New Hampshire MOTORCYCLE DMV Practice Test 4

Loads should kept low, either fastened securely or in saddlebags. Piling loads against a sissy bar or frame on the back of a seat is dangerous because it can raise the motorcycle's center of gravity and change the balance of the motorcycle. Loads should be equally distributed on both sides of the motorcycle.

To reduce the risk of being involved in a crash, ensure that you are visible to others on the road. Communicate your intentions through your turn signals, brake light, and lane position. Maintain an adequate space cushion, scan your path of travel 12 seconds ahead of your vehicle, and be prepared to act if any hazards arise.

When passing a row of parked cars, it is generally best to stay on the side of your lane that is not directly next to the cars. This will help to protect you from potential hazards like car doors being opened or people stepping out from between the cars. If there is traffic coming from the opposite direction, it is a good idea to stay in the center portion of the lane.

Motorcycles generally have two brakes, one for the front wheel and one for the rear wheel.

Most riders involved in crashes under-brake the front tire and over-brake the rear.

Never assume that other drivers see you, even if they make eye contact with you. It is not uncommon for drivers to look directly at a motorcyclist and still fail to notice them. Always reduce your speed when approaching an intersection.

Because of their size, motorcycles may seem to be traveling faster than they actually are.

Intersections present the greatest potential for conflict between motorcyclists and other drivers. Riders should use extra caution when approaching and riding through intersections.

Since all motorcycles are somewhat different, you should be very careful when using one that is new to you. Familiarize yourself with the motorcycle before setting off. Learn the gear pattern before riding by working the throttle, clutch, and brakes a few times.

When making a turn, look through the turn to where you want to go. Turn only your head, not your shoulders, and keep your eyes level with the horizon.

When parking a motorcycle next to a curb, you should create at a 90-degree angle with the curb by touching your rear wheel to the curb.

In addition to protecting your face from injury in a crash, a face shield protects you from wind, dust, dirt, rain, insects, and pebbles thrown up from surrounding vehicles.

Because motorcyclists are more vulnerable than the drivers of cars and trucks, appropriate use of signals by motorcyclists is even more important than it is for other drivers.

Choose a helmet that meets U.S. Department of Transportation (DOT) and state standards. It should fit you snugly all the way around and be free of obvious defects.

While riding in a staggered formation is usually best, a group should switch into a single-file formation when turning, taking curves, or entering or exiting a highway.

When riding, keep your knees against the gas tank to help maintain your balance in turns. Sit so that you can use your arms to steer rather than to prop yourself up. Sit far enough forward that your arms are slightly bent when you hold the handgrips, and keep your feet firmly on the footrests.

To reduce the risk of a collision, always allow merging vehicles plenty of space to safely enter traffic. Change lanes away from the entrance ramp if there is room to do so safely. If there isn't another lane available, adjust your speed to open up space for the merging driver.

Appropriate protective gear for motorcycling includes a jacket and pants made of leather or another sturdy material; footwear that covers and supports your ankles; and hearing protection, even if you wear a helmet.

When riding behind a passenger vehicle, it is usually best to ride in the center of the lane so you will be visible in the driver's rearview mirror. Most drivers check their rearview mirrors much more often than their side mirrors, so this lane position will increase your chances of being seen.

If one of your tires goes flat, hold both handle grips firmly, ease off of the throttle, and maintain a straight course. If you must brake, gradually apply the brake of the tire that is not flat (if you are certain of which tire that is). As you slow down, edge to the side of the road, squeeze the clutch, and stop.

When following a car, you should ride in a position that allows the driver to see you in their rearview mirror. Usually, that means riding in the center portion of the lane. Because most drivers check their rearview mirrors much more often than they check their side mirrors, being in this lane position increases the chance that they will see you.

To turn, a motorcycle must lean. To make the motorcycle lean, press on the handgrip in the direction of the turn.

A properly chosen lane position can optimize a number of safety factors. Your lane position should keep you out of other vehicles’ blind spots, increase your ability to see and be seen, help you avoid surface hazards, help you avoid wind blasts from other vehicles, and provide you with an escape route from any hazards that might arise. You should be positioned in a way that discourages other drivers from trying to share your lane.

You should use both brakes every time you slow or stop.

The right clothing can provide vital protection if you are involved in a collision. Always wear a jacket and pants that fully cover your arms and legs, even in warm weather. Clothing should fit snugly enough that it does not flap in the wind but should also be loose enough that your movement is not restricted.