Over 95% pass rate when practice at DMV Practice Test

New Mexico CDL DMV Endorsement Tank 1

Take 10 practice tests for CDL is the best way to prepare for your New Mexico DMV exam is by taking our free practice tests. The following question are from real New Mexico DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
10
Number of Question
20
Passing score
16
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. Smooth bore tanks have:
Bulkheads with holes that allow the passage of liquids.
Bulkheads that limit the flow of liquids.
Nothing inside to slow the flow of liquids.

Smooth bore tanks lack internal baffles. Compared to other types of tanks, unbaffled tanks are the most prone to front-to-back surge.

2. A broken exhaust system can:
Let poisonous fumes into the cab.
Improve fuel efficiency.
Make steering more difficult.

Defects in an exhaust system are very dangerous because they can cause poisonous fumes to enter the cab or sleeper berth.

3. A thin layer of ice that forms on road surfaces is called:
White ice.
Black ice.
Blue ice.

Black ice is a thin layer of ice that is clear enough for the road surface to be seen through it. A road covered in black ice may look like it is merely wet. You should be very careful when temperatures are below freezing and the road looks wet.

4. To change lanes, you should:
Move quickly.
Move slowly and smoothly.
Hold down your horn.

Always change lanes slowly and smoothly. If you did not see drivers who are already using the lane you wish to occupy, this will give them a chance to get out of your way or honk their horns to alert you. Always signal when changing lanes.

5. Many products classed as poison are also:
Radioactive.
Flammable.
Gases.

Many hazardous materials classified as poisonous are also flammable.

6. Vehicles driving behind a truck:
May have difficulty seeing objects in front of the truck.
Often have a great view of the roadway in front of them.
Do not need to signal.

Your truck may block the views of drivers behind you, making them unaware of any upcoming hazards that require you to stop. For this reason, it is a good idea to flash your brakes and warn other drivers before slowing or stopping.

7. When it’s difficult to see, such as at dawn or dusk, a driver can increase their vehicle's visibility by:
Driving while using their lights.
Driving with their windows open.
Flashing their lights periodically.

When driving at dawn, at dusk, or in inclement weather, you should use your headlights on their low beam setting to increase your visibility.

8. If a vehicle is carrying hazardous cargo, placards must be placed:
Only on the front of the vehicle.
On the front, rear, and sides of the vehicle.
Only on the driver’s side of the vehicle.

Placards must be placed on the front, the rear, and both sides of a vehicle carrying hazardous cargo. They must be readable from any direction.

9. You should always be able to stop within:
10 feet of your vehicle.
100 feet of your vehicle.
Your view of the road ahead.

It is essential that your vehicle will be able to stop within the area of the road that you are able to see. This means that you must slow down whenever conditions reduce visibility.

10. What should you do if your vehicle gets stuck on railroad tracks?
Stay in the vehicle.
Get out of the vehicle and call for assistance.
Continue trying to get your vehicle off the tracks until you are successful.

If your CMV gets stuck on railroad tracks, you should immediately leave the vehicle and get away from the tracks. Check the signposts or signal housing at the crossing for emergency contact information and call 911, or another appropriate emergency number.

11. You can find the identification numbers assigned to hazardous chemicals:
In the DOT Emergency Response Guide.
In the truck's driver’s manual.
On the company's website.

The U.S. Department of Transportation (DOT)'s Emergency Response Guide provides information about hazardous materials, indexed by proper shipping names and hazardous materials identification numbers.

12. If a driver has stopped on the road and is placing triangles to warn other motorists:
The triangles should be held between the driver and oncoming traffic.
The triangles should be carried behind the driver's back to prevent them from being seen by other drivers until they are placed.
The triangles should be held as low as possible.

For your own safety, when placing reflective warning triangles, you should carry them between your body and the oncoming traffic.

13. To check the automatic transmission fluid level in some vehicles, you will have to:
Park your vehicle uphill.
Park your vehicle downhill.
Leave the vehicle running.

In some vehicles, it may be necessary to leave the engine running when checking the automatic transmission fluid level.

14. When braking while pulling a trailer equipped with anti-lock brakes, you should:
Pump the brakes.
Use extra braking force to ensure the brakes kick in.
Brake as you would without anti-lock brakes.

When driving a tractor-trailer combination that is equipped with an Anti-Lock Braking System (ABS), you should brake in the same manner that you would if the vehicle was not equipped with ABS.

15. To avoid a collision with a hazard on the roadway:
You should always try to stop.
Swerving may be a safer option than stopping.
You should never swerve.

Swerving out of the way of a hazard is sometimes safer than trying to stop before reaching the hazard. You can usually turn away from something more quickly than you can come to a complete stop.

16. A trolley valve:
Should be used while driving.
Should only be used to test trailer brakes.
Should be used when parking uphill.

The trailer hand valve (also referred to as the trolley valve or Johnson bar) is a mechanism that works the trailer brakes. It should only be used to test the brakes. Using it while the vehicle is being driven could cause a skid. Never use the trailer hand valve while parking because doing so may release the air pressure from the braking system, releasing the brakes that are holding the vehicle in place.

17. If you are transporting hazardous materials and the cargo catches on fire, you should:
Try to put out the fire with a fire extinguisher.
Contact emergency personnel and let them battle the fire.
Continue driving to the fire department.

Fighting a hazardous materials fire requires specialized training and equipment. Unless you possess these yourself, it is best to let emergency personnel deal with the fire.

18. Which agency helps coordinate emergency response to chemical hazards?
The National Response Center
The Federal Containment Organization
The United Center for Chemical Assistance

The National Response Center helps coordinate emergency response to chemical hazards. It should be contacted in the event of a hazardous materials spill.

19. A person attending a placarded vehicle may be:
In the sleeper berth.
Either awake or asleep inside the vehicle.
Within 100 feet of the vehicle.

A person attending a parked placarded vehicle must be either awake inside the vehicle or they must be within 100 feet of it. If not inside the vehicle itself, the person must have a clear view of the vehicle. The person attending may not be inside the sleeper berth.

20. Before attempting to put out an engine fire:
The hood should be opened.
The engine should be turned off.
The accelerator should be depressed to use up the remaining fuel.

If you experience an engine fire, you should turn off the engine as soon as safely possible. Avoid opening the vehicle's hood when extinguishing the fire.

Your Progress
  • 0Incorrect (4 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20