South Carolina MOTORCYCLE DMV Practice Test 14
Take 16 practice tests for MOTORCYCLE is the best way to prepare for your South Carolina DMV exam is by taking our free practice tests. The following question are from real South Carolina DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
When being passed, the center portion of the lane is generally the safest lane position for a motorcyclist. Riding on the side nearest the passing vehicle increases the risk of colliding with it. Riding on the side farthest from the passing vehicle can also be dangerous because it may prompt the driver to return to your lane before it is safe to do so.
If your motorcycle begins to weave while riding over uneven rain grooves or bridge gratings, simply relax and proceed straight across the grooves at a steady speed. Steering in a zigzag pattern as you cross gratings is more dangerous than the weaving.
Use both brakes if you must make a quick stop on a slippery surface. The front brake is safe to use on a slippery surface if applied gradually to prevent locking.
The front brake should not be used when making a U-turn because it could cause the bike to tip over. Instead, use the rear brake to control the speed of the bike in the U-turn.
A helmet will provide a rider with the best protection if it meets U.S. Department of Transportation (DOT) standards; fits snugly all the way around; and has no obvious defects, such as cracks, loose padding, or frayed straps.
In general, the best way for a group of motorcyclists to maintain close ranks while still allowing each rider an adequate space cushion is to ride in a staggered formation.
Many drugs, including legal prescription and over-the-counter medications, have side effects that can impair your ability to safely operate a motorcycle. Always talk to your doctor about how a new medication may affect your driving or riding abilities.
Anticipate potential problems that can be created by factors on the roadway. Make a plan to reduce their risks.
It is necessary to shift into higher gears as your motorcycle increases its speed.
If you are being passed either from behind or by an oncoming vehicle, stay in the center portion of your lane. Riding any closer to the passing driver could place you both in a hazardous situation.
When approaching a blind intersection, move into the lane position that makes you the most visible to surrounding drivers.
A sturdy riding jacket provides essential protection in the event of a crash, no matter the weather. Jackets also provide an additional benefit in hot weather by protecting the rider against dehydration. Many motorcycling jackets are designed to prevent the wearer from overheating.
Traction may be poor on surfaces such as wet, snowy, icy, or muddy pavement; gravel roads; lane markings; and steel plates and utility hole covers.
There is no single lane position that is always best and no single lane position that should always be avoided. A responsible rider adjusts their position as conditions change.
On a slippery surface, any sudden change in speed or direction could cause a skid. Accelerate, shift gears, turn, and brake as smoothly as you can when riding on a slippery surface.
Pavement can be particularly slippery after it has just started to rain. Oil from vehicles will have not yet washed away from the surface of the road, forming a slippery mixture with the water.
Intersections present the greatest potential for conflict between a motorcycle and other vehicles. Motorcyclists should exercise caution when approaching an intersection.
When being passed, the center portion of the lane is generally the safest lane position for a motorcyclist. Riding on the side nearest the passing vehicle increases the risk of colliding with it. Riding on the side farthest from the passing vehicle can also be dangerous because it may prompt the driver to return to your lane before it is safe to do so.
To lessen the chances of a crash occurring, you should make yourself visible, communicate your intentions to others, maintain adequate space cushions, search your path of travel at least 12 seconds ahead, identify and separate hazards, and be prepared to react to changing conditions.
It is best to change gears before entering a turn. If you must change gears while in a turn, be sure to do so smoothly.
To stop quickly, apply both brakes at the same time. Scan the road ahead to help you avoid the need for last-minute stops.
This sign is displayed on the rear of slow-moving vehicles that may be moving more slowly than 25 mph, such as construction equipment, farm machinery, or horse-drawn vehicles.
To avoid becoming fatigued when riding your motorcycle on a long trip, limit how much time is spent riding each day and take frequent rest breaks. Avoid the use of artificial stimulants because you may experience extreme fatigue when they start to wear off.
If the front wheel locks up while you are braking, release the pressure from the front brake. Immediately re-apply pressure to the brake with controlled gradual pressure.
If a tire goes flat while you are riding, hold onto the handgrips firmly and concentrate on maintaining a straight course. Brake only if you are sure which tire is flat. Exit the roadway once your motorcycle has slowed considerably.
Scan the road ahead to remain alert to changing traffic conditions, hazardous road conditions, and escape routes. Be prepared to react to any changing conditions.
A properly chosen lane position should provide a number of benefits, including an increased ability to see others and to be seen. It should help you avoid wind blasts, other drivers' blind spots, and surface hazards. Your lane position should discourage other drivers from trying to share your lane and provide you with an escape route, should a hazard arise.
To remain aware of your surroundings, it is not enough to rely only on your mirrors. Motorcycles have blind spots just like any other vehicle.
It is possible to use both brakes while turning, but it must be done with great care. Some of the usual traction is being used to make the turn while the motorcycle is leaning, so less traction is available for stopping.
Passing must be completed within posted speed limits. Only pass another vehicle where it is safe and legal to do so.
- 0Incorrect (6 allowed to pass)
- 0Correct