Washington CDL DMV Endorsement Hazmat 1
Take 10 practice tests for CDL is the best way to prepare for your Washington DMV exam is by taking our free practice tests. The following question are from real Washington DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
If you are experiencing a truck fire, you should not attempt to open trailer doors without first feeling the doors to see if they are hot. If the doors are hot, there may be a cargo fire. Leave the doors closed if there is a cargo fire.
In general, vehicles carrying hazardous materials are required to display diamond-shaped warning signs on all four sides. These warning signs are called "placards."
You should use a floor lining when transporting Division 1.1, 1.2, or 1.3 materials. The floors must be tight and the liner must be made from either non-metallic material or non-ferrous metal. Non-ferrous metals are any metals that do not contain iron or iron alloys.
A hazardous material will be placed into one of nine classes to explain the type of risks associated with the material.
If you discover a cargo leak while transporting hazardous materials, use the shipping papers, label, or package location to identify which materials are involved. Do not try to touch or smell the leaking materials to determine what they are because doing so could result in injury or death.
Many hazardous materials classified as poisonous are also flammable.
A material's ID number must appear on its accompanying shipping paper as well as on its packaging. It also must appear on cargo tanks and other bulk packaging.
If transporting chlorine in cargo tanks, a driver must have an approved gas mask in their vehicle.
Always load hazardous materials away from heat sources. Be aware of regulations on explosive or flammable materials that prohibit them from being loaded in cargo spaces with heaters.
A person attending a placarded vehicle must be awake inside the vehicle or otherwise within 100 feet of the vehicle; know the hazards associated with the materials; know what to do in an emergency; and be able and authorized to move the tank if necessary.
If loading by hand, load breakable containers of corrosive liquid one by one. Keep them facing upright. Do not drop or roll the containers.
When experiencing a cargo fire, it may be a bad idea to open the doors to the trailer. Doing so allows oxygen to enter the area, potentially causing the fire to flare up and expand.
Packages that contain liquid containers must have orientation markers. Arrows displayed on the box should be pointing in the correct upright direction.
All drivers must be trained in the security risks of hazardous materials transportation. This training must include how to recognize and respond to possible security threats. Hazardous materials employees must be trained and tested at least once every three years.
It is a driver's responsibility to refuse packages or shipments of hazardous materials if they contain leaks.
If a shipping paper describes both hazardous and non-hazardous materials, the hazardous materials must be distinguished in one of three ways. They must be entered first on the shipping paper, highlighted in a contrasting color, or properly marked with an "X" in a column titled "HM."
Unless your engine runs a pump for product transfer, turn it off when loading or unloading a compressed gas tank. If you do use your engine to run a pump, you should turn the engine off after the product transfer but before unhooking the hoses.
Hazardous materials warning placards are usually diamond-shaped.
Radiation will surround each package of radioactive materials and pass through to all nearby packages. The number of packages that can be loaded together is controlled.
The shipper of hazardous materials is responsible for packaging, marking, and labeling the materials. They must supply the warning placards.
To determine which placards need to be used, you must know the hazard class of the materials being shipped, the amount of hazardous materials being shipped, and the total weight of all hazardous materials in your vehicle.
Hazardous materials warning placards are diamond-shaped.
The power unit of a placarded vehicle must be equipped with a fire extinguisher with an Underwriters Laboratories (UL) rating of 10 B:C or more.
Containers of hazardous materials should be braced so they will not fall, slide, or bounce around during transportation.
If the words "Inhalation Hazard" appear on the shipping paper or package, you must display the "Poison Inhalation Hazard" or "Poison Gas" placards, as appropriate.
One clue that a shipment may contain hazardous materials is that the shipper is in a line of business that involves such materials. Examples include paint dealers; chemical suppliers; scientific supply houses; pest control businesses; agricultural supply firms; and dealers in explosives, munitions, or fireworks.
When carrying Division 1.1, 1.2, or 1.3 explosives, you should not park within 300 feet of a bridge, tunnel, or building, unless you are parking for a short period of time while performing an operational necessity, like refueling.
If your vehicle breaks down while you are transporting explosives and you need to use warning signals, use reflective triangles or red electric lights. Never use burning signals, such as flares or fuses, when transporting explosives.
On a compressed gas tank, liquid discharge valves must always be kept closed, except during loading and unloading.
While the manual includes all of the information required to pass the hazardous materials knowledge test, you should consider reading the manual as only the first step to learning about the topic. You can learn more by reading and understanding the federal and state rules about the transportation of hazardous materials, as well as by attending hazardous materials training courses.
Try more CDL Washington Practice Test
- 0Incorrect (6 allowed to pass)
- 0Correct