Over 95% pass rate when practice at DMV Practice Test

Vermont MOTORCYCLE DMV Practice Test 3

Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Vermont DMV exam is by taking our free practice tests. The following question are from real Vermont DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
16
Number of Question
25
Passing score
20
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. For the best protection, riding gloves should be made of:
Leather.
Wool.
Polyester.
Silk.

Gloves should be made of leather or another durable material to provide proper protection for the wearer.

2. When turning left, you should:
Press the right handgrip.
Press the left handgrip.
Press both handgrips at the same time.
Not press either handgrip.

A motorcycle must lean to make a turn. To make it lean in the appropriate direction, press the handgrip in the direction you want to turn.

3. The proper footwear for riding a motorcycle:
Has long, loose laces.
Has short heels.
Has tall heels.
Is always sneakers.

When riding, you should wear sturdy footwear that is high enough to cover and support your ankles. Short-heeled footwear is best because taller heels may catch on rough surfaces. Laces should be tucked in so that they can't be caught on anything.

4. What is the primary psychoactive component in marijuana?
THC
TMJ
MRT
AAP

The main psychoactive substance in marijuana is called tetrahydrocannabinol, or THC.

5. How do headache, cold, and hay fever medications usually affect your body?
They make you drowsy.
They make you more alert.
They make you hungry.
They make you unable to concentrate.

Most drugs taken to ease headaches, colds, hay fever, allergies, or nerves can make the consumer drowsy and may impair their ability to ride safely. When taking a medication, it is important for a rider to know how the drug affects their body before riding.

6. Reflective material on your helmet:
Helps you to be seen.
Is not allowed.
Should only be used at night.
Does not help you to be seen.

Reflective material on a vest or on the sides of your helmet can make you more visible to other drivers and should be used both day and night.

7. When approaching a blind intersection, you should:
Ride in the portion of the lane that will bring you into other drivers' fields of vision at the earliest possible moment.
Always be in the left lane to be the farthest from oncoming traffic.
Slowly sneak up to the intersection.
Weave slightly in your lane so your headlight has a better chance of being spotted.

When approaching a blind intersection, move into the part of the lane that will bring you into an oncoming driver's field of vision at the earliest possible moment. For example, when approaching a blind corner to your right, you may be seen sooner if you are in the left portion of your lane and not in the center portion.

8. Most motorcycles:
Have only a front brake.
Have only a rear brake.
Have brakes in both the front and rear.
Have three brakes: one in the front, one in the rear, and an emergency brake.

Motorcycles generally have two brakes, one for the front wheel and one for the rear wheel.

9. Clothing made of which type of material can offer the best protection to motorcyclists?
Leather
Wool
Polyester
Silk

Leather garments can provide the greatest level of protection to motorcyclists. It is important to wear clothing that covers your legs and arms entirely when riding a motorcycle.

10. When you have mounted your motorcycle, you should do all of the following, except:
Make sure the mirrors are clean.
Make sure the horn works.
Close the fuel supply valve.
Make sure the clutch works smoothly.

After mounting your motorcycle, you should make sure the clutch, throttle, horn, and brakes all work properly. Clean and adjust the mirrors and make sure that the fuel supply valve is open.

11. How can you discourage another vehicle from sharing your lane?
Ride in the middle of your lane.
Ride in the left portion of your lane.
Ride in the right portion of your lane.
Swerve from side to side in your lane.

To discourage automobile drivers from trying to share your lane, ride in the center portion of the lane.

12. Maximum front-line braking is accomplished by:
Using the rear brake only.
Using the front brake only.
Using both brakes.
Using the rear brake while downshifting.

Maximum straight-line braking is accomplished by fully applying both the front and rear brakes without locking either wheel. You should always use both brakes every time you slow or stop.

13. If you are being chased by a dog, you should:
Kick it away.
Stop until the animal loses interest.
Swerve around the animal.
Approach the animal slowly, then speed up.

Motorcycles often seem to attract dogs. If you are being chased by a dog, downshift and approach it slowly. Then, as you approach the dog, accelerate and leave it behind.

14. As an operator, you should prepare a passenger to ride by instructing them to do each of the following, except:
Get on the motorcycle after the engine has been started.
Sit as far forward as possible.
Maintain a large space between themselves and you.
Keep their legs away from the muffler and chains.

Before beginning a ride, you should ask your passenger to mount the motorcycle only after the engine has been started. They should sit as far forward as they can without crowding you and hold onto the motorcycle's passenger handholds or onto your waist, hips, or belt. They should keep their legs away from the muffler, chains, and other moving parts.

15. Taking corners too fast:
Can cause the rider to go into another lane.
Is better than going too slowly.
Often causes the rider to stay in their lane.
Is acceptable because motorcycles are smaller than other types of vehicles.

Taking a corner too fast may cause you to cross into another lane or go off the road. Be sure to decelerate before beginning to take a turn or curve.

16. A passenger on a motorcycle should:
Mount the motorcycle before the engine starts.
Mount the motorcycle after the engine starts.
Sit as close to the rear of the motorcycle as possible.
Hold onto the seat.

Passengers should get on a motorcycle only after the engine has been started and the transmission is put in neutral. They should sit as far forward as possible without hindering the operator's control of the motorcycle and should hold onto the operator's waist, hips, or belt.

17. When choosing a lane position, you should consider:
Whether or not other drivers will see you.
How many cars are on the road ahead.
Which portion of the lane will result in a shorter trip.
If you can pass more vehicles in a certain position than in another.

While a properly chosen lane position can offer several advantages, you should be certain that your lane position will allow you to be seen by others and have an adequate space cushion.

18. When approaching an object or uneven surface that you cannot avoid, you should:
Make sure the motorcycle is leaning to one side.
Speed up.
Swerve quickly.
Rise slightly off the seat to allow your legs to absorb the shock.

If you cannot avoid riding over an obstacle or uneven surface, you should approach it at as close to a 90-degree angle as possible. Slow down as much as you can, make sure that your motorcycle is upright, and rise slightly off your seat so your knees can absorb some of the force of impact. Just before contact, roll on the throttle slightly to lighten the front end.

19. The two most common types of motorcycle helmets are:
Quarter and three-quarter.
Quarter and half.
Half and full-face.
Three-quarter and full-face.

The two primary types of helmets are three-quarter and full-face. A full-face helmet can provide the best possible protection to a rider.

20. To carry a passenger, you may need to adjust all of the following, except:
Tire pressure.
Mirror positions.
Headlight position.
Brake light position.

A motorcycle carrying a passenger will sit differently than usual due to the additional weight. You may need to adjust the tire pressure, suspension, shocks, headlight, and mirrors to compensate for the shift.

21. Maintain an adequate following distance behind other vehicles:
To allow you time and space to identify and react to hazards.
So you can tailgate.
To allow for traffic counters to accurately count you as a vehicle.
To encourage other drivers to cut you off.

Maintaining an adequate following distance ensures that you will have enough space to stop or swerve out of the way if the vehicle ahead of you stops suddenly. A space cushion also provides you with a better view of any hazards on the road surface, such as potholes.

22. When it is obvious that you are going to turn, you:
Do not need to use a turn signal.
Should still use a turn signal.
Only need to use a turn signal if there are nearby pedestrians.
Only need to use a turn signal if you are at a stop light.

You must use proper turn signals every time you turn or change lanes, even if you think your intentions are obvious. Signals are always important, even if no one else seems to be around to see them. There may be other vehicles nearby that you can't see or haven't yet noticed.

23. In general, riders should:
Pick one lane position and always use it.
Change lane positions frequently to prevent monotony.
Choose a lane position that maximizes their space cushion.
Never use the center lane position.

Because road and traffic conditions are always changing, the safest lane position is also always changing. Choose the position that will maximize your space cushion and allow other drivers to see you most easily.

24. When riding on a slippery surface, you should:
Increase your speed.
Make sudden moves.
Move to the edge of the road.
Ride in the tire tracks left by cars.

Strategies for safe riding on slippery surfaces include reducing your speed, avoiding sudden moves, staying away from the edge of the road, and riding in the tire tracks left by other cars.

25. The gearshift lever is operated by:
Your right hand.
Your right foot.
Your left hand.
Your left foot.

The gearshift lever of a motorcycle is located in front of the left footrest and is operated by the rider's left foot.

Your Progress
  • 0Incorrect (5 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25