West Virginia CDL DMV Endorsement Passenger 2

Take 10 practice tests for CDL is the best way to prepare for your West Virginia DMV exam is by taking our free practice tests. The following question are from real West Virginia DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test

Number of Question

Passing score

13%

0Correct
0Incorrect

Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. After a vehicle is started, the engine oil pressure should come up to normal:

Within seconds.

Within five minutes.

Within three minutes.

After five minutes.

After a vehicle's engine is started, the engine's oil pressure should rise to its normal level within seconds. Do not drive a vehicle with oil pressure that is too low.

2. When approaching a railroad crossing:

You will likely be able to outdrive a train.

You should not rely only on warning signals.

You should roll a window down to listen for an approaching train.

You should only worry about the track closest to your vehicle.

You should never rely only on warning signals to alert you to an approaching train. Never try to race a train to a crossing. If there are multiple tracks at a crossing, be sure to check all tracks in both directions before starting to cross.

3. If an approaching driver is using their high beam headlights, you should:

Look directly at the headlights.

Flash your high beam lights to remind the driver to switch to their low beams.

Look to the right side of your lane until the vehicle has passed.

Pull to the side of the road until the vehicle has passed.

If a vehicle is coming toward you while using its high beam headlights, glance away from the headlights and toward the right side of the road until the vehicle has passed. This will keep you from being blinded by the lights.

4. Mirror adjustment should be:

Checked once a month.

Checked before every trip.

Checked, but only if the driver plans to use the mirrors.

The adjustment of your mirrors should be checked prior to the start of all trips. Adjust your mirrors as needed.

5. When driving:

You should always drive at the posted speed limit.

You should always drive slightly below the posted speed limit.

You should adjust your speed according to conditions.

You should drive as fast as possible.

Operators driving too fast is a major cause of fatal crashes. You must continually adjust your speed to a rate that is safe for road and traffic conditions.

6. About how many drinks does it take for a 200-pound person to reach a 0.02 percent blood alcohol concentration (BAC)?

One

Two

Three

Four

Alcohol impairment begins long before the legal limit is reached. A 200-pound person will reach a blood alcohol concentration (BAC) of 0.02 percent after a single drink.

7. When checking the air and electrical lines during a vehicle inspection, all of the following should be true, except:

The air hoses are making a hissing noise.

The air hoses and electrical lines are not cut.

The air lines are not pinched.

The air lines are not dragging against tractor parts.

When examining the air and electrical lines as part of your vehicle inspection test, you must listen for leaks. Ensure that the air hoses and electrical lines are not cut, chafed, spliced, or worn. Make sure air and electrical lines are not tangled, pinched, or dragging against tractor parts.

8. If you are being tailgated, you should:

Drive on the shoulder.

Pull off the roadway.

Drive faster.

Allow the vehicle to pass.

If you are being tailgated, it is best to allow more room to open up in front of your vehicle. This will help you avoid the need for sudden stops, which could result in the tailgater rear-ending you, and will make it easier for the tailgater to pass. Speeding up may only make things more dangerous by prompting the other driver to continue tailgating you at a higher speed.

9. Rollovers happen when:

Drivers turn too fast.

Drivers turn too slowly.

There is a lot of traffic.

Vehicles are too close to one another.

A rollover happens as a result of a driver changing lanes or turning too quickly.

10. Accelerating roughly is:

Encouraged at slow speeds.

Encouraged at all speeds.

Discouraged, as it may cause damage to the vehicle.

Discouraged, as it may confuse other drivers.

When accelerating, speed up smoothly and gradually so your vehicle does not jerk. Rough acceleration can cause mechanical damage.

11. To avoid becoming an aggressive driver, you should:

Plan trips without allocating extra time for traffic.

Tailgate.

Drive slowly in the left lane.

Not make gestures to other drivers.

To avoid becoming an aggressive driver, begin a trip with realistic expectations of how long the trip will take, allowing extra time for traffic delays. Do not tailgate other vehicles. To avoid upsetting other drivers, do not drive slowly in the left lane and do not gesture at the drivers (even in seemingly minor ways, like shaking your head).

12. When traveling with cargo, you must make sure the cargo is secure:

No more than two times.

Every 150 miles or three hours of driving.

Only after traveling up a hill.

Only after coming to a hard stop.

Cargo should be inspected before beginning a trip, within the first 50 miles of the trip, and every three hours or 150 miles traveled. The driver of a truck transporting cargo is responsible for the cargo being safely secured throughout the trip.

13. During the skills test, if making a turn that requires a stop, you should:

Skid to a stop.

Stop after the stop line to get a better view.

Allow your vehicle to roll.

Keep the front wheels aimed straight ahead.

If you must come to a stop before making a turn during the driving skills test, you should come to a smooth stop behind any stop line, crosswalk, or stop sign. Keep your front wheels aimed straight ahead and do not let your vehicle roll. If stopping behind another vehicle, stop where you are still able to see the rear tires of the vehicle ahead of you.

14. When driving:

It is best to hide your intentions from others.

You should only use turn signals if there are vehicles near you.

You should not use turn signals in construction zones.

You should always use turn signals to warn others about your intentions.

It is important to communicate your intentions to others on the road. Make sure to signal before turning or changing lanes, even if no other vehicles are nearby.

15. Tread depth in the major grooves on a front tire should be at least:

3/4 of an inch.

1/2 of an inch.

4/32 of an inch.

1/16 of an inch.

Tires need to have at least 4/32 of an inch of tread depth in every major groove on the front tires, and at least 2/32 of an inch of tread depth on other tires.

16. Emergency exit signs:

May sometimes be hidden by cargo on the bus.

Do not need to be displayed because the purpose of an emergency exit is always clear.

Should be painted blue.

Should be clearly visible and identifiable.

The emergency exit signs on a bus must always be clearly visible. The emergency door light must work properly, if applicable.

17. During the steering box portion of the vehicle inspection test, you should not:

Ensure that the steering box is securely mounted.

Ensure that the steering box is free of leaks.

Look for missing bolts in the steering box.

Assume all cotter keys are present.

Before a trip, ensure that the steering box is securely mounted. Check for missing nuts, bolts, and cotter keys. Be sure that there are no power steering fluid leaks and that there is no damage to power steering hoses.

18. Belts in the engine compartment should be:

Frayed.

Tight.

Greasy.

Easy to slide off.

When inspecting your vehicle's engine, check the belts for tightness and excessive wear. The amount of "give" that is safe for each belt in a given engine will vary, so learn what is appropriate for your vehicle.

19. An example of mandatory emergency equipment is:

A supply of spare electrical fuses.

A loud horn.

A battery-operated flashlight.

A supply of fireworks.

Mandatory emergency equipment includes: at least one fire extinguisher; spare electrical fuses (unless the vehicle is equipped with circuit breakers); and warning devices for parked vehicles (such as reflective triangles).

20. If a vehicle is found to be over-length during a pre-trip inspection, the driver should:

Trim the length of the load.

Ask someone else to drive.

Ensure flags and lights indicating the oversize load are fastened securely.

Drive without making any changes.

If a pre-trip inspection reveals a load to be oversize, the driver must confirm that all required signs, flags, lamps, and reflectors are safely and properly mounted, and that and all required permits are in their possession.

Try more CDL West Virginia Practice Test

Your Progress

0Incorrect (4 allowed to pass)
0Correct