Oregon MOTORCYCLE DMV Practice Test 3

In Oregon, motorcycles are required to have between one and three white headlights; at least one red taillight; one white license plate light; at least one red brake light; amber turn signal lights (if the motorcycle was built after 1972); a red reflector on the rear; at least one rearview mirror; a horn; fenders on all wheels; at least one brake; and an exhaust system in good working order. All lighting must be U.S. Department of Transportation (DOT)-compliant.

While riding in a staggered formation is usually best for a group of two-wheeled motorcycles, three-wheeled motorcycles are too wide to allow this formation. A group of riders on three-wheeled motorcycles should travel in a single-file line.

There are several advantages to keeping groups of riders small. In comparison to a large group, a small group is easier for other vehicles to pass safely, is less likely to get separated by traffic or stop lights, and creates less need for slower riders to hurry to catch up to the rest of the group.

Strategies for safe riding on slippery surfaces include reducing your speed, avoiding sudden moves, staying away from the edge of the road, and riding in the tire tracks left by other cars.

When marijuana is smoked, it can begin to affect the smoker within minutes and effects can last for between two and four hours. When marijuana is eaten, it may take over an hour to begin to affect the consumer, but the effects of the marijuana may last for more than six hours.

If you accidentally lock the rear brake on a good traction surface, you can keep it locked until you have completely stopped. You should still be able to steer your motorcycle with a locked rear wheel.

To reduce the risk of a crash, you should always ensure that you are visible to others. Communicate your intentions through proper use of your signals, brake light, and lane position. Maintain a space cushion around your motorcycle and consistently scan the road ahead of, behind, and next to your vehicle.

When riding over a rough surface, hold onto the handgrips firmly to ensure that you will maintain directional control over your motorcycle.

Since all motorcycles are somewhat different, you should be very careful when using one that is new to you. Familiarize yourself with the motorcycle before setting off. Learn the gear pattern before riding by working the throttle, clutch, and brakes a few times.

In a group of motorcyclists, less experienced riders should be positioned toward the front, just behind the leader. This ensures that they will not have to chase after the rest of the group. This positioning also allows them to be watched from behind by more experienced riders.

Because adding a load to a motorcycle increases its weight, the vehicle's inertia may increase, causing its stopping distance to increase. Begin slowing and stopping earlier when riding a motorcycle with a load or passenger in its sidecar.

Taking a turn too fast is dangerous. If you cannot hold the turn, you may end up turning into another lane or even off of the road entirely. Use caution when taking a turn.

When approaching a blind intersection, move into the part of the lane that will bring you into an oncoming driver's field of vision at the earliest possible moment. For example, when approaching a blind corner to your right, you may be seen sooner if you are in the left portion of your lane and not in the center portion.

When passing a row of parked cars, a motorcyclist should be prepared for a parked car to suddenly pull out of a parking space and into traffic. It is often safest for a motorcyclist to ride in the left portion of their lane when passing a row of parked cars on their right to create the most possible space between their motorcycle and any potential hazards.

Taking a corner too fast may cause you to cross into another lane or go off the road. Be sure to decelerate before beginning to take a turn or curve.

If you are in the middle portion of your lane, you will have the greatest room for error if your control is disrupted by a wind blast from a passing vehicle.

Shifting to a lower gear produces an effect similar to applying the brakes. This is known as engine braking.

A passenger puts extra weight on a motorcycle, which causes the motorcycle to handle differently. Only experienced riders should carry passengers.

Allowing a cushion of space around your motorcycle at all times will help ensure that you will have time to react if another driver makes a mistake. You will need the space to maneuver safely.

When making a turn, you should look through the turn to where you want to go. Turn just your head, not your shoulders, and keep your eyes level with the horizon.

To maximize your ability to be seen at an intersection, ride with your headlight on and select a lane position that provides oncoming traffic with the best view of your motorcycle. Maintain a space cushion that allows you enough space to take evasive action if a hazard arises. You should never assume that making eye contact with a driver will be enough to make them consciously register your presence.

Appropriate clothing can reduce the risk of injury in a crash. Choose a jacket and pants that cover your arms and legs, are made of sturdy material, and are snug enough that they do not flap in the wind.

To protect yourself against injury, you should wear a DOT-compliant helmet; face or eye protection; a jacket and long pants made of sturdy material; boots or shoes that are high and sturdy enough to cover and support your ankles; and gloves made of durable material.

After mounting your motorcycle, you should make sure the clutch, throttle, horn, and brakes all work properly. Clean and adjust the mirrors and make sure that the fuel supply valve is open.

A properly chosen lane position should provide a number of benefits, including an increased ability to see others and to be seen. It should help you avoid wind blasts, other drivers' blind spots, and surface hazards. Your lane position should discourage other drivers from trying to share your lane and provide you with an escape route, should a hazard arise.