Washington CDL DMV Endorsement Passenger 1

Parking brakes should be used whenever you park. If necessary, chock your wheels.

When inspecting the interior of a bus, you must make sure everything is safe and in proper working condition. Take the time to ensure that each handhold and railing is securely in place and safe to be used.

When approaching a railroad crossing, bus drivers should stop their vehicle between 15 and 50 feet from the nearest track and look both ways for a train. The driver should not proceed until they are certain no trains are approaching.

Swerving out of the way of a hazard is sometimes safer than trying to stop before reaching the hazard. You can usually turn away from something more quickly than you can come to a complete stop.

The first step of a vehicle inspection is to review the last vehicle inspection report. Only sign the report if noted defects are certified to have been repaired.

During a pre-trip inspection, you should verify that the air pressure is neither too low nor too high in any of your tires.

When inspecting the interior of a bus, you must make sure everything is safe and in proper working condition. Make sure emergency exits are properly marked and easy to use.

Because they are exposed to less sunlight and warm up more slowly, shaded areas will remain icy and slippery after ice on other areas of the road has melted.

An Anti-Lock Braking System (ABS) intervenes to reduce brake pressure if there is a risk of wheel lockup. If the ABS isn't working, the vehicle's basic braking functions are not affected. A driver should continue to drive and brake in a normal manner.

When driving a bus, you should be mindful of the size of the gap that your vehicle will need to merge into traffic after making a stop. Wait for a gap of the necessary size to open in passing traffic before re-entering the main road.

Radial and bias-ply tires should not be used together. All wheels on a vehicle should be the same style and equally-sized.

The securement of cargo must be checked within the first 50 miles of a trip, and then again every three hours or 150 miles.

On a bus, it is acceptable to lock some roof hatches in a partially-opened position to provide fresh air, but this should not be made a regular practice. Remember that opening these hatches will slightly increase a bus's clearance.

If you are not sure which method to use when putting out a fire, do not attempt to extinguish the fire on your own. Instead, wait for firefighters to arrive and let them handle it. This is especially true if you are experiencing a hazardous materials fire.

When involved in an accident, you should protect the area, notify authorities, care for the injured, collect required information, and report the accident. You can lose your license for leaving the scene of an accident.

Strong winds can make it difficult to keep a vehicle in its proper lane. Strong wind can be a particular problem when a vehicle is being driven out of a tunnel.

The risk of hydroplaning begins when water has collected on the surface of a road.

However you choose to deal with a brake failure on a downhill slope, it is important that you make your decision as quickly as possible. The longer you wait to act, the faster your vehicle will be moving, and the harder it will become to stop.

When inspecting a tractor/trailer coupling, look into the fifth wheel gap and make sure the locking jaws are fully closed around the kingpin.

If you find yourself being tailgated by another driver, you should increase your following distance and avoid making quick moves. Increasing your speed may only result in the other driver continuing to tailgate you at a higher speed. Do not turn on your taillights or flash your brake lights at the other driver.