Wisconsin MOTORCYCLE DMV Practice Test 12

Pentagonal signs indicate that you are in or are approaching a school zone and/or school crossing. Be aware of children when driving near a school zone and follow posted speed limits.

A yield sign means that you must slow down and yield the right-of-way to traffic in the intersection or roadway you are entering.

A five-sided yellow or yellow-green sign alerts drivers to either a school zone or school crossing.

The stop sign is the only eight-sided sign you will see on any roadway. When you encounter a stop sign, you must come to a complete stop. You may not proceed until the way is clear for you to completely and safely pass through the intersection.

This sign indicates that you are approaching a railroad crossing.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign warns that you are leaving a separated one-way highway and will soon be driving on a two-way highway.

Signs that are blue with white markings indicate the locations of services. These services may include rest areas, gas stations, food options, and hospitals.

This sign indicates that a school crossing is ahead.

This sign is displayed on the rear of slow-moving vehicles that may be moving more slowly than 25 mph, such as construction equipment, farm machinery, or horse-drawn vehicles.

A five-sided sign indicates that you are near a school. Be aware and stop if children are in the crosswalk.

This sign is placed at the beginning of one-way streets and ramps to indicate that you must not continue driving in your current direction.

This sign indicates that the road that you are on intersects with a divided highway. A divided highway is two one-way roadways separated by a median or guide rail.

At a railroad crossing marked with this sign, a driver should look both ways, listen for any trains, and be prepared to stop if any trains are nearby. Never try to outdrive an oncoming train.

Warning signs provide notice to road users of a situation that might not be readily apparent and are usually yellow with black markings. This sign warns drivers of an upcoming steep hill. Drivers should adjust their speed accordingly to avoid collisions and brake damage.

This sign warns of of an approaching traffic signal.

You can reduce your risk of injury when riding a motorcycle by wearing an approved helmet, face or eye protection, and protective clothing.

There are several advantages to keeping groups of riders small. In comparison to a large group, a small group is easier for other vehicles to pass safely, is less likely to get separated by traffic or stop lights, and creates less need for slower riders to hurry to catch up to the rest of the group.

A motorcycle will continue to ride like new if it is properly maintained and routine inspections become a part of its regular maintenance cycle.

You should wear gear that helps protect you while you ride. It is best to wear a DOT-approved helmet, face or eye protection, and protective clothing.

You should never take eye contact with another driver as a guarantee that they will properly yield to you. It is not uncommon for a driver to look directly at a motorcyclist and still fail to notice them.

When being passed, it is generally a good idea to ride in the center portion of your lane. Being on the side nearest the passing vehicle increases your risk of a collision. Being on the side farthest from the passing vehicle may prompt the other driver to merge back into your lane before it is safe.

In general, it is safest to simply proceed straight in your lane when crossing angled railroad tracks. Turning to approach tracks at a right angle can be dangerous because it may send you traveling into another lane.

The minimum number of drinks remaining in a person's system can be estimated by subtracting the number of hours since their last drink from the total number of drinks consumed. For example: a person who has consumed seven drinks in three hours would have a minimum of four drinks remaining in their system three hours later.

If not carried in saddlebags, loads should be secured as low as possible. Attaching a load to a sissy bar can raise the motorcycle's center of gravity and upset its balance.

The best way to help other drivers see your motorcycle is to keep your headlight on whenever you ride. During the day, a motorcycle with its headlight on is twice as likely to be noticed.

Before every ride, be sure to check your tires' inflation pressure, your tires' treadwear, and the general condition of the sidewalls and tread surface on the tires.

Long-term exposure to wind noise can cause permanent damage to your hearing. Using ear protection when you ride should protect you from the dangers of wind noise while still allowing you to hear important sounds, like sirens or car horns.

An appropriate lane position can increase your ability to see and be seen. Being properly positioned in a lane can also help you avoid blasts of wind coming off of surrounding vehicles.

Each traffic lane provides three paths of travel for motorcyclists: the left, center, and right portions of the lane.

Perform safety checks before every motorcycle ride. Test your brake controls individually to make sure each one activates the brake lights.

Appropriate clothing can reduce the risk of injury in a crash. Choose a jacket and pants that cover your arms and legs, are made of sturdy material, and are snug enough that they do not flap in the wind.

When preparing to pass another vehicle on its left, you should ride in the left portion of your lane. This will increase your line of sight and make you more visible to oncoming traffic.

Wearing reflective and brightly-colored clothing is always a good idea when riding a motorcycle. Crashes occur in broad daylight and at night, so it is best to wear highly visible clothing at any time of day.

Your feet should remain on your footrests while riding to help you maintain proper balance.

You should not carry a passenger unless your motorcycle has a seat that is large enough for two riders. The motorcycle should be equipped with footrests for the passenger. Your passenger should wear the same kind of protective gear that is recommended to operators.

If the throttle becomes stuck and you are unable to free it, immediately operate the engine cut-off switch and pull in the clutch at the same time. This will remove power from the rear wheel until you are able to safely leave the road and stop.

When approaching a blind intersection, move into the lane position that makes you the most visible to surrounding drivers.

As your weight shifts forward while you are braking, the amount of traction available to the front wheel increases. This means that you can begin to apply the front brake harder.

There is no lane position that is always best and no lane position that should always be avoided. Select a lane position that is appropriate for riding conditions.

An effective face shield should be free of scratches, be resistant to penetration, allow clear views to both sides, fasten securely, permit air to pass through, and provide enough space for eyeglasses or sunglasses to be worn underneath. It is important for a face shield to permit the passage of air because an airtight face shield can create fogging and make it difficult for a rider to see.