Nevada MOTORCYCLE DMV Practice Test 6

If you over-apply your brakes, you may lose traction on one or both wheels and crash.

When riding, it is safest for a motorcyclist to wear a helmet, eye protection, a jacket, long pants, sturdy boots, and gloves.

If your front wheel locks while braking, you should release the front brake immediately and completely before re-applying it smoothly.

In traffic, a motorcycle needs as much distance to stop as a car does.

Check your brake levers individually before every ride. Make sure each one feels firm and holds the motorcycle when the brake is fully applied.

A plastic, shatter-resistant face shield can provide protection for your entire face in the event of a crash. Goggles can protect your eyes, but not the rest of your face. A face shield also provides routine protection from dirt, dust, insects, rain, and pebbles.

Slow to a safe speed before beginning a turn and lean in the direction of the turn. Don't drag your feet on the roadway, as you could lose control if they catch on something. Always scan the roadway for other traffic.

Pre-ride motorcycle inspections are an important part of ensuring safe riding. Hydraulic fluids and coolants should be checked at least once a week.

The minimum number of drinks remaining in a person's system can be estimated by subtracting the number of hours since their last drink from the total number of drinks consumed. For example: a person who has consumed seven drinks in three hours would have a minimum of four drinks remaining in their system three hours later.

Any approved helmet will allow a rider to see as far to the sides as is necessary for safe riding. Approved helmets will have labels and markings providing the manufacturer's name, relevant information and instructions, and information about the standards the helmet meets.

When riding, sit so you are able use your arms to control the motorcycle rather than to hold yourself up. Your arms should be slightly bent when you are holding the handle grips. To help maintain your balance, keep your knees against the gas tank and your feet firmly on the footrests.

Before shifting into a lower gear, make sure you are riding slowly enough to shift safely. Downshifting while going too fast may cause the motorcycle to lurch and the rear wheel to skid. When riding downhill or shifting into first gear, you may need to use the brakes to slow to a safe speed before downshifting.

A properly chosen lane position should provide a number of benefits, including an increased ability to see others and to be seen. It should help you avoid wind blasts, other drivers' blind spots, and surface hazards. Your lane position should discourage other drivers from trying to share your lane and provide you with an escape route, should a hazard arise. Choose a lane position that maximizes your space cushion.

To reduce the risk of a collision when riding at night, be sure to reduce your speed and increase your following distance. Use the headlights of vehicles ahead of you to see farther down the road. You should always be flexible about your lane position, especially when riding at night.

A skidding rear tire is a dangerous condition that can result in a violent crash and serious injury or death. Too much rear brake pressure can cause the rear wheel to lock. As soon as the rear wheel locks, your ability to change direction is lost. To regain control, the brake must be released.

Oily drippings from cars and trucks build up in the center of each lane. Unless the road is wet, this strip usually still provides enough traction more a motorcycle to operate safely. The strip is generally narrow enough that you can ride to either side of it and still be in the center portion of the lane.

Appropriate clothing can reduce the risk of injury in a crash. Choose a jacket and pants that cover your arms and legs, are made of sturdy material, and are snug enough that they do not flap in the wind.

When taking normal turns, lean at the same angle as your motorcycle. However, in slow, tight turns, you should counterbalance the leaning motorcycle by keeping your body upright.

For riding, choose boots or heavy shoes that are tall and sturdy enough to cover and support your ankles. Heels should be low so that they won't catch on rough surfaces. Tuck in long laces so that they don't catch on the motorcycle's moving parts.

Intersections can be dangerous because they present the greatest degree of potential conflict between motorcyclists and other drivers.

It is recommended that you thoroughly check your motorcycle before every ride. Doing this can help you identify mechanical defects or equipment failures that could endanger you.

In addition to protecting your face from injury in a crash, a face shield protects you from wind, dust, dirt, rain, insects, and pebbles thrown up from surrounding vehicles.

To execute a swerve, press the handgrip on the side of your desired turn. Press on the opposite handgrip to return to your original direction after you are clear of the hazard.

When riding on slippery surfaces, reduce your speed, brake using both brakes, and avoid sudden moves. Avoid the center of the lane and instead follow tire tracks left by cars. Always keep an eye out for hazards that may make a road surface especially slippery, such as oil spots and loose gravel.

A motorcycle has blind spots just like any other vehicle. A rider must always turn their head to check for traffic before changing lanes.