you should ride in a position that allows the driver to see you in their rearview mirror. Usually, that means riding in the center portion of the lane. Because most drivers check their rearview mirrors much more often than they check their side mirrors, being in this lane position increases the chance that they will see you.

Choose a helmet that meets U.S. Department of Transportation (DOT) and state standards. It should fit you snugly all the way around and be free of obvious defects.

Before transporting a passenger or heavy load in traffic for the first time, practice riding on a quiet road to get used to how your motorcycle handles differently with the additional weight.

When approaching a blind intersection, move into the portion of the lane that will bring you into any other driver's field of vision at the earliest possible moment.

If the front wheel locks up while you are braking, release the pressure from the front brake. Immediately re-apply pressure to the brake with controlled gradual pressure.

A plastic, shatter-resistant face shield helps protect your entire face, including your eyes. Goggles can protect your eyes, but not the rest of your face. A windshield is not an adequate substitute for either.

The throttle of a motorcycle is usually located on the right handle grip. Be sure to know where all of your motorcycle's controls are located before riding.

To reduce the risk of injury, riders should wear a helmet, eye protection, heavy shoes or boots, full-length pants, a jacket, and full-fingered gloves. Clothing should be made of durable materials to best protect the wearer.

If steering suddenly feels heavy, it is possible that your front tire has gone flat. Stop riding and check your tires as soon as possible.