Rhode Island MOTORCYCLE DMV Practice Test 12
Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Rhode Island DMV exam is by taking our free practice tests. The following question are from real Rhode Island DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
Before entering a turn, a motorcyclist should reduce their speed by closing the throttle and, if necessary, applying both brakes.
If you accidentally lock the rear brake on a good traction surface, you can keep it locked until you have completely stopped. You should still be able to steer your motorcycle with a locked rear wheel.
Make sure that you are aware of the locations of all your motorcycle's controls before beginning to ride. The horn button on a motorcycle is usually located next to the left handgrip.
The best way to deal with a tailgater is to let them get in front of you. If you can do so safely, change lanes and let the tailgater pass. Riding faster may only increase the danger by prompting them to continue tailgating you at the higher speed.
Strategies for making yourself more visible include wearing brightly-colored and reflective clothing, keeping your headlight on at all times, and varying your lane position as conditions demand.
Wearing goggles provides protection for your eyes, but not for the rest of your face. A face shield provides protection for your whole face and is recommended above goggles. A windshield is not an adequate substitute for a face shield or goggles.
To make yourself visible to others, wearing clothing that is bright orange, red, yellow, or green is best.
Motorcyclists often slow down by simply downshifting. Motorcyclists should be aware that slowing down in this manner does not activate the brake lights.
If a hazard requires you to brake and swerve to avoid a collision, you should take the actions separately. Do not brake while swerving because doing so may cause your motorcycle to fall over.
To reduce your risk of being involved in a crash, you must ensure that you are visible to others on the road and that other drivers understand what you're planning to do. Clearly communicate your intentions through proper signaling and lane positioning. Maintain an adequate space cushion and scan your path of travel, identifying upcoming hazards and being prepared to react.
The minimum number of drinks remaining in a person's system can be estimated by subtracting the number of hours since their last drink from the total number of drinks consumed. For example: a person who has consumed seven drinks in three hours would have a minimum of four drinks remaining in their system three hours later.
Always use the proper turn signal before a turn or lane change. Use your mirrors and perform head checks before changing lanes to check for traffic surrounding your vehicle.
The best way to help other drivers see your motorcycle is to keep your headlight on whenever you ride. During the day, a motorcycle with its headlight on is twice as likely to be noticed.
Experienced riders use an IPDE strategy while riding to make safe judgements. "IPDE" stands for Identify, Predict, Decide, and Execute.
Face shields and goggles, being made of plastic, will develop scratches and become brittle as they age. Replace them regularly to ensure maximum protection and comfort.
The surest way to avoid the risks of riding under the influence of alcohol is to not ride after you have been drinking. Any amount of alcohol can impair your abilities.
Your owner's manual should be your primary source for information about your specific motorcycle. Your manual will include information about the motorcycle's specifications, operation, and suggested maintenance.
Any U.S. Department of Transportation-compliant helmet is required to have an impact-resistant outer shell, an impact-absorbing inner liner, a comfort liner, and a chinstrap retention system.
When being passed, the center portion of the lane is generally the safest lane position for a motorcyclist. Riding on the side nearest the passing vehicle increases the risk of colliding with it. Riding on the side farthest from the passing vehicle can also be dangerous because it may prompt the driver to return to your lane before it is safe to do so.
If your motorcycle fits you properly, your feet should be able to reach the ground while you are seated. When riding your motorcycle, keep your feet firmly on the footrests.
U-turns are prohibited where this sign is posted.
Warning signs are yellow with black lettering or symbols and provide important information to motorists about upcoming road conditions.
A collision must be reported to the police if an operator hits an unattended vehicle, if someone is injured in the collision, or if the collision results in over $1,000 in property damage.
Adjust your mirrors so you can see the lane behind you and as much as possible of the lane next to you. When properly adjusted, a mirror may show the edge of your arm or shoulder, but it’s the road behind you and to the side of you that is most important.
The gearshift lever of a motorcycle is located in front of the left footrest and is operated by the rider's left foot.
- 0Incorrect (5 allowed to pass)
- 0Correct