Over 95% pass rate when practice at DMV Practice Test

West Virginia CDL DMV Knowledge Test Class A 2

Take 6 practice tests for CDL is the best way to prepare for your West Virginia DMV exam is by taking our free practice tests. The following question are from real West Virginia DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
6
Number of Question
35
Passing score
28
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. When conducting a vehicle inspection, you must show each of the following, except:
That the oil pressure gauge is working.
That the oil pressure warning light turns off, or that the gauge shows increasing or normal oil pressure.
That the oil temperature gauge, if equipped, rises to the normal operating range.
That the oil pressure gauge comes on when brakes are used.

When checking the oil pressure gauge as part of a vehicle inspection test, you must ensure that it is working. The gauge should show increasing or normal oil pressure, or the oil pressure warning light should turn off. If equipped with one, the oil temperature gauge should begin a gradual rise to the normal operating range.

2. A steering wheel should be held:
With both hands.
With one hand, keeping the other hand free for other tasks.
With one hand at a time, alternating between hands.
At the base of the wheel.

A steering wheel should be held firmly with both hands, positioned on opposite sides of the wheel.

3. When nearing a construction worker who is close to the road, you should:
Increase your speed.
Decrease your speed.
Not drive in any lane.
Wait until the construction is complete before proceeding.

In work zones, you should drive at the posted speed limits. Reduce your speed even further when workers are on or near the road.

4. An example of mandatory emergency equipment is:
A supply of spare electrical fuses.
A loud horn.
A battery-operated flashlight.
A supply of fireworks.

Mandatory emergency equipment includes: at least one fire extinguisher; spare electrical fuses (unless the vehicle is equipped with circuit breakers); and warning devices for parked vehicles (such as reflective triangles).

5. During the vehicle inspection test, you will be required to do all of the following, except:
Walk around the vehicle.
Point to or touch each item.
Explain what you are checking and why.
Crawl under the vehicle.

As a part of earning your CDL, you will have to pass an inspection test and demonstrate that your vehicle is safe for operation. During the vehicle inspection test, you will have to walk around the vehicle and point to or touch each item and explain to the examiner what you are checking and why. You will not have to crawl under the hood or under the vehicle.

6. What is Gross Vehicle Weight Rating (GVWR)?
The loaded weight of a single vehicle as stated by the manufacturer
The total weight of the vehicle without a laod
The total weight of the cargo minus the containers used to transport the load
The maximum weight allowed to be transported by a vehicle

Gross Vehicle Weight Rating (GVWR) is the value specified by the manufacturer as the loaded weight of a single vehicle.

7. A cargo cover that flaps while you are driving:
Is acceptable.
Allows air to keep the cargo cool.
Can tear away.
Can attract birds.

If cargo is covered, the cover should not flap in the wind in transit. The cover could tear loose, uncovering the cargo while potentially blocking your view or the view of others.

8. When backing a truck, you should:
Only use the side mirrors on the driver’s side.
Use both side mirrors.
Not use a helper.
Only use the mirror on the passenger's side.

To remain aware of hazards behind your vehicle when backing, you should frequently check your mirrors on both sides of the vehicle. Have a helper watch your blind spots whenever possible.

9. If a traffic light has been green for a long time:
It will probably stay green as you approach.
It is likely broken.
It is likely that the light will soon change to yellow.
It is likely the light will skip yellow and change from green to red.

If you are approaching a traffic light that has been green for a long time, there is a good chance that it will turn yellow before you reach it. Start slowing down and be ready to stop.

10. When nearing a construction worker who is close to the road, you should:
Increase your speed.
Decrease your speed.
Not drive in any lane.
Wait until the construction is complete before proceeding.

When driving through work zones, you should make a particular point of reducing your speed when workers are on or near the road.

11. In a convex mirror, objects seem ____ than they actually are.
Larger
Smaller
Closer

A convex mirror makes objects seem smaller and farther away than they actually are.

12. During a basic vehicle control skills test, you may be asked to:
Parallel park.
Inspect your tires.
Monitor your gauges.
Pull forward into a parking space.

Maneuvers that may be included in the basic vehicle control skills test include straight line backing, offset back/right parking, offset back/left parking, driver side parallel parking, conventional parallel parking, and alley docking.

13. ____ is a thin layer of ice that forms on road surfaces.
White ice
Black ice
Green ice
Blue ice

Black ice is a layer of ice that is thin and clear enough for the road to be visible through it. This makes the road look as if it is merely wet.

14. When starting the engine as part of the pre-trip inspection, the driver should:
Listen for unusual noises.
Rev the engine.
Turn up the radio.
Turn on the heater.

Check your engine during the pre-trip inspection. After starting the engine, you should listen for unusual noises.

15. The maximum speed limit in a residential area, unless otherwise posted, is:
15 mph.
25 mph.
35 mph.
45 mph.

Unless otherwise posted, the maximum speed limit in residential or business areas in West Virginia is 25 mph. If another maximum speed limit is posted, follow the posted limit.

16. Failing to exit your vehicle properly during an exercise in the basic vehicle control skills test will result in:
Failure of only that exercise.
A reset of that exercise.
Automatic failure of the basic vehicle control skills test.
An extra point against your score.

When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic control skills test.

17. A vehicle equipped with an Anti-Lock Braking System (ABS) uses a ____ light to warn that the system is not working properly.
Green
Yellow
Orange
White

Anti-Lock Braking System (ABS) malfunction lamps are usually yellow. Even if the ABS isn't working properly, a driver will still have access to the vehicle's usual braking functions.

18. When performing a pre-trip inspection, you should make sure that:
The pedal surface has been smoothed out.
The gas pedal sticks.
Nothing is obstrucing the pedals.
There is something underneath the brake pedal.

When checking your vehicle's pedals during a pre-trip inspection, you should ensure that there is nothing under or around the pedals that will obstruct their use. Make sure the pedals are in proper working condition and that the surfaces of the pedals are grooved, if applicable.

19. While operating a CMV:
You are not required to wear a safety belt.
You are only required to wear a safety belt if your vehicle does not have airbags.
You are required to wear a safety belt, but only if hauling more than 1,000 pounds of cargo.
You are always required to wear a safety belt.

A safety belt is your best defense in the event of a collision. You must always wear a safety belt while operating a CMV.

20. What should be used to check for proper tire inflation?
A tire gauge
A tire iron
An air compressor
A lug nut

During the vehicle inspection test, you must use a tire gauge to check for proper tire inflation. You will not receive passing credit if you simply kick the tires.

21. What is the only way to sober up after drinking?
Take a cold shower.
Exercise.
Wait.
Drink coffee.

The liver removes alcohol from the body at a fixed rate that cannot be increased through tricks like drinking coffee or taking a cold shower. The only way to sober up after drinking is to wait for the alcohol to be removed from your system.

22. To make driving at night easier, you should:
Keep your interior light turned on.
Adjust the instrument panel lights as dimly as you can while still being able to read the gauges.
Not take a nap before driving.
Use only your low beam headlights.

If the interior of your cab is too bright when you are driving at night, you may have difficulty seeing things outside. Keep the interior light off and adjust your instrument lights to the lowest possible level that still allows you to easily read the gauges.

23. Tires of mismatched sizes:
Can be used only on a front axle.
Can be used only on a trailer's axles.
Should be corrected before driving.
Improve fuel economy.

Tires on the same vehicle should all be equally sized. Ensure your tires are not mismatched when inspecting your vehicle.

24. When inspecting your vehicle, which of the following should not cause concern?
Exhaust system parts rubbing against fuel system parts
Exhaust system parts that are leaking
Missing mounting brackets
Exhaust system parts made of aluminum

Problems to check for when inspecting a vehicle's exhaust system include loose, broken, or missing exhaust pipes, mufflers, tailpipes, or vertical stacks; loose, broken, or missing mounting brackets, clamps, bolts, or nuts; exhaust system parts rubbing against fuel system parts, tires, or other moving parts of the vehicle; and exhaust system parts that are leaking.

25. During the on-road driving test, you must do all of the following, except:
Wear your safety belt.
Obey all traffic laws.
Complete the test without a moving violation.
Obey all traffic signs and signals, but only if other traffic is present.

You must drive in a safe and responsible manner during the on-road driving test. This includes wearing your safety belt; obeying all traffic signs, signals, and laws; and completing the test without an accident or moving violation.

26. Blocking a load:
Is dangerous and should never be done.
Helps stabilize the load.
Is only done with liquids.
Can only be done in dry weather.

Cargo should be blocked to prevent it from sliding around in transit. The shifting of weight in transit can make steering and handling difficult for the driver.

27. A suspension system:
Has a weight capacity rating.
Uses pressurized water to support the load.
Can handle any weight load.
Has a minimum weight rating.

Suspension systems receive weight capacity ratings, given by the manufacturers.

28. When parked on the side of a road, you should:
Activate your emergency flashers.
Turn off all lights.
Open the driver’s side door.
Stand in the roadway and wave your arms.

If you must stop on the side of the road, you should turn on your emergency flashers to alert other road users. This is particularly important at night.

29. When checking its automatic transmission fluid, the vehicle:
Should be placed on an incline.
Should be placed on a decline.
May have to be running.
Should be lifted with a jack.

Your vehicle's engine may need to be running in order for you to check the level of its automatic transmission fluid.

30. When driving:
You should always drive at the posted speed limit.
You should always drive slightly below the posted speed limit.
You should adjust your speed according to conditions.
You should drive as fast as possible.

Operators driving too fast is a major cause of fatal crashes. You must continually adjust your speed to a rate that is safe for road and traffic conditions.

31. When making tight maneuvers, you should:
Open your door for a better look.
Use your mirrors.
Flash your headlights.
Open the cargo door.

Mirror checks should be a normal part of your scanning routine. It is particularly important to make frequent mirror checks when driving in close quarters.

32. How can a person check for a leak in hydraulic brakes?
Pump the brake pedal three times and hold the pedal for five seconds. If the pedal moves, there may be a problem.
Push the brake pedal down as far as possible and let go. If the brake pedal returns to its normal position, there may be a problem.
Push the brake pedal down as far as possible and let go. If the brake makes a squeak, there may be a problem.
Remove the rear wheel and listen for a noise when the brake pedal is depressed.

Check hydraulic brakes by pumping the brake pedal three times before applying firm pressure to the pedal for five seconds. The pedal should not move. If it does, there may be a leak or some other problem in the braking system.

33. Which of the following is acceptable?
Dual tires that do not come into contact with each other
Tires of mismatched sizes if used only on short trips
Retreaded tires on the front of a school bus
Tires with cracks

When inspecting a vehicle, you should ensure that dual tires do not come into contact with each other or with other parts of the vehicle. Tire sizes should not be mismatched, and tires should not be cut or damaged in any way. Regrooved, recapped, or retreaded tires are not permitted to be used on the front wheels of a bus.

34. How many points must be on your record for your driving privileges to be suspended?
10
12
18
21

Certain offenses committed while driving will count against a driver in West Virginia's system of suspending driver licenses. If a driver accrues 12 points or more, their license will be suspended.

35. If coolant has to be added to a system without a recovery tank, you should:
Keep the vehicle running while adding coolant.
Open the radiator cap quickly.
Not use gloves to touch the radiator cap.
Wait for the engine to cool before adding coolant.

Before adding coolant to a system without a recovery or overflow tank, you must turn the engine off and wait until it cools. Use gloves or a thick cloth to protect your hands. To release the pressure seal, turn the radiator cap slowly to the first stop.

Your Progress
  • 0Incorrect (7 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35