North Dakota MOTORCYCLE DMV Practice Test 7

The throttle of a motorcycle is usually located on the right handle grip. Be sure to know where all of your motorcycle's controls are located before riding.

When riding behind a car, you should position yourself so you can be seen in the other driver's rearview mirror. Riding in the center portion of the lane will generally ensure that you will appear in the middle of their rearview mirror, where the driver is most likely to notice you.

To reduce the risk of being involved in a crash, ensure that you are visible to others on the road. Communicate your intentions through your turn signals, brake light, and lane position. Maintain an adequate space cushion, scan your path of travel 12 seconds ahead of your vehicle, and be prepared to act if any hazards arise.

All passes must be completed within the posted speed limits and only in areas where passing is permitted.

A motorcycle passenger needs to understand how to ensure a safe ride ride for both themselves and the operator. An operator should never assume the passenger already knows what to do. Give a passenger complete instructions before every ride.

Almost all drugs, including over-the-counter medications, have the potential to impact the abilities you need to ride safely. Make sure you understand the side effects of any drug before combining it with riding.

Strategies for safely riding at night include reducing your speed, increasing your following distance, using the lights of the car ahead to help see farther down the road, using your high beam headlight (unless following or meeting another vehicle), and being flexible about your lane position.

If your motorcycle fits you properly, your feet should be able to reach the ground while you are seated. When riding your motorcycle, keep your feet firmly on the footrests.

To provide adequate protection when riding, jackets and pants should cover your arms and legs completely. Your clothing should fit snugly but be loose enough to let you move freely. Leather or newer kinds of synthetic materials provide the best protection in the case of an accident.

Before setting off on any ride, you should do a thorough check of your motorcycle. Inspect the tires, oil and fluid levels, headlight, tail light, turn signals, brake light, clutch and throttle, mirrors, brakes, and horn.

It is possible to use both brakes while turning, but it must be done with great care. Some of the tires' usual traction is being used to make the turn while the motorcycle is leaning, so less traction is available for stopping.

To be effective, an eye or face shield must be free of scratches; be resistant to penetration; allow clear views to both sides; fasten securely; permit air to pass through to prevent fogging; and allow room for eyeglasses or sunglasses, if needed.

You should wear reflective materials when riding at night to make yourself more visible to other road users.

When riding, you should be positioned so that you are able to easily operate all controls. Sit with your arms slightly bent and use your arms to steer rather than to hold up your body. Keep your knees against the gas tank to help maintain your balance during turns.

While some people worry that wearing a helmet may dangerously limit their field of vision, this is not the case. Any approved helmet will let the operator see as far to the sides as is needed for safe riding.

Oily drippings from cars collect in a strip in the center of a traffic lane. Unless the road is wet, this area will generally still provide enough traction for motorcyclists to ride safely. Because the strip is usually no more than two feet wide, it is often possible to ride to one side of the strip and still be in the center portion of the lane.

It is possible to brake while turning, but it should be done with great care. When a motorcycle is leaning to turn, there is less traction available for stopping because some of the traction is being used for turning.

When riding in a group, you should maintain close ranks but still keep an adequate space cushion around each rider.

During normal turns, the motorcycle and the rider should be leaning together at the same angle. In slow, tight turns, only the motorcycle should lean while the rider keeps their body straight up.

If either of your tires go flat and you must brake, gradually apply the brake of the tire that is not flat (if you are certain of which tire that is).

You are especially vulnerable as a motorcyclist, so it is very important to use your turn signals to alert others to your intentions. Always use them any time that you plan to change lanes or turn, even if you don't think anyone else is nearby.

Drippings from cars tend to form an oily strip in the center of each lane. Unless conditions are wet, it is usually still safe for a motorcycle to operate on the center strip.

Goggles can protect your eyes, but only a face shield can protect your entire face in a crash.

A plastic, shatter-resistant face shield can help protect your whole face if you are involved in a crash. Goggles protect your eyes, but not the rest of your face. A windshield is not an adequate substitute for googles or a face shield.

Under normal conditions, you should maintain a following distance of at least three seconds. Increase your following distance any time conditions are less than perfect.