Nevada MOTORCYCLE DMV Practice Test 15

A motorcycle's single brake light is not as noticeable as the two larger brake lights of a car or truck. It can be a good idea to flash your brake light to help others notice it, especially when you need to slow down more quickly than surrounding drivers may expect.

Because most crashes happen in broad daylight, you should always wear brightly-colored clothing while riding, even during the day.

Trying to enter a curve or turn at a speed that is too fast for conditions may cause you to cross into another lane of traffic or leave the road entirely.

To ride safely at night, you should reduce your speed, use your high beam headlight when you are not riding near other vehicles, and increase your following distance. Take advantage of vehicles ahead of you to provide clues about the upcoming road. Their headlights may help to illuminate the road ahead and their taillights will bounce up and down if the vehicle is being driven over bumps on the road.

There are several advantages to keeping groups of riders small. In comparison to a large group, a small group is easier for other vehicles to pass safely, is less likely to get separated by traffic or stop lights, and creates less need for slower riders to hurry to catch up to the rest of the group.

Motorcycles often seem to attract dogs. If you are being chased by a dog, downshift and approach it slowly. Then, as you approach the dog, accelerate and leave it behind.

When riding behind a car, you should position yourself so you can be seen in the other driver's rearview mirror. Riding in the center portion of the lane will generally ensure that you will appear in the middle of their rearview mirror, where the driver is most likely to notice you.

A plastic, shatter-resistant face shield provides protection for the wearer's entire face in the event of a crash. Goggles may protect someone's eyes, but not the rest of their face. A windshield is not an adequate substitute for either.

Engine braking by smoothly downshifting can be a useful option for motorcyclists. If you choose to engine brake, apply your brake lights separately to let other drivers know that you are slowing down.

A staggered formation is generally the best way for a group to maintain close ranks while also allowing each rider to maintain an adequate cushion of space. A single-file formation is preferable when taking curves, turning, or entering or exiting a highway.

Perform an inspection of your motorcycle before every ride. This takes only a few minutes and helps prevent dangerous situations before entering traffic.

A properly chosen lane position should provide a number of benefits, including an increased ability to see others and to be seen. It should help you avoid wind blasts, other drivers' blind spots, and surface hazards. Your lane position should discourage other drivers from trying to share your lane and provide you with an escape route, should a hazard arise.

To ride safely on a slippery surface, you should reduce your speed, avoid making sudden moves, and use both brakes when braking is necessary. Be alert to oily areas, dirt and gravel, and surfaces that stay wet or frozen longer than others.

More than half of all motorcycle crashes involve riders who have been using their motorcycle for less than six months. Most crashes take place in broad daylight when the riders are traveling at low speeds.

When you are being passed from behind or by an oncoming vehicle, stay in the center portion of your lane. Riding any closer to the passing vehicle can put you in danger.

If you are in the middle portion of your lane, you will have the greatest room for error if your control is disrupted by a wind blast from a passing vehicle.

Always use the proper turn signal before a turn or lane change. Use your mirrors and perform head checks before changing lanes to check for traffic surrounding your vehicle.

When riding in a group, you should maintain close ranks but still keep an adequate space cushion around each rider.

When preparing to pass another vehicle on its left, you should ride in the left portion of the lane to increase your line of sight and make yourself more visible to oncoming traffic.

To reduce the risk of being involved in a collision, you should ensure that you are always visible to others. Communicate your intentions through proper use of your signals, brake light, and lane position. Maintain a space cushion around your motorcycle and consistently scan the road ahead of, behind, and next to your vehicle. Always be ready to avoid unexpected hazards.

When hazards exist to your left, it is often best to ride in the right portion of the lane. Be prepared to adjust your lane position as road and traffic conditions change.

The clutch lever of a motorcycle is usually located on the left handgrip.

After mounting your motorcycle, you should make sure the clutch, throttle, horn, and brakes all work properly. Clean and adjust the mirrors and make sure that the fuel supply valve is open.

When riding, keep your knees against the gas tank to help maintain your balance in turns. Sit so that you can use your arms to steer rather than to prop yourself up. Sit far enough forward that your arms are slightly bent when you hold the handgrips, and keep your feet firmly on the footrests.

To reduce the risk of being involved in a crash, you should always ensure that you are visible to others. Communicate your intentions through proper use of your signals, brake light, and lane position. Maintain a space cushion around your motorcycle and consistently scan the road ahead of, behind, and next to your vehicle.