Vermont MOTORCYCLE DMV Practice Test 16
Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Vermont DMV exam is by taking our free practice tests. The following question are from real Vermont DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
When riding at night, you should reduce your speed and increase your following distance. Use your high beam headlight whenever you are riding where there is no other traffic. Always be prepared to adjust your lane position to react to changing conditions.
Trying to enter a curve or turn at a speed that is too fast for conditions may cause you to cross into another lane of traffic or leave the road entirely.
To prevent any dangerous situations caused by technical issues, you should perform a thorough inspection of your motorcycle before every ride. Compared to a car, small technical problems can have more serious consequences on a motorcycle.
Make sure that you are aware of the locations of all your motorcycle's controls before beginning to ride. The horn button on a motorcycle is usually located next to the left handgrip.
A passenger should lean with the operator through turns and curves. They should sit as far forward as possible, without hindering the operator's control of the motorcycle, and hold onto passenger handholds or the operator's waist, hips, or belt.
The centermost portion of a lane is where debris and oil drippings from cars often collect. Other hazards, such as utility hole covers, can also be found in the centermost portion of the lane.
Motorcycle headlights are generally smaller and less powerful than those of cars.
If you can’t avoid a dangerously slippery surface, you should keep your motorcycle upright and proceed over the surface as slowly as possible.
When being passed, the center portion of the lane is generally the safest lane position for a motorcyclist. Riding on the side nearest the passing vehicle increases the risk of colliding with it. Riding on the side farthest from the passing vehicle can also be dangerous because it may prompt the driver to return to your lane before it is safe to do so.
If your drive chain or belt fails, you will experience an immediate loss of power to the rear wheel.
The best way to handle a tailgater is to get them in front of you. If you can do so safely, change lanes and let them pass. Speeding up may only increase the danger by causing them to continue tailgating you at a higher speed.
To reduce the danger of fatigue when riding, dress to protect yourself against tiring weather conditions, such as wind and rain. Limit yourself to no more than about six hours of riding per day and stop for a break at least once every two hours. Avoid taking artificial stimulants since you may experience extreme fatigue when they start to wear off.
A linked braking system connects the front and rear brakes on a motorcycle. This system applies braking pressure to both brakes when either the front or rear lever is used. Check your owner's manual for a detailed explanation of the braking system on your motorcycle.
The surest way to avoid the risks of riding under the influence of alcohol is to not ride after you have been drinking. Any amount of alcohol can impair your abilities.
Proper clothing for riding can help protect you from injury in the event of a collision. It can also protect against routine hazards and discomforts, such as hot or cold weather.
It is particularly important for a rider to check their mirrors when slowing down or stopping, when stopped at an intersection, when changing lanes, and when turning.
Choosing a brightly-colored helmet is recommended. Not only will the helmet protect you in the case of a crash, but the bright color of the helmet will help other road users see you.
To protect yourself against injury, you should wear a DOT-compliant helmet; face or eye protection; a jacket and long pants made of sturdy material; boots or shoes that are high and sturdy enough to cover and support your ankles; and gloves made of durable material.
A properly chosen lane position should provide a number of benefits, including an increased ability to see others and to be seen. It should help you avoid wind blasts, other drivers' blind spots, and surface hazards. Your lane position should discourage other drivers from trying to share your lane and provide you with an escape route, should a hazard arise. Choose a lane position that maximizes your space cushion.
To reduce the risk of fatigue on a long trip, dress to protect yourself from tiring elements, such as wind, cold, and rain. Limit yourself to no more than six hours of riding per day and take rest brakes at least every two hours. Avoid using artificial stimulants, as these only result in extreme fatigue when they wear off.
You should clean and adjust both mirrors before starting your motorcycle. Adjust your mirrors so you can see the lane behind you and as much as possible of the lane next to you.
Most motorcycle crashes happen on trips shorter than five miles, just a few minutes after the rider starts out.
Shift down through the gears with the clutch as you slow or stop. Remain in first gear while you are stopped so you can move quickly if needed.
Always look through a turn to where you want to go. Turn only your head to look, not your shoulders, and keep your eyes level with the horizon.
When riding, you should sit far enough forward that your arms will be slightly bent when holding the handle grips. This will permit you to easily and comfortably reach and operate the controls.
- 0Incorrect (5 allowed to pass)
- 0Correct