Over 95% pass rate when practice at DMV Practice Test

Nebraska CAR DMV Practice Test 21

Take 24 practice tests for CAR is the best way to prepare for your Nebraska DMV exam is by taking our free practice tests. The following question are from real Nebraska DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test
24
Number of Question
25
Passing score
20
13%
  • 0Correct
  • 0Incorrect
Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. It is unlawful to operate a motor vehicle on any public roadway when the vehicle is equipped with a television screen that is visible to the driver.
True
False

It is illegal to operate a vehicle that is equipped with a television screen that is visible to the driver.

2. Drowsy drivers:
Should drink strong black coffee to stay awake.
Can drive so poorly that they may appear to be drunk.
Can stay alert by opening a window and turning up the radio.
Are usually only older drivers.

Drowsiness can make people drive so poorly that they appear to be drunk. Opening a window, turning on the radio, or drinking coffee is not enough to make a drowsy driver alert to roadway hazards.

3. When turning left at an intersection:
You should always yield to oncoming traffic and pedestrians.
Oncoming traffic and pedestrians should yield to you.
You should never yield to oncoming traffic and pedestrians.

When turning left at an intersection, yield the right-of-way to oncoming traffic and pedestrians. Once the intersection is clear and applicable signals allow, you may complete the turn.

4. To safely pass a bicycle, you should:
Honk at the bicyclist to let them know you're trying to pass.
Drive in the bicycle lane until you get a chance to pass.
Slow down and give them as much space as possible.
Rush ahead to pull in front of the bicyclist.

When passing a bicyclist, slow down and give them as much space as you can. Bicyclists have much less protection than drivers of motor vehicles and they should not be crowded. Passing a bicycle too quickly can shift the bicyclist off-course.

5. If oncoming headlights are blinding you while you are driving at night, you should:
Look toward the right edge of the road.
Switch your lights to high beams.
Turn your lights on and off.

If the headlights of an oncoming vehicle are blinding, glance toward the right edge of the road instead of looking directly ahead. This should keep your vehicle safely on the road until you pass the oncoming vehicle.

6. When operating a motor vehicle, it is a secondary offense to use a handheld wireless communication device:
To read, type, or send written communication.
As a radio.
As a GPS navigation device.
To play music.

It is a secondary offense to use a handheld wireless communication device to read, type, or send written communication while operating a motor vehicle. Violation of this law will result in a fine ranging from $200 to $500.

7. Unless otherwise posted, the speed limit in a business district is:
20 miles per hour.
25 miles per hour.
30 miles per hour.

The speed limit in a business district is ordinarily 20 miles per hour. If another speed limit is posted, follow the posted limit.

8. Which of the following factors affect an individual's absorption of alcohol?
Weight
Height
Intelligence

Factors affecting a person's absorption of alcohol include the person's weight, their biological sex, the amount of food in their digestive tract, and the number of alcoholic beverages they have consumed. The only thing to do to remove alcohol from a person's system is to wait.

9. This sign is a:
/data/image/dmv_image/car/nebraska-yield.png
Yield sign.
School crossing sign.
Stop sign.

A downward-facing triangular sign is always a yield sign. Drivers must be prepared to slow down or stop when approaching a yield sign.

10. If a vehicle using high beams comes toward you, you should look toward ____ of the road.
Either side
The center
The right side
The left side

If a vehicle approaching you is using its high beams and fails to dim them, you should glance toward the right side of the road. This will keep you from being blinded by the other vehicle’s headlights and will allow you to see well enough to stay on your course until the vehicle passes.

11. This sign means:
/data/image/dmv_image/car/indiana-steep_downgrade.png
Steep downgrade.
Crossroad ahead.
No right turn.
Narrow bridge.

Warning signs prepare drivers for upcoming road conditions and hazards and are usually yellow with black markings. This sign warns drivers about an upcoming steep hill. They should adjust their speed accordingly to avoid brake damage or collision.

12. Never park a vehicle:
In front of a public or private driveway.
Within 20 feet of a crosswalk at an intersection.
Within 30 feet of any flashing signal located on the side of the roadway.
All of the above.

There are a number of locations where it is prohibited to stop or park your vehicle. Among these locations are in front of a public or private driveway; within 20 feet of a crosswalk; and within 30 feet of any stop sign, flashing signal, yield sign, or other traffic control device located on the side of the roadway.

13. When a stop is required at an intersection and no markings appear to indicate a stop line or crosswalk, a driver:
Is not required to stop.
Is required to slow down to make sure crossing traffic is clear.
Should stop only at a place where they can see at least 200 feet on either side, even if they have to enter the intersecting roadway.
Should stop where they have a clear view of approaching traffic before they enter the intersecting roadway.

If there is no stop line or crosswalk, you should stop at the point nearest to the intersecting roadway where you can get a view of approaching traffic. You should not enter the intersecting roadway to gain a better view.

14. When driving on the interstate, you should use the left lane:
To exit.
To overtake or pass another vehicle.
Before crossing the median.

On an interstate highway, you should stay in the right lane unless you are passing another vehicle. You should not exceed the speed limit when passing.

15. A driver should:
Stare directly in front of their car.
Only focus on the middle of the road.
Watch beside, ahead, and to the rear of their car.

A driver should watch beside, ahead, and to the rear of their car. To be a good driver, you must know what is happening all around your vehicle.

16. At an intersection with a stop sign, you should stop and:
Check your rearview mirror for cars tailgating.
Move when the vehicle ahead of you moves.
Look right first, then left, then right again.
Look left first, then right, then left again.

When stopped at an intersection, you should first look to your left, as vehicles coming from the left are closer to you than vehicles coming from the right. Look to your right, then look to your left again, in case there are any vehicles coming from that direction that you did not see at first glance.

17. If a flagger is directing traffic in a construction zone, you must:
Follow the directions given by the flagger.
Copy what surrounding traffic is doing, despite the flagger's instructions.
Assume the flagger is not supposed to be directing traffic.
Follow the laws that would be in place if the area was not under construction.

Be prepared to reduce your speed and use caution when directed to do so by a sign, flagger, or law enforcement officer. Failure to do so is illegal and is dangerous to those working in construction zones.

18. To help others see you when daylight begins to fade, you should use your:
Parking lights.
Low beam headlights.
Emergency flashers.

As daylight begins to fade, turn on your low beams to help others see you. Only use your high beam headlights in an open area where no other drivers are present.

19. While driving on the interstate, you see vehicles on the entrance ramp to your right. You should:
Increase your speed to beat the vehicles that are on the entrance ramp.
Stay in your lane.
Merge left to allow them space for a smooth, safe entry.

When you are driving on the interstate and see vehicles on an entrance ramp to your right, you should signal and move to the left to allow them a smooth and safe entry. If it is unsafe to merge left, adjust your speed to help the incoming traffic merge.

20. When approaching a railroad crossing, you should:
Slow down.
Look for a train.
Be ready to stop.
All of the above.

When you see any signs indicating a nearby railroad crossing, you should slow down, look for a train, and be ready to stop. If the red warning lights are flashing or the gate is down, you must stop 15 to 50 feet before the railroad tracks. Do not try to go around the gate.

21. This sign means:
/data/image/dmv_image/car/illinois-signal_ahead.png
Traffic signal ahead.
Stop.
Yield the right-of-way.

This sign warns of of an approaching traffic signal.

22. Hydroplaning occurs when tires ride on a thin film of water instead of on the surface of the road. To prevent hydroplaning in rainy weather, you should:
Put on your cruise control to maintain a constant speed.
Decrease your speed.
Move to the shoulder of the road as soon as it starts to rain.

In rainy weather, you should lower your speed to reduce the risk of hydroplaning. Driving too fast may cause your tires to ride up on the water and lose contact with the surface of the road, making it very difficult to control your vehicle.

23. This sign means:
/data/image/dmv_image/car/indiana-merging_traffic.png
Merging traffic.
Multiple turns.
Lane shifting.
Do not block intersection.

Warning signs prepare drivers for upcoming road conditions and hazards and are usually yellow with black markings. This sign alerts drivers to potential traffic merging from the right. Drivers should prepare to allow the traffic to merge safely.

24. Braking distance is affected by:
The speed your vehicle is traveling.
The condition of your brakes and tires.
The condition of the pavement.
All of the above.

Factors that can affect braking distance include how fast your vehicle is traveling, the condition of your brakes and tires, and the condition of the pavement.

25. Flashing arrow panels used in work zones:
Indicate where drivers must pull onto the shoulder of the road and stop.
Guide drivers into certain traffic lanes and inform them that part of the upcoming roadway is closed.
Are only used on the Interstate Highway System.

Large flashing arrow panels may be used in work zones to guide drivers into certain traffic lanes and to inform them that part of the upcoming roadway is closed. Drivers should follow all provided instructions in a work zone.

Your Progress
  • 0Incorrect (5 allowed to pass)
  • 0Correct
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25