New Hampshire MOTORCYCLE DMV Practice Test 3
Take 16 practice tests for MOTORCYCLE is the best way to prepare for your New Hampshire DMV exam is by taking our free practice tests. The following question are from real New Hampshire DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
An increased following distance is needed if your motorcycle will take longer than normal to stop. If the pavement is slippery, if you cannot see through the vehicle ahead of you, or if traffic is heavy and another driver may try to squeeze in front of you, open up to a longer following distance.
On average, a person's body can eliminate the alcohol content of about one drink per hour. The amount of time required to lower a person's blood alcohol content (BAC) can vary, so it is safest not to operate any motor vehicle after consuming any amount of alcohol.
Oily drippings from cars collect in a strip in the center of each lane. Unless the road is wet, this area still generally offers enough traction for motorcyclists to safely ride. You should still avoid riding on big buildups of oil and grease, often found at busy intersections or near toll booths.
To minimize your chances of being in a crash, you should make yourself as visible as possible by wearing brightly-colored clothing when riding, even during the day.
Riding with a sidecar increases the weight of a motorcycle and increases the braking force needed to stop the motorcycle. Slowing and stopping take longer when riding a vehicle downhill than when riding on a flat surface.
When riding on slippery surfaces, you should use both brakes to slow down. Squeeze the brake lever gradually to avoid locking the front wheel and use gentle pressure on the rear brake.
You should shift down through the gears with the clutch as you slow or stop. Stay in first gear while you are stopped so you can move quickly, if needed.
Instead of or in addition to mechanical turn signals, operators may use hand signals to indicate turns or stops. If an operator's left arm is bent at the elbow and pointing downward, it means the operator plans to slow down or stop.
When riding directly behind a car, it is usually safest to ride in the center portion of your lane. If you are riding in the center of the lane, you are most likely to be visible in the rearview mirror of the vehicle ahead. Most drivers check their rearview mirror more frequently than they check their side mirrors.
Experienced riders use a SEE strategy while riding to make safe judgements. "SEE" stands for Search, Evaluate, and Execute.
A plastic, impact-resistant face shield provides the greatest degree of protection for a wearer's eyes and face. Eyeglasses or sunglasses are not an adequate substitute. In Vermont, you are not legally required to wear eye or face protection if your motorcycle has a windshield, though it is recommended.
For your protection, you should wear pants that cover your entire legs and are made of leather or another sturdy synthetic material. Clothing should fit snugly enough that it does not flap in the wind but not so snugly that it restricts your movement.
To get maximum protection, use a motorcycle helmet that meets U.S. Department of Transportation (DOT) standards.
If you must brake and swerve to avoid a hazard, you should perform both actions separately. Brake then swerve, or swerve then brake. Do not do both at the same time.
Hand signals are an important part of communication when riding in groups. If a lead rider extends their left arm straight down with their palm facing back, the group of riders should come to a stop.
If you must stop quickly while in a curve, you should first straighten and square the handlebars, then stop. If straightening your motorcycle is not possible, you should apply the brakes smoothly and gradually, reduce your lean angle, then increase the brake pressure as you slow down.
While a properly chosen lane position can offer several advantages, you should be certain that your lane position will allow you to be seen by others and have an adequate space cushion.
Taking a turn too fast is dangerous. If you cannot hold the turn, you may end up turning into another lane or even off of the road entirely. Use caution when taking a turn.
To minimize your risk of a crash, ensure that you are visible to other drivers, communicating your intentions to other drivers, and maintaining a cushion of space around you. You should search for, identify, and separate hazards. Be prepared to react to anything that happens.
It is never safe to operate a motorcycle after consuming any amount of alcohol. Impairment of the skills needed to safely ride begins well below the legal limit.
On average, a person's body can eliminate the alcohol content of about one drink per hour. However, it is still possible for alcohol to accumulate in a person's system even if they consume only one drink per hour. This accumulation can still affect their ability to ride safely.
There is no single lane position that you always need to avoid. Adjust your position in response to changing conditions on the road.
The best way to deal with a tailgater is to get them in front of you. If you can do so safely, change lanes and let them pass. Increasing your speed may only encourage the driver to tailgate you at a higher speed.
It is a good idea to sound your horn before riding past a vehicle or pedestrian that may move into your lane. If you see a driver in an adjacent lane driving too closely to the vehicle ahead of them, you may assume that they want to pass and may cut in front of you to do so. If you see a person in the driver's seat of a parked car, or if you see a pedestrian or bicyclist in the street, it is a good idea to sound your horn as you pass.
To lessen the chances of a crash occurring, you should make yourself visible, communicate your intentions to others, maintain adequate space cushions, search your path of travel at least 12 seconds ahead, identify and separate hazards, and be prepared to react to changing conditions.
- 0Incorrect (5 allowed to pass)
- 0Correct