Virginia CDL DMV Endorsement Hazmat 2

If transporting chlorine in cargo tanks, a driver must have an approved gas mask in their vehicle.

To drive a vehicle of any size that is used to transport hazardous materials, you must have a CDL with a hazardous materials endorsement.

The shipper of hazardous materials is responsible for packaging, marking, and labeling the materials properly. It is a good idea for the driver to ensure the materials are properly labeled.

Some radioactive materials are required to be accompanied by a transport index. A transport index is a number that indicates how much control the material will require during transport. The total transport index of all cargo in a single vehicle may not exceed 50.

If you need to refuel a vehicle carrying hazardous materials, you must first turn off the engine. While refueling, someone must be at the nozzle and controlling the fuel flow at all times.

A person attending a parked placarded vehicle must be either awake inside the vehicle or they must be within 100 feet of it. If not inside the vehicle itself, the person must have a clear view of the vehicle. The person attending may not be inside the sleeper berth.

Packaging can be an indicator of whether or not materials are hazardous. Cylinders and drums are often used to hold and transport hazardous materials.

A vehicle that has not been properly placarded may not be driven, except when necessary to protect life or property in an emergency.

If the words "Inhalation Hazard" are on a package or its shipping paper, you must display the proper inhalation hazard placards, as well as any other necessary placards. This applies regardless of the amount of materials being carried.

To determine which placards need to be used, you must know the hazard class of the materials being shipped, the amount of hazardous materials being shipped, and the total weight of all hazardous materials in your vehicle.

The shipper of hazardous materials is responsible for packaging, marking, and labeling the materials properly. It is a good idea for the driver to ensure the materials are properly labeled.

Fighting a hazardous materials fire requires special training and protective gear. Unless you have the proper equipment and training, do not try to fight a hazardous materials fire yourself.

It is a driver's responsibility to refuse packages or shipments of hazardous materials if they contain leaks.

Keep liquid discharge valves on a compressed gas tank closed except when loading and unloading.

The shipper of hazardous materials is responsible for correctly labeling and marking them. The driver should make sure that the shipper properly labeled and marked the materials before beginning a trip.

If loading by hand, load breakable containers of corrosive liquid one by one. Keep them facing upright. Do not drop or roll the containers.

A hazardous material will be placed into one of nine classes to explain the type of risks associated with the material.

When carrying Division 1.1, 1.2, or 1.3 explosives, do not park within 300 feet of a bridge, tunnel, or building; a place where people gather; or an open fire.

Hazardous materials placards must be placed on a vehicle at least three inches away from any other markings and must positioned so that the words or numbers are level and read from left to right.

The National Response Center must be notified of any incident that results in death; hospitalization; $50,000 or more in estimated property damage; an evacuation of the general public or closure of a major transportation route/facility for more then one hour; fire, breakage, spillage, or suspected contamination involving radiation, bacteria, or toxins. Additionally, if the carrier judges the situation to be so serious that it should be reported, it should be reported.

If you are experiencing a truck fire, you should not attempt to open trailer doors without first feeling the doors to see if they are hot. If the doors are hot, there may be a cargo fire. Leave the doors closed if there is a cargo fire.

On hazardous materials shipping papers, the identification number, shipping name, and hazard class must not be abbreviated, unless specifically authorized in the hazardous materials regulations.

Packages that contain liquid containers must have orientation markers. Arrows displayed on the box should be pointing in the correct upright direction.

On a compressed gas tank, liquid discharge valves must always be kept closed, except during loading and unloading.

Cylinders and drums are often used to contain hazardous materials. Be sure to take the proper precautions if transporting a cargo of hazardous materials.

Always load hazardous materials away from heat sources. Be aware of regulations on explosive or flammable materials that prohibit them from being loaded in cargo spaces with heaters.

Shipping papers must be quickly accessible in the event of an emergency. While driving, operators must keep the papers in a pouch on the driver’s door or in clear view and within immediate reach while their seat belt is fastened. Shipping papers may be kept on the driver’s seat when the driver is out of the vehicle.

Before loading or unloading a tank with flammable liquids, you should turn off the engine, unless running the engine is necessary to operate a pump. Ground the tank before opening the filling hole and maintain the ground until after closing the filling hole.

Information about hazardous chemicals is found in the Emergency Response Guide (ERG) provided by U.S. Department of Transportation (DOT). The ERG is indexed by the proper shipping names and identification numbers of substances.

Unless you must run the engine to operate a pump, you should always turn off the engine before loading or unloading flammable liquids.