North Dakota CDL DMV Endorsement Hazmat 1
Take 10 practice tests for CDL is the best way to prepare for your North Dakota DMV exam is by taking our free practice tests. The following question are from real North Dakota DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic control skills test.
There are nine different classes of hazardous materials. A class reflects the risks associated with a type of material.
You will be asked to make multiple lane changes during the driving skills test. Before changing lanes, you should make the necessary traffic checks and use proper signals. Change lanes smoothly when you can do so safely.
Shippers must place diamond-shaped hazard warning labels on most packages of hazardous materials. If the label won't fit on the package, it can be placed on a tag that is securely attached to the package.
Hazardous materials should always be loaded away from heat sources. Many materials become more hazardous if their temperatures increase.
A vehicle with tanks that are used to transport hazardous materials must always be stopped before being driven over railroad tracks, even if the tanks are empty.
When checking a cargo lift as part of your vehicle inspection test, you should check for leaking, damaged, or missing parts. The lift must be fully retracted and latched securely.
For applicable materials, the "Poison Inhalation Hazard" placard and the appropriate hazard class placard must always be displayed, even for small amounts of the materials.
When approaching a curve during the on-road driving skills test, you must reduce your speed sufficiently before entering the curve so that you do not need to further brake or shift in the curve. Keep the vehicle in its lane and continue to check for traffic in all directions.
During the basic vehicle control skills test, there is no penalty for an initial pull-up; however, an excessive number of pull-ups will count as errors.
Parts of a vehicle that have been exposed to a corrosive material must be thoroughly washed with water.
The person in charge of loading or unloading a hazardous materials cargo tank must ensure that a qualified person is always supervising the process. The supervisor must be alert; have a clear view of the tank; be within 25 feet of the tank; know the hazards of the involved materials; know the procedures to follow in the case of an emergency; and be authorized to and capable of moving the tank.
During the vehicle inspection test, you must be able to indicate where the oil dipstick is located; show that the oil level is within a safe operating range; and show that the oil level is above the refill mark.
Hazardous materials warning placards must be used on all four sides of a vehicle transporting hazardous materials.
Identification numbers, shipping names, and hazard classes must never be abbreviated when listed on a shipping paper. The only exception to this is if the abbreviation is specifically authorized in the hazardous materials regulations.
When hazardous materials placards are required, they must be placed on all four sides of the vehicle.
Before a trip, ensure that the steering box is securely mounted. Check for missing nuts, bolts, and cotter keys. Be sure that there are no power steering fluid leaks and that there is no damage to power steering hoses.
The loading and unloading of a tank must be watched by a qualified person. They must be alert; have a clear view of the tank; stay within 25 feet of the tank; know the hazards of the materials involved; know the procedures to follow in an emergency; and be authorized and able to move the tank if necessary.
Once you have stopped as a part of the stop/start maneuver during the on-road driving skills test, you must activate your four-way flashers and shift into neutral or park. You must not block any driveways, intersections, fire hydrants, or signs.
A hazardous material will fall into one of nine hazard classes. The material's hazard class reflects its associated risks.
When inspecting a trailer during a vehicle inspection test, ensure that its landing gear has no missing parts and that it is fully raised. The crank handle should be secure and the support frame should not be damaged.
To determine which hazardous materials placards to use, you must know the hazard class of the materials; the amount of hazardous materials being shipped; and the total weight of all classes of hazardous materials in the vehicle.
During the on-road driving skills test, you may be asked to enter an expressway. Before doing so, you must check traffic, use proper signals, and merge smoothly into the proper lane.
The marine pollutant marking is the image of a fish in a white triangle with an X through through the fish.
During the basic vehicle control skills test, a pull-up will be scored any time an applicant stops and pulls forward to gain a better position. Stopping without changing direction will not. An excessive number of pull-ups will count as errors.
Diamond-shaped warning signs, called "placards," are placed on the outside of a vehicle carrying hazardous materials to serve as a warning.
You must take and pass the written English version of the HazMat knowledge test and be cleared through a federal background check before every renewal of your CDL.
A shipping paper describes the hazardous materials being transported. Shipping orders, bills of lading, and manifests are all shipping papers.
During a vehicle inspection test, you must ensure that all lug nuts are present, free of cracks and distortions, and showing no signs of looseness, such as rust trails or shiny threads. Verify that all bolt holes are free of cracks and distortions.
If you are asked to alley dock, you should first pull past the alley and stop your vehicle in a position that is parallel to the outer boundary. From there, you should back your vehicle entirely into the alley parking area. Your vehicle should be parked in a straight position within the boundaries of the parking space.
Try more CDL North Dakota Practice Test
- 0Incorrect (6 allowed to pass)
- 0Correct