New Jersey CDL DMV Endorsement Bus 2

Take 10 practice tests for CDL is the best way to prepare for your New Jersey DMV exam is by taking our free practice tests. The following question are from real New Jersey DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test

Number of Question

Passing score

13%

0Correct
0Incorrect

Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. As a general rule, student safety is best maintained by:

Keeping the students on the bus.

Letting some students evacuate the bus, while others stay on.

Letting students evacuate the bus.

Creating panic.

In most emergency situations, students will be safest and best kept under control if they do not evacuate the school bus.

2. The overhead inside mirror should be adjusted to see:

Outside of the driver’s side of the bus.

All of the students on the bus.

Students in the first four rows of the bus.

In front of the bus.

The top portion of the overhead inside rearview mirror should be positioned to display the top of the bus's rear window. This mirror positioning should allow the driver to see all of the students on the bus, including the heads of the students sitting immediately behind the driver.

3. During the basic control skills test, you can acquire points by:

Crossing over an exercise boundary.

Pulling up one time.

Exiting the vehicle one time to check your positioning.

Setting the parking brake.

The examiner will score the number of times your vehicle touches or crosses an exercise boundary line. Each encroachment will count as an error, resulting in points against your skills test score.

4. A blind spot extends at least ____ behind a school bus.

10 feet

50 feet

100 feet

1,000 feet

A school bus has blind spots immediately below the side flat mirrors, immediately in front of the side flat mirrors, and directly behind the rear bumper. Rear blind spots typically extend 50 to 150 feet behind a bus but can sometimes extend up to 400 feet, depending on the length of the vehicle.

5. When checking the air and electrical lines during a vehicle inspection, all of the following should be true, except:

The air hoses are making a hissing noise.

The air hoses and electrical lines are not cut.

The air lines are not pinched.

The air lines are not dragging against tractor parts.

When examining the air and electrical lines as part of your vehicle inspection test, you must listen for leaks. Ensure that the air hoses and electrical lines are not cut, chafed, spliced, or worn. Make sure air and electrical lines are not tangled, pinched, or dragging against tractor parts.

6. When performing a pre-trip inspection, you should make sure that:

The pedal surface has been smoothed out.

The gas pedal sticks.

Nothing is obstrucing the pedals.

There is something underneath the brake pedal.

When checking your vehicle's pedals during a pre-trip inspection, you should ensure that there is nothing under or around the pedals that will obstruct their use. Make sure the pedals are in proper working condition and that the surfaces of the pedals are grooved, if applicable.

7. During a vehicle inspection, ensure that the landing gear is:

Retracted.

Fully raised.

More worn on the passenger's side than on the driver's side.

Well lit.

When inspecting a trailer during a vehicle inspection test, ensure that its landing gear has no missing parts and that it is fully raised. The crank handle should be secure and the support frame should not be damaged.

8. When driving on the expressway during the skills test, you should:

Switch lanes frequently.

Use your mirrors to check traffic as needed.

Drive on the left side of the lane.

Drive above the posted speed limit.

During the on-road driving skills test, you may be asked to drive on an expressway. Make sure you maintain proper lane positioning, vehicle spacing, and vehicle speed. Continue to thoroughly check traffic in all directions while on the expressway.

9. When crossing railroad tracks, you should:

Stop on the tracks.

Change gears.

Try to pass.

Stay in your lane.

When crossing railroad tracks during the on-road driving skills test, you must not stop, switch gears, pass another vehicle, or change lanes while any part of your vehicle is in the crossing.

10. When stopping to pick up students, you should park at least 10 feet away from the students:

So they must walk to the bus, providing you with a better view of their movements.

Because it is difficult to get any closer to the students.

Because students should walk for exercise.

Because a student may show up late.

When picking up students at a bus stop, you should come to a complete stop with the front bumper of the bus at least 10 feet away from the students. This forces them to walk toward the bus, allowing you to keep an eye on their movements.

11. During a basic vehicle control skills test, you may be asked to:

Parallel park.

Inspect your tires.

Monitor your gauges.

Pull forward into a parking space.

Maneuvers that may be included in the basic vehicle control skills test include straight line backing, offset back/right parking, offset back/left parking, driver side parallel parking, conventional parallel parking, and alley docking.

12. The front of an enclosed trailer should:

Be swept clean.

Contain rags.

Not be used for cargo.

Be free of cracks.

When inspecting an enclosed trailer as a part of the vehicle inspection test, check the front area of the trailer for signs of damage, such as cracks, bulges, or holes.

13. When should you inspect the mirrors on a bus?

Before operating the bus

While operating the bus

After operating the bus

Is not necessary to inspect the mirrors.

The mirrors of a bus should always be inspected before a trip. Adjust them as necessary before beginning to drive.

14. When asked to complete a driver's side parallel parking maneuver, you should:

Pass the parking space while backing, then pull forward into it.

Pull forward past the parking space, then back into it.

Pull forward into the parking space without passing it first.

Back into the parking space without passing it first.

You may be asked to complete a parallel parking maneuver into a parking space that is to the left of your vehicle. You should drive past the parking space before backing into it while bringing the rear of your vehicle as close to the rear of the space as possible. Your vehicle should be completely within the boundaries of the space.

15. When you are approaching a bus stop, the students on your bus should:

Remain seated.

Stand up and collect their belongings.

Walk to the front of the bus and prepare to exit.

Ask the driver questions.

Students on a school bus should remain seated until they are told otherwise. It is unsafe for students to walk around the bus while it is moving.

16. When driving through a curve during the skills test, you should:

Veer from your lane if needed to complete the curve.

Reduce your speed after entering the curve.

Refrain from looking for other vehicles while turning.

Reduce your speed before entering the curve.

When approaching a curve during the on-road driving skills test, you must reduce your speed sufficiently before entering the curve so that you do not need to further brake or shift in the curve. Keep the vehicle in its lane and continue to check for traffic in all directions.

17. Before leaving a bus stop, a driver should:

Make sure no students are running to catch the bus.

Make sure students have placed their backpacks in the aisle.

Make sure students have opened the emergency vent.

Make sure students are facing the rear of the bus.

Before pulling away from a bus stop, a driver should make sure that there are no students running to catch the bus.

18. At a passive railroad crossing:

The decision to proceed rests with each driver.

The decision to proceed should be based on a control device.

The decision to proceed should be based on surrounding vehicles.

The decision to proceed is left to passengers in each vehicle.

Passive railroad crossings are not controlled by any traffic control devices. At such crossings, it is entirely a driver's responsibility to determine when it is safe to cross the tracks.

19. There are blind spots ____ left and right side flat mirrors.

Immediately below

In the middle of

Above

To the left of

There are blind spots immediately below and in front of each outside flat mirror. These mirrors have another blind spot directly behind the rear bumper.

20. During the steering box portion of the vehicle inspection test, you should not:

Ensure that the steering box is securely mounted.

Ensure that the steering box is free of leaks.

Look for missing bolts in the steering box.

Assume all cotter keys are present.

Before a trip, ensure that the steering box is securely mounted. Check for missing nuts, bolts, and cotter keys. Be sure that there are no power steering fluid leaks and that there is no damage to power steering hoses.

Try more CDL New Jersey Practice Test

Your Progress

0Incorrect (4 allowed to pass)
0Correct