Rhode Island MOTORCYCLE DMV Practice Test 9

Using your high beam headlight during the day increases the likelihood that other drivers will see you. Use your high beam headlight any time you are not riding behind or approaching other vehicles.

Motorcycle brake lights are more difficult to see than the brake lights of larger vehicles, so flashing your brake light may help other drivers to notice it. You should flash you brake light before slowing down where other drivers may not expect you to slow down, such as in the middle of a block or when approaching an alley.

The last rider in a group of motorcyclists should set the pace of travel. Having the last rider set the pace will ensure that no riders are left behind.

In comparison to flat mirrors, convex mirrors provide a wider view of the road behind you. They also make objects seem farther away than they actually are. You should practice judging distances in convex mirrors if you are not used to them.

There is no single lane position that you always need to avoid. Adjust your position in response to changing conditions on the road.

You should use a tire gauge to check the tire pressure before every ride. An under-inflated tire may still look okay, so a visual check is not enough.

To regain control of a locked rear wheel, the brake must be released. However, if you accidentally lock the rear brake on a good traction surface, you can keep it locked until you have completely stopped.

When doing a pre-ride inspection of your motorcycle, you should check the air pressure, general wear, and tread of your tires.

When passing a row of parked cars, it is often safest to ride in the left portion of your lane. Riding in the left portion will keep you farthest from any opening car doors, people stepping out from between cars, and cars pulling out of parking spaces.

A plastic, shatter-resistant face shield can help protect your whole face if you are involved in a crash. Goggles protect your eyes, but not the rest of your face. A windshield is not an adequate substitute for googles or a face shield.

Appropriate protective gear for motorcycling includes a jacket and pants made of leather or another sturdy material; footwear that covers and supports your ankles; and hearing protection, even if you wear a helmet.

If your front wheel locks as a result of braking, you should release the front brake immediately and re-apply the brake smoothly.

As your weight shifts forward while you are braking, the amount of traction available to the front wheel increases. This means that you can begin to apply the front brake harder.

Choosing a brightly-colored helmet is recommended. Not only will the helmet protect you in the case of a crash, but the bright color of the helmet will help other road users see you.

When riding on a slippery surface, it is safest to decrease your speed. Making sudden moves on a slippery surface could cause your motorcycle to skid. Do not travel on the shoulder to escape a slippery road.

Never assume that other drivers see you, even if they make eye contact with you. It is not uncommon for drivers to look directly at a motorcyclist and still fail to notice them. Always reduce your speed when approaching an intersection.

A motorcycle will continue to ride like new if it is properly maintained and routine inspections become a part of its regular maintenance cycle.

You should use both brakes every time you slow down or stop. Always apply the brakes simultaneously.

Before every ride, you should complete a thorough check of your motorcycle. Be sure to check the rims and spokes to make sure none are bent, loose, or damaged; the condition and tread of the tires; and all of the lights.

To discourage automobile drivers from trying to share your lane, ride in the center portion of the lane.

When riding, wear boots or shoes that are high and sturdy enough to cover and support your ankles. Heels should be short so they don't catch on rough surfaces. Laces should be tucked in so they can't catch onto the moving parts of the motorcycle.

To be effective, eye protection and face shields must be free of scratches; be resistant to penetration; give a clear view to either side; fasten securely; permit air to pass through; and permit enough room for eyeglasses or sunglasses to be worn underneath.

A rider should always use both brakes every time they slow or stop.

Maximum straight-line braking is accomplished by simultaneously applying both the front and rear brakes without locking either wheel.

Taking a corner too fast may cause you to cross into another lane or go off the road. Be sure to decelerate before beginning to take a turn or curve.