Montana CDL DMV Endorsement Bus 2

Take 10 practice tests for CDL is the best way to prepare for your Montana DMV exam is by taking our free practice tests. The following question are from real Montana DMV practice test. More than 95% people pass a DMV exam when practice at DMV Practice Test.

Number of Test

Number of Question

Passing score

13%

0Correct
0Incorrect

Not enough to pass :-(

Ouch! While you were on a roll there for a few questions, you didn’t pass this time. But I know this test, and I think you’ll pass next time. Really.

1. During the on-road driving test, you must do all of the following, except:

Wear your safety belt.

Obey all traffic laws.

Complete the test without a moving violation.

Obey all traffic signs and signals, but only if other traffic is present.

You must drive in a safe and responsible manner during the on-road driving test. This includes wearing your safety belt; obeying all traffic signs, signals, and laws; and completing the test without an accident or moving violation.

2. What should be used to check for proper tire inflation?

A tire gauge

A tire iron

An air compressor

A lug nut

During the vehicle inspection test, you must use a tire gauge to check for proper tire inflation. You will not receive passing credit if you simply kick the tires.

3. When taking the on-road driving test, you must do all of the following, except:

Wear your safety belt.

Obey all traffic signs.

Complete the test without an accident.

Demonstrate that you can use your cell phone while driving.

During the on-road driving test, you must drive in a safe and responsible manner; wear your safety belt; obey all traffic signs, signals, and laws; and complete the test without any accidents or moving violations.

4. If there is a fire on a school bus, the students:

Must be evacuated.

Should stay on the bus but be moved to a part of the bus unaffected by the fire.

Should stay in their seats.

If a school bus is on fire, or if there is a threat of fire, it is mandatory for a bus driver to evacuate the students from the bus.

5. If you must drive during periods of high winds, you should:

Loosen your grip on the steering wheel.

Increase your speed.

Reduce your speed.

A school bus's long sides are vulnerable to being pushed by winds. If you must drive in windy conditions, you should maintain a strong grip on the steering wheel, try to anticipate wind gusts, and slow down. If necessary, contact your dispatcher for instructions on how to proceed.

6. When checking tire condition during the vehicle inspection, you should:

Ensure that the insides of the tires are more worn than the outsides of the tires.

Ensure that the outsides of the tires are more worn than the insides of the tires.

Ensure that the middles of the tires are more worn than the outsides of the tires.

Ensure that the tires have even wear.

When examining your tires during the vehicle inspection test, you should ensure that treads are evenly worn.

7. The inside rearview mirror is used to:

See passengers.

See potential hazards on the road.

See vehicles trying to switch lanes.

The overhead inside rearview mirror in a school bus is used to monitor passenger activity inside the bus.

8. After driving over a bridge during the driving skills test, you may be asked to recall.

The posted weight limit.

The color of a sign you just passed.

How many lanes of traffic there were on the bridge.

If there was a crosswalk on the bridge.

If you drive over a bridge during the on-road driving skills test, the examiner may ask you afterwards to recall the bridge's posted weight limit.

9. Properly adjusted mirrors on a school bus allow the driver to see ____ behind the bus.

One bus length

Two bus lengths

Three bus lengths

Four bus lengths

Proper mirror adjustment is vital to the safe operation of a school bus. A bus's flat mirrors should be adjusted so the driver is able to see 200 feet, or four bus lengths, behind the bus.

10. When crossing railroad tracks, you should:

Not stop.

Try to pass slower vehicles.

Change lanes.

Put the vehicle in neutral.

When crossing railroad tracks during the on-road driving skills test, you must not stop, change gears, pass another vehicle, or change lanes while any part of your vehicle is in the railroad crossing.

11. During a vehicle inspection, ensure that lug nuts are all of the following, except:

Free of cracks.

Free of distortions.

Loose.

Free of rust.

During a vehicle inspection test, you must ensure that all lug nuts are present, free of cracks and distortions, and showing no signs of looseness, such as rust trails or shiny threads. Verify that all bolt holes are free of cracks and distortions.

12. Your vehicle's final position should be:

Exactly where the examiner has instructed it to be.

Within five feet of the final position described by the examiner.

Wherever you can safely park.

Within two feet of the final position described by the examiner.

You should finish each exercise with your vehicle in the exact position described by the examiner. You can be penalized for failing to complete an exercise exactly in the manner described by the examiner, potentially resulting in failure of the basic control skills test.

13. An encroachment is when:

A driver does not appear for their scheduled basic skills test.

A vehicle touches an exercise boundary line during the basic skills test.

A driver fails one section of the basic skills test.

An encroachment during the basic vehicle control skills test is when an exercise boundary line is touched or crossed by any portion of the applicant's vehicle. Every encroachment will be counted as an error.

14. When performing the stop/start maneuver as a part of the skills test, you should:

Cut off other vehicles if needed to get onto the shoulder.

Not use any turn signals.

Slam on the brakes to stop as quickly as possible.

Decelerate smoothly.

During the on-road driving skills test, you will be asked to pull your vehicle over to the side of the road and stop as if you were going to get out and check something on your vehicle. As you prepare to make this stop, you must check traffic; activate your turn signal; decelerate smoothly with even braking, changing gears as needed; and bring your vehicle to a full stop without coasting.

15. Before evacuating a bus in response to a hazard, a driver should:

Ask the students if they want to leave.

Explain the hazard to the dispatcher and make a decision on how to respond.

Tell students to panic.

Have students open all the windows.

In most emergency situations, students will be the safest and the easiest to supervise if they are not evacuated from the school bus. If there is time, the driver should contact their dispatcher to explain the emergency situation before making the decision to evacuate.

16. If you come to railroad tracks while driving a school bus, you should generally:

Check the tracks, but continue driving without stopping.

Stop 15 to 50 feet before the nearest rail.

Stop 75 feet before the nearest rail.

In general, school bus drivers should stop before any railroad crossings to check the tracks for approaching trains. Drivers should stop no closer than 15 feet and no farther than 50 feet from the nearest rail in order to have the best view of the tracks. They should look and listen for approaching trains before proceeding through the crossing.

17. When asked to make a turn while taking your driving test, you should:

Use your turn signal, but only if other cars are present.

Check traffic only in the direction of the turn.

Check traffic in all directions.

When asked to make a turn during the on-road driving test, you must check traffic in all directions and use your turn signal.

18. When driving on the expressway during the skills test, you should:

Switch lanes frequently.

Use your mirrors to check traffic as needed.

Drive on the left side of the lane.

Drive above the posted speed limit.

During the on-road driving skills test, you may be asked to drive on an expressway. Make sure you maintain proper lane positioning, vehicle spacing, and vehicle speed. Continue to thoroughly check traffic in all directions while on the expressway.

19. When asked to complete a conventional parallel parking maneuver, you should:

Pass the parking space while backing, then pull forward into it.

Pull forward past the parking space, then back into it.

Pull forward into the parking space without passing it first.

Back into the parking space without passing it first.

You may be asked to complete a conventional parallel parking maneuver into a parking space that is to the right of your vehicle. You should drive past the parking space before backing into it while bringing the rear of your vehicle as close to the rear of the space as possible. Your vehicle should be completely within the boundaries of the space.

20. Once stopped as part of the stop/start maneuver, you should:

Apply the parking brake.

Keep the vehicle in first gear.

Be perpendicular to the curb.

Be blocking a driveway.

When parking as a part of the stop/start maneuver during the on-road driving skills test, you must apply the parking brake. The gears should be shifted into neutral or park. You must be parked parallel to the curb and should not be blocking any driveways or intersections.

Try more CDL Montana Practice Test

Your Progress

0Incorrect (4 allowed to pass)
0Correct