Missouri MOTORCYCLE DMV Practice Test 8

The best way to handle a tailgater is to get them in front of you. If you can do so safely, change lanes and let them pass. Speeding up may only increase the danger by causing them to continue tailgating you at a higher speed.

Most drugs taken to ease headaches, colds, hay fever, allergies, or nerves can make the consumer drowsy and may impair their ability to ride safely. When taking a medication, it is important for a rider to know how the drug affects their body before riding.

A plastic, shatter-resistant face shield can provide protection for your entire face in the event of a crash. Goggles can protect your eyes, but not the rest of your face. A face shield also provides routine protection from dirt, dust, insects, rain, and pebbles.

The surest way to avoid the risks of riding under the influence of alcohol is to not ride after you have been drinking. Any amount of alcohol can impair your abilities.

While a staggered formation is usually best for group riding, a group should switch into a single-file formation when taking curves, turning, or entering or exiting a highway.

Never rely on eye contact as an assurance that a driver will properly yield to you. It is common for drivers to look directly at motorcyclists and still fail to notice them.

Because motorcycles are small in stature and have fewer and smaller lights than other vehicles, they can be difficult to see. For your safety, it is best to ride defensively and assume that others on the road do not see you.

Always be flexible about your lane position, especially when riding at night. Be especially careful to employ safe riding strategies when riding under conditions that are less than ideal.

Riding alongside another vehicle is dangerous because you could be riding in the vehicle's blind spot. The driver may enter your lane without warning if they can't see you. The vehicle will also block your route of escape if a hazard arises.

A motorcycle requires more frequent attention than a car. Make a complete check of your motorcycle before every ride.

When passing a row of parked cars, it is generally best to stay on the side of your lane that is not directly next to the cars. This will help to protect you from potential hazards like car doors being opened or people stepping out from between the cars. If there is traffic coming from the opposite direction, it is a good idea to stay in the center portion of the lane.

There is no single lane position that you always need to avoid. Adjust your position in response to changing conditions on the road.

There is no single lane position that is always best and no single lane position that should always be avoided. Vary your lane position based on changing road and traffic conditions.

When being passed, you should not ride on the side of your lane that is farthest from the passing vehicle. Doing so may tempt the driver to return to your lane before there is actually room for them to do so safely.

Oily drippings from cars collect in a strip in the center of a traffic lane. Unless the road is wet, this area will generally still provide enough traction for motorcyclists to ride safely. Because the strip is usually no more than two feet wide, it is often possible to ride to one side of the strip and still be in the center portion of the lane.

A plastic, shatter-resistant face shield protects your entire face in a crash. Goggles protect your eyes, but not the rest of your face. A windshield is not an adequate substitute for a face shield or goggles.

A staggered formation is generally the best way for a group to maintain close ranks while also allowing each rider to maintain an adequate cushion of space. A single-file formation is preferable when taking curves, turning, or entering or exiting a highway.

Before each ride, you should check the air pressure, tread, and general wear of your tires.

A properly chosen lane position should provide a number of benefits, including an increased ability to see others and to be seen. It should help you avoid wind blasts, other drivers' blind spots, and surface hazards. Your lane position should discourage other drivers from trying to share your lane and provide you with an escape route, should a hazard arise.

When riding on slippery surfaces, reduce your speed, brake using both brakes, and avoid sudden moves. Avoid the center of the lane and instead follow tire tracks left by cars. Always keep an eye out for hazards that may make a road surface especially slippery, such as oil spots and loose gravel.

To reduce the risk of a collision when riding at night, be sure to reduce your speed and increase your following distance. Use the headlights of vehicles ahead of you to see farther down the road. Use your high beam headlight, except when following or meeting another vehicle.

You should always use both brakes every time you slow or stop.

When being passed, motorcyclists should be careful not to be hit by any part of the passing vehicle, including its mirrors. In addition to the vehicle itself, motorcyclists should be aware of wind gusts coming from the passing vehicle and potential objects being thrown by a passenger in the vehicle who may not be paying attention to the road.

Motorcycles have blind spots, just like any other vehicle. Always turn your head to check your blind spot before changing lanes. Head checks should be a regular part of your scanning routine.

The minimum number of drinks remaining in a person's system can be estimated by subtracting the number of hours since their last drink from the total number of drinks consumed. For example: a person who has consumed seven drinks in three hours would have a minimum of four drinks remaining in their system three hours later.