Over 95% pass rate when practice at DMV Practice Test

South Dakota MOTORCYCLE DMV Practice Test 4

Take 16 practice tests for MOTORCYCLE is the best way to prepare for your South Dakota DMV exam is by taking our free practice tests. The following question are from real South Dakota DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
16
Number of Question
25
Passing score
20
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. When you must brake and swerve to avoid a hazard, you should:
Perform both actions at the same time.
Only brake.
Perform one action, then the other.

If you must both swerve and brake to avoid a hazard, you should separate the actions. Brake then swerve, or swerve then brake, but do not perform both actions at the same time.

2. Under normal conditions, maintain a minimum following distance of:
Two seconds.
Three seconds.
Four seconds.

It is recommended that new motorcycle riders maintain a minimum following distance of four seconds when riding under ideal conditions. Riders should increase their following distance any time conditions are less than perfect.

3. The best way to stop quickly is to:
Use the front brake only.
Use the rear brake before the front brake.
Use both brakes.

Always use the front and rear brakes the same time when making a quick stop.

4. How high can handlebars be positioned?
At or higher than shoulder height of the person riding
At or higher than the waist of the person riding
At or lower than the shoulder height of the person riding

It is prohibited for a person to operate a motorcycle if the handlebars are at or above the height of their shoulders.

5. When turning, you should:
Turn your head and shoulders to look through the turn.
Turn just your head, not your shoulders, to look through the turn.
Keep your knees away from the gas tank.

When turning, look through the turn to where you want to go. Turn just your head, not your shoulders, and keep your eyes level with the horizon. You should keep your knees close to the gas tank to help maintain balance.

6. How should a group of motorcyclists pass another vehicle?
In a staggered formation
In pairs
One at a time

On a two-lane road, a group of motorcyclists should pass another vehicle one at a time. Each motorcyclist should complete the pass before another begins to pass.

7. Use your mirrors when stopping at an intersection:
To determine if drivers behind you are aware that you are stopping.
To watch for pedestrians ahead.
To look for dark clouds that may indicate poor weather conditions.

It is important to consistently check vehicles approaching your motorcycle from behind to determine if drivers are paying attention to you and your movements. Use your mirrors when stopping at an intersection to make sure approaching drivers are responding appropriately to your actions.

8. If a motorcycle is towing a trailer, the motorcyclist's following distance should:
Increase.
Decrease.
Be the same as it normally would be.

A motorcyclist who is towing a trailer should increase their following distance. The added weight of the trailer means that the motorcycle will require more time to stop than it would otherwise.

9. Riding on ______ may provide poor traction.
Pavement markings
Dry pavement
The roadway under a bridge

Traction may be poor on surfaces such as wet, snowy, icy, or muddy pavement; gravel roads; lane markings; and steel plates and utility hole covers.

10. When riding a motorcycle, it is important to:
Focus only on what is in front of you.
Focus only on what is behind you.
Know what’s happening both in front of and behind you.

While it is most important to be aware of what is ahead of you on the road, you cannot ignore what is behind you. You can keep track of the situation behind you by checking your mirrors consistently.

11. When braking on a motorcycle:
The rear brake should be applied first.
The front brake should be applied first.
The front and rear brakes should be applied at the same time.

Use both brakes every time you slow down or stop. If you use only the rear brake when stopping normally, you may not develop the habit or the skill to use the front brake properly when you really need to stop quickly.

12. Your lane position should:
Allow you to blend in with traffic.
Provide an escape route.
Encourage others to use your lane.

A properly chosen lane position should provide a number of benefits, including an increased ability to see others and to be seen. It should help you avoid wind blasts, other drivers' blind spots, and surface hazards. Your lane position should discourage other drivers from trying to share your lane and provide you with an escape route, should a hazard arise.

13. What should be your first consideration when buying a motorcycle helmet?
Appearance
Protection
Price

Protection should be your first consideration when buying a motorcycle helmet. Look for a helmet that fastens securely, fits correctly, and is DOT-compliant.

14. Mirrors on motorcycles:
Have blind spots, just like cars.
Do not have blind spots.
Are not required.

The mirrors of motorcycles have blind spots, just like those of cars. Always turn your head to check your blind spot before changing lanes.

15. When traveling at night, it is:
Easier to judge distances than it is during the day.
About as easy to judge distances as it is during the day.
More difficult to judge distances than it is during the day.

It is almost always more difficult to judge distances when traveling in the dark than it is when traveling in daylight. Shadows and light contrasts are important cues to the distance of an object. When you must rely on artificial lighting to see the roadway at night, natural contrasts and shadows may be distorted or entirely absent.

16. How can you tell if a helmet is DOT-certified?
It will have a label attached to the helmet stating the certification.
DOT-certified helmets are the only type of helmet sold in North America.
It will have a green dot on the inside of the helmet.

A U.S. Department of Transportation (DOT)-compliant motorcycle helmet will have an attached label stating the manufacturer’s name and the model of the helmet.

17. If you will be carrying a passenger on your motorcycle, you will likely have to:
Reduce the tire pressure.
Make no tire pressure adjustments.
Increase the tire pressure.

Because a passenger will place additional weight on your motorcycle, you will probably need to add a few pounds of pressure to your tires before riding. Check your owner's manual for details regarding the appropriate pressure settings to use.

18. When the lights on this sign are flashing, what should you do?
Stop and wait until the train passes.
Proceed with caution.
Turn around and find an alternate route.

When approaching a railroad crossing that is controlled by a sign with flashing lights, you must come to a complete stop and wait until the train has passed and the lights have stopped flashing before proceeding. Never try to outdrive a train.

19. Eye protection:
Is not necessary if your motorcycle is equipped with a windshield.
Is only necessary when riding in bad weather.
Should allow the rider a clear view to either side.

Proper face/eye protection is required by law in the state of California. A face shield can protect your whole face in the event of a collision. An effective eye or face shield must allow the rider a clear view to either side.

20. When riding with a passenger on your motorcycle, you should instruct the passenger to:
Get on the motorcycle before the engine starts.
Sit as far back as possible on the bike.
Not talk or move unnecessarily.

Tell passengers to avoid unnecessary conversation or movement while on a moving motorcycle. Passengers should get onto a motorcycle only after the engine is started. They should sit as far forward as possible without crowding the operator.

21. When attempting to pass another vehicle, you should:
Ride within the posted speed limits.
Exceed the posted speed limit to complete the pass, but not by more than 10 mph.
Pass more than one vehicle at a time.

All passes must be completed within legal speed limits. Riders should pass only where it is safe and legal to do so.

22. It is illegal to operate a motorcycle with a minimum blood alcohol content (BAC) of:
0.08 percent.
0.1 percent.
0.3 percent.

In California, it is illegal for a person age 21 or older to operate a motorcycle with a blood alcohol content (BAC) of 0.08 percent or higher. For a person under the age of 21, it is illegal to operate a motorcycle with a BAC of 0.01 percent or higher. It may be unsafe to operate a motorcycle even if you are under the legal limit.

23. A sign that your rear tire has suddenly gone flat is that:
The back of your motorcycle is swaying from side to side.
You heard a loud noise.
A discharge of air can be seen.

If the rear tire of a motorcycle goes flat, the back of the motorcycle may jerk or sway from side to side. If you experience this movement when riding your motorcycle, you should stop riding and check your tires as soon as possible.

24. Motorcycles may pass on the right:
If there is at least eight feet of unobstructed pavement.
By riding on the shoulder of the road.
By riding on the grass, if it is level.

Motorcyclists may pass on the right if there is unobstructed pavement with a width of at least eight feet to the right of the vehicle being passed. Motorcyclists, and other drivers, should never leave the road to pass another vehicle.

25. When riding, jackets and pants should:
Fit loosely enough to allow the wind to catch the fabric.
Be snug enough to keep from flapping in the wind.
Be tight enough to prevent you from moving freely.

Jackets and pants should fit snugly enough that they do not flap in the wind, but also loosely enough that you are able to move freely.

Your Progress
  • 0Incorrect (5 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25