Montana CDL DMV Endorsement Hazmat 2
Take 10 practice tests for CDL is the best way to prepare for your Montana DMV exam is by taking our free practice tests. The following question are from real Montana DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.
- 0Correct
- 0Incorrect
Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.
If a shipping paper describes both hazardous and non-hazardous materials, the hazardous materials must be distinguished in one of three ways. They must be entered first on the shipping paper, highlighted in a contrasting color, or properly marked with an "X" in a column titled "HM."
When marking hazardous materials in an "HM" column on a shipping paper, the letters "RQ" may be used instead of an "X" if a reportable quantity of the material must be identified.
Shippers must retain a physical copy or an electronic image of hazardous materials shipping papers for a minimum of two years after the materials are accepted by the initial carrier. For hazardous waste, this increases to three years.
Column 2 of the Hazardous Materials Table lists the proper shipping names and descriptions of regulated materials.
Flammable gases are assigned to hazardous materials Class 2.
Except when parking briefly to perform necessary functions for vehicle operation (such as refueling), never park a vehicle carrying Division 1.1, 1.2, or 1.3 explosives within 300 feet of a bridge, tunnel, or building. Never park such a vehicle within five feet of the traveled portion of a road. Such vehicles should be parked only briefly.
A person should not smoke within 25 feet of a placarded tank that is used to transport Class 3 (flammable liquids) or Division 2.1 (gases) materials. Additionally, no person should smoke or carry a lit cigar, cigarette, or pipe within 25 feet of any vehicle containing Class 1 (explosives), Class 4 (flammable solids), or Class 4.2 (spontaneously combustible).
To determine which placards need to be used, you must know the hazard class of the materials being shipped, the amount of hazardous materials being shipped, and the total weight of all hazardous materials in your vehicle.
Use a floor lining when transporting Division 1.1, 1.2, or 1.3 materials. The floors should be tight and the liner must be made from either non-metallic material or non-ferrous metal. Non-ferrous metals are metals that do not contain iron or iron alloys.
You must have a commercial driver license with a hazardous materials endorsement before driving a vehicle of any size that is used to transport hazardous materials, even if the vehicle is not transporting hazardous materials at the time of operation.
Shippers must place diamond-shaped hazard warning labels on most packages of hazardous materials. If the label won't fit on the package, it can be placed on a tag that is securely attached to the package.
When transporting hazardous materials, shipping papers should be kept in a pouch in the driver's side door, or in another location where the driver is able to easily reach them while their seat belt is fastened. The papers must be easily visible to anyone who is entering the cab.
Before loading or unloading a tank with flammable liquids, you should turn off the engine, unless running the engine is necessary to operate a pump. Ground the tank before opening the filling hole and maintain the ground until after closing the filling hole.
When loading hazardous materials, do not use hooks or tools that could damage containers or other packaging.
Containers of hazardous materials should be braced so they will not fall, slide, or bounce around during transportation.
Shipping papers for hazardous materials should always be easily accessible. When a driver is not in their vehicle, hazardous materials' shipping papers should be left on the driver's seat.
If you discover a cargo leak while transporting hazardous materials, use the shipping papers, label, or package location to identify which materials are involved. Do not try to touch or smell the leaking materials to determine what they are because doing so could result in injury or death.
Some radioactive materials are required to be accompanied by a transport index. A transport index is a number that indicates how much control the material will require during transport. The total transport index of all cargo in a single vehicle may not exceed 50.
The use of cargo heaters is not always permitted. When transporting materials that are categorized as Class 1 (Explosives), Class 2.1 (Flammable Gas), or Class 3 (Flammable Liquids) materials, heaters are generally prohibited.
A hazardous material will be placed into one of nine classes to explain the type of risks associated with the material.
If the words "Inhalation Hazard" appear on the shipping paper or package, you must display the "Poison Inhalation Hazard" or "Poison Gas" placards, as appropriate.
A material's ID number must appear on its accompanying shipping paper as well as on its packaging. It also must appear on cargo tanks and other bulk packaging.
A person attending a placarded vehicle must be awake inside the vehicle or otherwise within 100 feet of the vehicle; know the hazards associated with the materials; know what to do in an emergency; and be able and authorized to move the tank if necessary.
Parts of a vehicle that have been exposed to corrosive liquids must be thoroughly washed with water.
You should not smoke within 25 feet of a placarded cargo tank used to transport materials that are categorized as Class 3 (flammable liquids) or Division 2.1 (gases). Do not smoke or carry a lit cigar, pipe, or cigarette near a vehicle containing flammable or explosive materials.
The person in charge of loading or unloading a hazardous materials cargo tank must ensure that a qualified person is always supervising the process. The supervisor must be alert; have a clear view of the tank; be within 25 feet of the tank; know the hazards of the involved materials; know the procedures to follow in the case of an emergency; and be authorized to and capable of moving the tank.
When applying for an original or renewed HazMat endorsement, you must undergo a federal security threat assessment done by the Transportation Security Administration (TSA).
If your vehicle breaks down on the road while you are transporting explosive materials, you must warn other drivers. Put out warning signals like reflective triangles or electric lights if you are carrying Division 1.1, 1.2, or 1.3 explosives. Do the same if you are driving a tank used to transport Class 3 flammable liquids or Division 2.1 flammable gases, even if the tank is empty. If transporting flammable materials, do not use warning signals that could cause your cargo to catch fire.
Radioactive materials are categorized as Class 7 hazardous materials.
It is the responsibility of a carrier to refuse improper shipments of hazardous materials.
Try more CDL Montana Practice Test
- 0Incorrect (6 allowed to pass)
- 0Correct