Over 95% pass rate when practice at DMV Practice Test

New Jersey CDL DMV Endorsement Double 2

Take 10 practice tests for CDL is the best way to prepare for your New Jersey DMV exam is by taking our free practice tests. The following question are from real New Jersey DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
10
Number of Question
20
Passing score
16
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. Truck tractors with air brakes built on or after March 1, 1997 must have:
An Anti-Lock Braking System (ABS).
Bluetooth.
GPS.
A rear back-up camera.

Truck tractors with air brakes built on or after March 1, 1997 must be equipped with Anti-Lock Braking Systems (ABS).

2. An Anti-Lock Braking System (ABS):
Cannot be used with air brakes.
Should be used on dry pavement.
Can assist in maintaining control when braking.
Should only be used if all axles have ABS.

Anti-Lock Braking Systems (ABS) are compatible with air braking systems. ABS helps maintain control of a vehicle and prevents the wheels from locking up during hard braking on slippery surfaces. ABS can still provide benefits even if is present on only one axle.

3. Test the tractor protection valve by:
Removing the air supply knob.
Removing the parking brake control knob.
Releasing air with the brake pedal.
Releasing air with the gas pedal.

You should test the tractor protection valve by allowing the air supply to properly charge, turning off the engine, then releasing air from the system by pressing the brake pedal several times. The tractor protection valve should move into its emergency position when psi drops to an unsafe level.

4. When approaching a downgrade, how can you reduce the amount of braking that will be needed?
Switch to a higher gear.
Switch to a lower gear.
Switch to neutral.
Turn off the engine.

Always shift to a lower gear before starting down a hill. Doing this will help your vehicle maintain a safe speed without you needing to use the brakes too much.

5. Improper coupling is:
Impossible.
Not a problem.
Not easily detected.
Very dangerous.

It is essential that drivers of doubles and triples are able to correctly couple and uncouple their trailers. Improperly coupling and uncoupling trailers is extremely dangerous.

6. In poor weather, the driver of a double or triple should:
Lead the way for other drivers.
Drive on the shoulder of the road.
Exceed the posted speed limit.
Drive carefully, as the vehicle is prone to skidding.

In adverse weather conditions, special care must be taken when driving a double or triple. They are especially prone to skids, loss of traction, and rollovers.

7. Driving at night is:
Safer than driving during the day.
Just as safe as driving during the day.
More dangerous than driving during the day.
Discouraged.

Driving at night is more dangerous than driving during the day. It is more difficult for drivers to see hazards, the glare of headlights can affect drivers' vision, and there are more fatigued and impaired drivers on the road.

8. If you need to back your trailer but cannot back up in a straight path, you should:
Back toward the passenger's side.
Back toward the driver's side.
Swerve back and forth while backing.
Always turn to your right.

If you need to back your trailer but cannot back up in a straight path, you should back on a curved path toward the driver's side of the vehicle. This will permit you the best possible visibility while backing.

9. Which of the following is acceptable?
Dual tires that do not come into contact with each other
Tires of mismatched sizes if used only on short trips
Retreaded tires on the front of a school bus
Tires with cracks

When inspecting a vehicle, you should ensure that dual tires do not come into contact with each other or with other parts of the vehicle. Tire sizes should not be mismatched, and tires should not be cut or damaged in any way. Regrooved, recapped, or retreaded tires are not permitted to be used on the front wheels of a bus.

10. How can you avoid becoming drowsy on a trip?
Get about three hours of sleep beforehand.
Plan ahead, including stopping points.
Do not build exercise into your daily routine.
Schedule the trip at night.

Strategies to reduce the risk of fatigue while driving include getting seven to eight hours of sleep beforehand; scheduling trips for the hours during which you are normally awake; planning to take breaks during the trip; and exercising regularly.

11. A vehicle equipped with an Anti-Lock Braking System (ABS) uses a ____ light to warn that the system is not working properly.
Green
Yellow
Orange
White

Anti-Lock Braking System (ABS) malfunction lamps are usually yellow. Even if the ABS isn't working properly, a driver will still have access to the vehicle's usual braking functions.

12. When approaching a railroad crossing, you should:
Rely on the posted signals to indicate when a train is approaching.
Rely on the movements of other motorists to indicate when a train is approaching.
Not rely on signals to indicate when a train is approaching.
Look to see if nearby plants are moving from the breeze created by a passing train

As a precaution, you should always approach a railroad crossing under the assumption that a train is coming. Do not rely only on signals or your hearing to indicate that a train is approaching.

13. Which of the following is not a sign of fatigue?
Ability to focus
Daydreaming
Yawning repeatedly
Drifting from your lane

Driving while fatigued is dangerous. Warning signs of fatigue include difficulty focusing; repeated yawning or rubbing of the eyes; daydreaming or wandering thoughts; and drifting out of your lane.

14. When parked on the side of the road, you should:
Use only the rear flashing lights.
Use one set of turn signals.
Use your high beam headlights.
Use your four-way flashers.

Always turn on your four-way emergency flashers if you must park on the side of the road. This is especially important when traveling at night.

15. When backing a truck, you should:
Only use the side mirrors on the driver’s side.
Use both side mirrors.
Not use a helper.
Only use the mirror on the passenger's side.

To remain aware of hazards behind your vehicle when backing, you should frequently check your mirrors on both sides of the vehicle. Have a helper watch your blind spots whenever possible.

16. Which of the following statements is correct?
Rims with a missing lug nut are acceptable if there are at least four other lug nuts on the rim.
A cracked lock ring is acceptable if the vehicle is being driven at speeds under 55 mph.
A missing clamp is dangerous and should be corrected.
Welded repairs are acceptable for wheels on rear axles.

Missing clamps, spacers, studs, or lugs can be a dangerous defect. Mismatched, bent, or cracked lock rings are not safe to be used. Wheels or rims with welded repairs are not safe.

17. Mirror adjustment can only be checked properly if:
The trailer is straight.
There is no trailer attached to the tractor.
The vehicle is on a slight incline.
The vehicle is on a slight decline.

If a trailer is attached to a tractor, the adjustment of the vehicle's mirrors can only be checked accurately if the trailer is straight.

18. Compared to other commercial motor vehicles, combination vehicles need more space on the road because they are longer and they:
Need more space to turn and stop.
Drive more slowly.
Are twice the width.
Swerve more often.

Combination vehicles need more space on the road than other commercial vehicles because they are longer and need more space to turn and stop. It is especially important to properly manage space when you are operating a combination vehicle.

19. After starting the engine, oil pressure should reach a normal level:
Within a few seconds.
After about a minute.
After about four minutes.
Within 10 minutes of driving.

After you start the engine, keep an eye on the gauges. Oil pressure should rise to a normal level within a few seconds of the engine being started.

20. When entering a curve, you should:
Get off the roadway.
Use the shoulder.
Downshift.
Take the vehicle out of gear.

Always reduce your speed and downshift before entering a curve.

Your Progress
  • 0Incorrect (4 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20