Over 95% pass rate when practice at DMV Practice Test

Oklahoma MOTORCYCLE DMV Practice Test 12

Take 16 practice tests for MOTORCYCLE is the best way to prepare for your Oklahoma DMV exam is by taking our free practice tests. The following question are from real Oklahoma DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
16
Number of Question
20
Passing score
16
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. When riding over rough surfaces, you should:
Hold the handgrips loosely to allow for movement.
Hold the handgrips firmly to maintain control.
Use lots of throttle to help you get over the rough surface.
Ride without a helmet as the helmet could become loose and cover your face.

When riding over a rough surface, hold onto the handgrips firmly to ensure that you will maintain directional control over your motorcycle.

2. When riding on a slippery surface, you should not:
Reduce your speed.
Avoid sudden moves.
Use both brakes.
Brake quickly.

To safely ride on a slippery surface, you should reduce your speed, avoid making sudden movements, and use both brakes if you need to brake.

3. If the road is wet, you should avoid:
The left portion of a lane.
The center portion of the lane.
The right portion of the lane.
All areas of the lane.

Oily drippings from cars and trucks collect in a strip in the center portion of a lane. This strip usually still provides enough traction for motorcyclists to operate safely, except when the road is wet. The strip is usually narrow enough that you can ride to its side and still be in the center portion of the lane.

4. You can increase your visibility by:
Adding auxiliary lights to your motorcycle.
Not using your turn signal.
Wearing dark clothing.
Waving at people.

To increase your visibility, you can wear clothing that is brightly-colored or that contains reflective materials. Adding auxiliary lights to your motorcycle, using your turn signals, and flashing your brake light when appropriate are also good ways to get the attention of other road users.

5. If taking a long trip, you should:
Try to minimize the number of rest breaks.
Use artificial stimulants, like caffeine, if you feel drowsy.
Dress warmly to avoid getting too cold during the ride.
Schedule more than 12 hours of riding a day.

To reduce the risk of fatigue on a long trip, dress to protect yourself from tiring elements, such as wind, cold, and rain. Limit yourself to no more than six hours of riding per day and take rest brakes at least every two hours. Avoid using artificial stimulants, as these only result in extreme fatigue when they wear off.

6. An experienced rider:
Changes positions within their lane as conditions change.
Stays in one portion of a lane at all times.
Weaves within the lane to be more visible.
Travels only on the oily portion of the lane.

Unlike drivers of larger vehicles, a motorcyclist has three lane position options in their travel lane. The rider should select whichever position is safest based on road and traffic conditions.

7. The shortest and safest stops are accomplished:
By using only the rear brake.
By using only the front brake.
By allowing the front tire to lock up.
By using both the front and rear brakes.

The shortest and safest stops are achieved by using both the front and rear brakes in a smooth and progressive manner, without skidding either tire.

8. When slowing or stopping, you should use both brakes:
Only if the pavement is wet.
Infrequently.
Only when riding in the city.
Every time.

You can achieve maximum stopping power by using both the front and rear brakes. You should use both brakes every time you slow or stop.

9. If a rider in a group wants to ride faster than the others, what should the group do?
Let the rider go ahead and meet up at a designated spot later.
Speed up to accommodate the one rider.
Split up and have every rider travel as fast or as slow as they want.
Let the rider that wants to go faster lead the group.

If one member of a group wants to ride faster than the others, it is best to let them go ahead of the group and meet at a designated spot later.

10. A major effect of alcohol consumption is:
Heightened riding abilities.
The slowing down of bodily functions.
Increasing nervousness.
Increasing alertness.

Alcohol is a depressant. It slows down and impairs bodily functions, both physical and mental.

11. When carrying a passenger, you should:
Equip and adjust your motorcycle to carry the passenger.
Ride as you would without a passenger.
Ensure that footrests are available for only you, the operator.
Instruct the passenger after you begin your trip.

You should transport a passenger only if your motorcycle is appropriately equipped and adjusted to do so. Among other things, your motorcycle should have separate footrests for the passenger and a seat that is large enough for more than one person to sit comfortably. You may need to adjust your headlight, tire pressure, and suspension to accommodate the extra weight of a passenger.

12. When exiting a highway while riding in a group, which riding formation should be used?
Staggered
Single-file
Paired up
Riding three across a lane

While a staggered formation is usually best for group riding, a group should switch into a single-file formation when taking curves, turning, or entering or exiting a highway.

13. Impairment from drinking alcohol occurs:
Well below the legal limit.
Once reaching the legal limit.
Just above the legal limit.
Well above the legal limit.

It is never safe to operate a motorcycle after consuming any amount of alcohol. Impairment of the skills needed to safely ride begins well below the legal limit.

14. The front brake:
Should only be used when you need to stop quickly.
Should be used only under slippery conditions.
Is not as effective as the rear brake.
Is safe to use, if used properly.

Always use both brakes any time you slow or stop. It is safe to use the front brake, which is more powerful than the rear brake, as long as you use it properly.

15. If you must brake and swerve to avoid a hazard, you should:
Do one, then the other.
Do both at the same time.
Always apply the brakes first, then swerve.
Try instead to use only the brakes.

If you must brake and swerve to avoid a hazard, you should perform both actions separately. Brake then swerve, or swerve then brake. Do not do both at the same time.

16. Which of the following is not important when looking for a motorcycle helmet?
The helmet meets U.S. Department of Transportation standards.
The helmet fits snugly all the way around your head.
The helmet has no obvious defects, such as cracks or loose padding.
The helmet looks cool.

To ensure that a helmet will provide you with as much protection as possible, check to see if it meets U.S. DOT and state standards; fits snugly all the way around your head; and has no obvious defects, such as cracks, loose padding, or frayed straps.

17. As an operator, you should prepare a passenger to ride by instructing them to do each of the following, except:
Get on the motorcycle after the engine has been started.
Sit as far forward as possible.
Maintain a large space between themselves and you.
Keep their legs away from the muffler and chains.

Before beginning a ride, you should ask your passenger to mount the motorcycle only after the engine has been started. They should sit as far forward as they can without crowding you and hold onto the motorcycle's passenger handholds or onto your waist, hips, or belt. They should keep their legs away from the muffler, chains, and other moving parts.

18. You’ll have a better chance of avoiding serious injury if you wear all of the following, except:
A DOT-approved helmet.
Face or eye protection.
Ear buds.
Protective clothing.

To protect yourself against injury, you should wear a DOT-compliant helmet; face or eye protection; a jacket and long pants made of sturdy material; boots or shoes that are high and sturdy enough to cover and support your ankles; and gloves made of durable material.

19. When an operator's left arm is bent at the elbow and pointing upward, it means the operator:
/data/image/dmv_image/motorcycle/vt-1.png
Plans to turn left.
Is about to stop.
Plans to turn right.
Is about to slow down.

Instead of mechanical turn signals, operators may use hand signals to indicate turns or stops. If an operator's left arm is bent at the elbow and pointing upward, it means the operator plans to turn right or change lanes to the right.

20. Which portion of the lane should be avoided?
The left portion of the lane
The center portion of the lane
The right portion of the lane
No portion of the lane should always be avoided.

There is no lane position that is always best and no lane position that should always be avoided. Select a lane position that is appropriate for riding conditions.

Your Progress
  • 0Incorrect (4 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20