Vermont MOTORCYCLE DMV Practice Test 14

Oily drippings from cars collect in a strip in the center of a traffic lane. Unless the road is wet, this area will generally still provide enough traction for motorcyclists to ride safely. Because the strip is usually no more than two feet wide, it is often possible to ride to one side of the strip and still be in the center portion of the lane.

While riding in a staggered formation is generally the best option when traveling in a group, riders should move into a single-file line through curves, through turns, and when entering or exiting a highway.

Most motorcycles have a manual transmission. Downshifting to a lower gear will slow you down.

When being passed, motorcyclists should be careful not to be hit by any part of the passing vehicle, including its mirrors. In addition to the vehicle itself, motorcyclists should be aware of wind gusts coming from the passing vehicle and potential objects being thrown by a passenger in the vehicle who may not be paying attention to the road.

It is important to do a thorough inspection of your motorcycle before every ride. This will usually take you only a few minutes.

The greatest potential for conflict between your motorcycle and other traffic is at intersections. Be extra alert when riding somewhere where another vehicle may cross in front of your path of travel.

Before every ride, you should complete a thorough check of your motorcycle. Be sure to check the rims and spokes to make sure none are bent, loose, or damaged; the condition and tread of the tires; and all of the lights.

Passes must be completed within posted speed limits. Only pass where it is safe and legal to do so.

A properly chosen lane position should provide a number of benefits, including an increased ability to see others and to be seen. It should help you avoid wind blasts, other drivers' blind spots, and surface hazards. Your lane position should discourage other drivers from trying to share your lane and provide you with an escape route, should a hazard arise.

You are especially vulnerable as a motorcyclist, so it is very important to use your turn signals to alert others to your intentions. Always use them any time that you plan to change lanes or turn, even if you don't think anyone else is nearby.

The best way to deal with a tailgater is to let them get in front of you. If you can do so safely, change lanes and let the tailgater pass. Riding faster may only increase the danger by prompting them to continue tailgating you at the higher speed.

Most motorcycle crashes happen on trips that are shorter than five miles in length at speeds slower than 30 mph.

A sidecar is essentially an unpowered mass attached to the side of your motorcycle. Due to its inertia, it will feel like it is lagging behind when you accelerate.

Adjust your mirrors so you can see the lane behind you and as much as possible of the lane next to you. When properly adjusted, a mirror may show the edge of your arm or shoulder, but it’s the road behind you and to the side of you that is most important.

In a group of motorcyclists, riders with less experience should be positioned toward the front of the group, just behind the leader. This will allow more experienced riders behind them to keep an eye on them.

Wear reflective materials to increase your visibility, especially when riding at night. Brightly-colored clothing with reflective materials will make you more visible to other road users.

While riding in a staggered formation is usually best for a group of two-wheeled motorcycles, three-wheeled motorcycles are too wide to allow this formation. A group of riders on three-wheeled motorcycles should travel in a single-file line.

Brightly-colored and/or reflective clothing will increase your chances of being seen under any conditions. Remember that most motorcycle crashes happen in broad daylight so it is still best to wear bright clothing during the day.

Instead of or in addition to mechanical turn signals, operators may use hand signals to indicate turns or stops. If an operator's left arm is bent at the elbow and pointing downward, it means the operator plans to slow down or stop.

Leather garments can provide the greatest level of protection to motorcyclists. It is important to wear clothing that covers your legs and arms entirely when riding a motorcycle.

You should avoid riding if you are tired. When making a long trip, take rest breaks at least every two hours to reduce the risk of becoming fatigued.

Maintaining a cushion of space between your motorcycle and other vehicles on the road will give you a clearer view of any emerging hazards, more time to react to hazards, and more space to maneuver around them.

To reduce the risk of injury, riders should wear a helmet, eye protection, heavy shoes or boots, full-length pants, a jacket, and full-fingered gloves. Clothing should be made of durable materials to best protect the wearer.

To be effective, eye protection and face shields must be free of scratches; be resistant to penetration; give a clear view to either side; fasten securely; permit air to pass through; and permit enough room for eyeglasses or sunglasses to be worn underneath.

Many drugs, including prescription and over-the-counter medications, can impair your ability to ride safely. Some medications become even more dangerous when combined with alcohol.