Over 95% pass rate when practice at DMV Practice Test

New Mexico CAR DMV Practice Test 17

Take 24 practice tests for CAR is the best way to prepare for your New Mexico DMV exam is by taking our free practice tests. The following question are from real New Mexico DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
24
Number of Question
25
Passing score
20
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. This sign means:
/data/image/dmv_image/car/washington-divided_highway_road_ends.png
Curves ahead.
Divided highway starts.
Divided highway ends.
Bumps in the road.

This sign warns drivers that the divided highway ends ahead.

2. A person's ability to drive can be impaired by:
Alcohol.
Any medication.
A lack of sleep.
All of the above.

The ability to drive safely is dependent on the driver being in good physical condition. Driving can be impaired by alcohol, legal and illegal drugs, and being drowsy.

3. Pentagonal signs indicate:
No passing zones.
School zones.
Speed limits.
Railroad crossings.

Pentagonal signs indicate that you are in a school zone. Be extra alert to children and pedestrians when driving near a school.

4. What is the only medically proven method of removing alcohol or other drug combinations from your system?
Breathe in some fresh air.
Give your body time.
Drink coffee.

Alcohol takes effect quickly and is slow to leave your system. Cold showers, black coffee, and exercise will do nothing to reduce a person's blood alcohol content (BAC). The only way to lower your BAC is to wait.

5. When changing lanes, you can check your blind spots by:
Using the inside rearview mirror.
Using the outside rearview mirror.
Using both inside and outside rearview mirrors.
Turning your head and looking over your shoulder.

You should turn your head to check your blind spots before every lane change.

6. As the percentage of alcohol (BAC) in your blood increases, you become:
More intoxicated.
More sober.
More coordinated.

Blood alcohol concentration (BAC) is a measure of the percentage of alcohol in a person's blood. The higher the BAC, the more impaired a person is.

7. When backing up:
Look through the rear window.
Press hard on the gas pedal.
Rely only on your rearview mirror.

When backing up, place your right arm on the back of the passenger seat and look directly through the rear window. Do not depend on your rearview or side mirrors as mirrors do not show directly behind your vehicle. Only drive in reverse at a low speed.

8. Trucks' blind spots are:
Directly behind the body.
On the immediate left of the cab.
Both on the immediate left of the cab and directly behind the body.

A truck's blind spots are much larger than a smaller car’s blind spots. The driver cannot see your car behind their vehicle and you can't see what’s happening in traffic ahead if you're driving too closely behind the truck. Whether you are driving behind or to the side of the truck, if you can’t see the driver’s face in their side view mirror, then they can’t see you.

9. A flashing yellow light at an intersection means that you should:
Slow down and proceed with care.
Continue normally through the intersection.
Stop and proceed when a green light appears.
Stop and proceed when the way is clear.

A flashing yellow light at an intersection means "caution." If you approach such a light, slow down, look, and proceed with care.

10. This sign means:
/data/image/dmv_image/car/connecticut-roundabout_circle.png
Roundabout ahead.
Lane ends, merge left.
Turn around.
Curve ahead.

This sign indicates that a roundabout is ahead. Enter a roundabout at a low speed and yield to existing traffic.

11. This sign means:
/data/image/dmv_image/car/illinois-crossroad.png
Crossroad ahead.
Merge.
Stop.

This sign indicates that there is a crossroad ahead.

12. This road sign means:
/data/image/dmv_image/car/maryland-no_right_turn.png
No right turn.
No U-turns.
No left turn.

Regulatory signs provide notice to road users of traffic laws and must be obeyed. Where this sign is posted, making a right turn is prohibited.

13. To be safe when crossing a railroad, you should:
Look both ways, but only when the red light is flashing.
Listen, look both ways, and then proceed if it is safe to do so.
Cross especially quickly when a train is approaching.
Quickly pass under any lowering gates.

Railroad crossings are always dangerous. Drivers should look and listen for an approaching train coming from either direction before proceeding across the tracks. Watch for signals indicating an approaching train and never proceed until you are certain it is safe to do so.

14. This sign means:
/data/image/dmv_image/car/Idaho-crossroad.png
All traffic must turn.
Turn right at the intersection.
Parking area ahead.
Crossroad ahead. Watch for traffic.

This sign warns of the presence of a crossroad ahead.

15. When should drivers yield the right-of-way to pedestrians in a crosswalk?
Only if the pedestrians first wave to the driver.
Only if the pedestrians are not texting while walking.
At all times.

Bring your vehicle to a complete stop at a crosswalk to yield the right-of-way to any vehicle or pedestrian already in the intersection. You may carefully proceed if your lane is completely clear.

16. The best thing to do if you become tired while driving is to:
Stop to rest or change drivers.
Drink coffee.
Open a window.

If you become tired while driving, it is best to stop to rest or change drivers. Being tired dulls your mind and slows down your reactions, making driving hazardous.

17. If you are following a school bus or tank truck, you should:
Pass them on the right.
Be prepared to stop at all railroad crossings.
Decrease your following distance.

School buses and tank trucks carrying flammable liquids must always stop before crossing railroad tracks, regardless of the presence of a train. Be prepared to stop at all railroad crossings if following one of these vehicles.

18. Having a driver license is a:
Requirement.
Privilege.
Right.

It is important to remember that driving is a privilege and that all drivers play a role in ensuring that everyone remains safe on the roadways. If you prove to be abusive of that privilege, the privilege may be revoked.

19. What does a lane use control signal displaying a solid yellow X above a reversible lane indicate?
The signal is about to change to a red X.
The signal is about to change to a green arrow.
Drivers may drive normally in this lane.
Drivers may drive slowly in this lane.

Lane use control signals are used when the direction of the flow of traffic in a specific lane changes throughout the day. They are used to show which lanes of traffic are open and closed, as well as to show if toll booths are open or closed. When a lane control signal contains a solid yellow X, drivers should clear the indicated lane, as the lane signal is about to change to a red X.

20. If it feels like your tires have lost contact with the surface of the road, you should:
Slow down by shifting into a lower gear.
Ease your foot off the gas pedal.
Slow down by pumping the brakes quickly and firmly.

If it feels like your tires have lost contact with the surface of the road, you should ease your foot off the gas pedal and stay off the brakes. Do not try to stop or turn until your tires are gripping the road again.

21. This sign means:
/data/image/dmv_image/car/new-york-traffic_signal_ahead.png
Continue at your current speed.
You must stop ahead.
Speeding is not allowed.
There is a traffic signal ahead.

This sign indicates that there is a traffic signal ahead.

22. As you approach an intersection with a flashing yellow light:
Stop before crossing the intersection.
Slow down and proceed with caution.
Wait for a green light before proceeding.

A flashing yellow light means that you should slow down, check for cross traffic, and proceed with caution.

23. Coming to a complete stop at an intersection, yielding to cross traffic/pedestrians, and then proceeding through the intersection when the way is clear corresponds with:
A solid red light.
A flashing yellow light.
A solid green light.
A flashing red light.

A flashing red traffic light means the same thing as a stop sign. You must come to a complete stop, yield to cross traffic and pedestrians, and then proceed when the way is clear.

24. A sign with this shape means:
/data/image/dmv_image/car/pennsylvania-no_passing_zone2.png
No passing zone.
Right turn permitted on red.
Yield right-of-way.

A pennant-shaped sign marks the beginning of a no passing zone.

25. At intersections, crosswalks, and railroad crossings, you should always:
Stop, listen, and proceed cautiously.
Look to the sides of your vehicle to see what is coming.
Slowly pass vehicles that seem to be stopped for no reason.

Any time you come to a place where people may cross or enter your path, or where one line of traffic meets another, you should look to the left and right sides of your vehicle to make sure no one is coming.

Your Progress
  • 0Incorrect (5 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25