Nebraska MOTORCYCLE DMV Practice Test 5

There is no lane position that is always best and no lane position that should always be avoided. A responsible rider will adjust their position as road and traffic conditions warrant. If vehicles are on both the left and right sides of a rider, the center lane position is probably the safest option.

In comparison to flat mirrors, convex mirrors provide a wider view of the road behind you. They also make objects seem farther away than they actually are. Take the time to get used to your mirrors if your motorcycle is equipped with convex mirrors.

To determine upcoming road conditions when riding at night, use the vehicle ahead of you. For example, the headlights of the vehicle may provide a better view of the road than your own high beam. If the vehicle's taillights bounce up and down, this indicates the presence of bumps on the road.

A motorcyclist who is towing a trailer should increase their following distance. The added weight of the trailer means that the motorcycle will require more time to stop than it would otherwise.

When it starts to rain, avoid riding in the center of the lane. Instead, ride in the tire tracks left by cars ahead of you. The left tire track is often best for riding, but this can vary based on traffic and other conditions.

Protection should be your first consideration when buying a motorcycle helmet.

If the front wheel locks up while you are braking, release the pressure from the front brake. Immediately re-apply pressure to the brake with controlled gradual pressure.

Wearing brightly-colored or reflective clothing can increase your chances of being seen by other road users.

After riding over an object on the roadway, you should pull off the road to check your tires and rims for damage before traveling any farther. Ensure that nothing is caught in the drive chain or belt before proceeding.

Most motorcycle crashes happen in broad daylight. Wearing bright colors and reflective materials is always recommended when riding, even during the day.

When entering a curve, adjust your lane position to optimize your ability to see and be seen. Riding in the right portion of your lane when traveling through a lefthand curve may help you spot oncoming traffic as soon as possible. When traveling through a righthand curve, riding in a left center position may allow you to see oncoming cars early without putting you so close to the centerline that you could be hit by oncoming vehicles that take the curve too widely.

Motorcycle riders should use their brake lights to communicate with other road users. It is particularly important for a motorcyclist to flash their brake light before slowing down to make a tight, fast turn off of a high-speed roadway. Motorcyclists should flash their brake lights when slowing in any location where other drivers may not expect them to slow down.

Traction may be poor on surfaces such as wet, snowy, icy, or muddy pavement; gravel roads; lane markings; and steel plates and utility hole covers.

Grabbing at the front brake or jamming down on the rear brake can cause the brakes to lock. This may result in control problems.

It is best to change gears before starting a turn. Shifting gears while in the turn can cause a sudden change in power to the rear wheel, causing a skid. If you must change gears while in a turn, change gears smoothly to best prevent skidding.

It is best to change gears before starting a turn. However, if you must shift while turning, shift smoothly. A sudden change in power to the rear wheel can cause a skid.

An expanded cushion of space is needed if your motorcycle will take longer than normal to stop. If the pavement is slippery, if you cannot see through the vehicle ahead of you, or if traffic is heavy and another driver may try to squeeze in front of you, open up your following distance.

When riding, you should be positioned so that you are able to easily operate all controls. Sit with your arms slightly bent and use your arms to steer rather than to hold up your body. Keep your knees against the gas tank to help maintain your balance during turns.

You should increase your following distance if it will take your motorcycle longer than normal to stop, if you can't see through the vehicle ahead of you, or if traffic is heavy and other vehicles are likely to try to squeeze in front of you.

When approaching a blind intersection, move into the lane position that makes you the most visible to surrounding drivers.

Taking a turn too fast may cause a rider to cross into another lane of traffic, or even leave the road entirely. It is important to slow down before entering a turn or curve.

There is no single lane position that is always best and no single lane position that should always be avoided. Vary your lane position as road and traffic conditions warrant.

When being passed, the center portion of the lane is generally the safest lane position for a motorcyclist. Riding on the side nearest the passing vehicle increases the risk of colliding with it. Riding on the side farthest from the passing vehicle can also be dangerous because it may prompt the driver to return to your lane before it is safe to do so.

Regulatory signs are white signs with red and black markings that inform drivers of specific traffic laws in the indicated area. This sign indicates that U-turns are prohibited.

When following a car, you should ride in a position that allows the driver to see you in their rearview mirror. Usually, that means riding in the center portion of the lane. Because most drivers check their rearview mirrors much more often than they check their side mirrors, being in this lane position increases the chance that they will see you.