Oregon MOTORCYCLE DMV Practice Test 16
Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Oregon DMV exam is by taking our free practice tests. The following question are from real Oregon DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
To reduce the risk of a collision when riding at night, be sure to reduce your speed and increase your following distance. Use the headlights of vehicles ahead of you to see farther down the road. You should always be flexible about your lane position, especially when riding at night.
You can reduce your risk of injury when riding a motorcycle by wearing an approved helmet, face or eye protection, and protective clothing.
When preparing to pass another vehicle on the left, you should ride in the left portion of your lane. This lane position will provide you with the most effective view of the passing lane.
Oregon law requires a motorcycle's headlight to be on at all times when the motorcycle is being operated. Using your headlight is the best way to ensure that other drivers will see your motorcycle.
Both brakes should be used at the same time whenever you slow or stop.
The front brake of a motorcycle is more powerful than the rear brake. It can provide three-fourths of the bike's total stopping power.
Motorcyclists will seldom hear their tire go flat. Tire failure is more commonly indicated by a sudden change in handling.
An expanded cushion of space is needed if your motorcycle will take longer than normal to stop. If the pavement is slippery, if you cannot see through the vehicle ahead of you, or if traffic is heavy and another driver may try to squeeze in front of you, open up to a larger following distance.
Secured loads should be low. Putting them too high up, such as on a sissy bar, can raise the motorcycle's center of gravity and upset its balance. Loads should be as evenly distributed as possible on each side of the motorcycle to avoid pulling the bike to one side.
Motorcycles have blind spots, just like any other vehicle. Always turn your head to check your blind spot before changing lanes. Head checks should be a regular part of your scanning routine.
Because tires have less traction when a motorcycle is leaning than when it is upright, always try to position your motorcycle in an upright position before braking. If you must brake while in a curve, apply the brakes more smoothly and gradually than if your motorcycle was traveling on a straightaway.
Shifting to a lower gear produces an effect similar to applying the brakes. This is known as engine braking.
A motorcycle has blind spots just like any other vehicle. A rider must always turn their head to check for traffic before changing lanes.
The best way to handle a tailgater is to change lanes and let them pass you. Speeding up may cause them to tailgate you at a higher speed, only increasing the danger. Never ride on the shoulder of a road because drivers will never expect you to be there and may leave the road suddenly.
A linked braking system connects the front and rear brakes on a motorcycle. This system applies braking pressure to both brakes when either the front or rear lever is used. Check your owner's manual for a detailed explanation of the braking system on your motorcycle.
The gearshift lever is located in front of the left footrest and is operated with the left foot.
To reduce the risk of being involved in a crash, ensure that you are visible to others on the road. Communicate your intentions through your turn signals, brake light, and lane position. Maintain an adequate space cushion, scan your path of travel 12 seconds ahead of your vehicle, and be prepared to act if any hazards arise.
To execute a swerve, press the handgrip on the side of your desired turn. Press on the opposite handgrip to return to your original direction after you are clear of the hazard.
It is safest to wear long pants and a jacket to fully cover your arms and legs while riding. Clothing made of leather can provide the highest level of protection.
Because of the additional weight added by cargo or a passenger, motorcycles may take longer to accelerate and stop than they would if only transporting the operator.
Your following distance should be larger than usual when you are traveling under imperfect conditions. Increase your following distance if pavement is slippery, you can't see through the vehicle in front of you, or traffic is heavy.
An expanded cushion of space is needed if your motorcycle will take longer than normal to stop. If the pavement is slippery, if you cannot see through the vehicle ahead of you, or if traffic is heavy and another driver may try to squeeze in front of you, open up your following distance.
Motorcycles generally have two brakes, one for the front wheel and one for the rear wheel.
Conduct a thorough pre-ride inspection before every ride. It should usually take only a few minutes.
You should never take eye contact with another driver as a guarantee that they will properly yield the right-of-way to you.
- 0Incorrect (5 allowed to pass)
- 0Correct