Vermont MOTORCYCLE DMV Practice Test 7

When preparing to pass another vehicle on its left, you should ride in the left portion of your lane. This will increase your line of sight and make you more visible to oncoming traffic.

To be effective, eye protection and face shields must be free of scratches; be resistant to penetration; give a clear view to either side; fasten securely; permit air to pass through; and permit enough room for eyeglasses or sunglasses to be worn underneath.

If you must stop quickly while in a curve, you should first straighten and square the handlebars, then stop. If straightening your motorcycle is not possible, you should apply the brakes smoothly and gradually, reduce your lean angle, then increase the brake pressure as you slow down.

To maintain directional control through a turn, you should look through the turn by turning only your head. Slow down before turning and lean your motorcycle in the appropriate direction.

When preparing to pass on the left, you should ride in the left portion of your lane. This lane position will increase your line of sight and make your more visible to oncoming traffic.

Pre-ride motorcycle inspections are an important part of ensuring safe riding. Hydraulic fluids and coolants should be checked at least once a week.

Wearing brightly-colored clothing while riding will increase your chances of being seen. Bright oranges, yellows, reds, or greens are best and are preferable to drab or dark colors.

The added weight of a passenger in a sidecar will affect the handling of your motorcycle. Expect your motorcycle to require extra space to come to a complete stop.

If one of your tires goes flat, hold both handle grips firmly, ease off of the throttle, and maintain a straight course. If you must brake, gradually apply the brake of the tire that is not flat (if you are certain of which tire that is). As you slow down, edge to the side of the road, squeeze the clutch, and stop.

Check your brake levers individually before every ride. Make sure each one feels firm and holds the motorcycle when the brake is fully applied.

Passes must be completed within posted speed limits. Only pass where it is safe and legal to do so.

Strategies for making yourself more visible include wearing brightly-colored and reflective clothing, keeping your headlight on at all times, and varying your lane position as conditions demand.

It is possible to use both brakes while turning, but it must be done with great care. Some of the tires' usual traction is being used to make the turn while the motorcycle is leaning, so less traction is available for stopping.

To reduce the risk of fatigue on a long trip, dress to protect yourself from tiring elements, such as wind, cold, and rain. Limit yourself to no more than six hours of riding per day and take rest brakes at least every two hours. Avoid using artificial stimulants, as these only result in extreme fatigue when they wear off.

Maintaining a cushion of space on all sides of your motorcycle helps to ensure that you have time and space to react if another road user makes a mistake.

Before shifting into a lower gear, make sure you are riding slowly enough to shift safely. Downshifting while going too fast may cause the motorcycle to lurch and the rear wheel to skid. When riding downhill or shifting into first gear, you may need to use the brakes to slow to a safe speed before downshifting.

Riding between slowed or parked cars can leave you vulnerable to unexpected hazards, such as opening car doors or cars suddenly pulling into traffic. If a hazard arises, you will not have room to safely maneuver. Never travel on the shoulder of a road because other drivers will never expect you to be there.

Before every ride, be sure to check your tires' inflation pressure, your tires' treadwear, and the general condition of the sidewalls and tread surface on the tires.

Do not try to accelerate out of a wobble because doing so will only make the motorcycle more unstable. Instead, grip the handlebars firmly, slow down by gradually closing the throttle, move your weight as far forward and downward as possible, and pull off the road as soon as you can. Avoid applying the brakes, as this may also worsen the wobble.

You should select a helmet that meets U.S. Department of Transportation and state standards; fits snugly all the way around; and has no obvious defects, such as cracks, loose padding, or frayed straps.

In traffic, a motorcycle needs as much distance to stop as a car does.

If you are in the middle portion of your lane, you will have the greatest room for error if your control is disrupted by a wind blast from a passing vehicle.

Always take extra care when riding a new or unfamiliar motorcycle. Most crashes involve riders who have had less than six months of experience with the motorcycle that they are using.

Because you need adequate traction to swerve safely, you should not brake and swerve at the same time. Instead, if you approach a hazard that requires you to brake and swerve, you should perform one action and then the other.

Under normal conditions, you should maintain a following distance of at least two seconds. Increase your following distance any time conditions are less than perfect.